Water Poured or Emptied from One Container into Another of a Different Shape
Quantitative Aptitude › Mensuration – 3D · Topic 19.8
When water is poured from one container into another, the volume of water stays the same, so the volume in the first container equals the volume in the second. The new water level is the volume divided by the base area of the second container.
6 min read · Quantitative Aptitude · Mensuration – 3D
Quick Answer
When water is poured from one container into another, the volume of water stays the same, so the volume in the first container equals the volume in the second. The new water level is the volume divided by the base area of the second container.
At a Glance
- Key rule Volume of water is conserved
- Water level Volume / base area
- Cone into cylinder Height = one third (same radius)
- Litres cm³ / 1000, m³ × 1000
- Immersed solid Rise = volume / base area
- Pipe flow per second πr² × speed
Where Does It Fit?
This topic uses the volume formulas of Volume and Surface Area of Cube and Cuboid, Volume and Surface Area of Cylinder and Volume and Surface Area of Cone and Frustum of a Cone together with conservation of volume from Problems on Combination of Solids and Melting/Recasting of Solids. The next topic, Length of the Diagonal of a Cube or Cuboid, returns to the diagonal of a cuboid.
How Do You Solve Water-Transfer Problems?
In short: equate the volume of water before and after, then divide by the base area to get the level.
- Find the volume of water in the first container.
- Write the volume in the second container as base area × height of water.
- Equate the two volumes and solve for the unknown.
- Use the same unit throughout; 1 litre = 1000 cm³.
| From | To | Result |
|---|---|---|
| Cylinder r = 14, h = 21 | Tank 44 by 28 | Level = 12936/1232 = 10.5 |
| Cone r = 7, h = 24 | Cylinder r = 7 | Height = 8 (one third of 24) |
| Cube edge 10 | Cylinder r = 5 | Height = 1000/(25π), about 12.74 (π = 3.14) |
How Do Immersed Solids and Rainfall Problems Work?
In short: an immersed solid displaces its own volume of water, and rainfall volume is area times depth.
- Immersed solid: level rise = volume of solid / base area. A sphere of radius 3 dropped in a cylinder of radius 6 raises the level by 36π/(36π) = 1 cm.
- Rainfall: 5 cm of rain on 1 hectare (10,000 m²) is 10,000 × 0.05 = 500 m³.
- Ice and melting: ice melted into a container of the same shape reduces the volume of ice to the water volume only if density is the same, which the problem will state.
How Do You Handle Pipe and Flow Problems?
In short: the volume flowing per second is the pipe cross-section times the speed of the water.
- Flow rate: πr² × speed. A pipe of radius 7 cm with water at 3 m/s gives (22/7)(0.07)²(3) = 0.0462 m³ per second, which is 46.2 litres per second.
- Time to fill: tank volume / flow rate. A tank of 24 m³ fills in 24,000/46.2 = 519.5 seconds.
- Link to rates: combined pipes follow the ideas of Pipes and Cisterns – Filling and Emptying Problems.
Solved Examples
Example 1
Question: Water from a cylindrical vessel of radius 14 cm and height 21 cm is poured into a rectangular tank of base 44 cm by 28 cm. Find the height of water in the tank. Use π = 22/7.
- Water volume = (22/7)(196)(21) = 12936.
- Base area of tank = 44 × 28 = 1232.
- Height = 12936/1232.
Answer: 10.5 cm.
Example 2
Question: A conical vessel of radius 7 cm and height 24 cm is full of water. It is emptied into a cylindrical vessel of radius 7 cm. Find the height of the water.
- Cone volume = (1/3)π(49)(24) = 392π.
- Cylinder: π(49)h = 392π.
Answer: h = 8 cm.
Example 3
Question: A sphere of radius 3 cm is dropped into a cylindrical vessel of radius 6 cm partly filled with water. By how much does the water level rise?
- Sphere volume = (4/3)π(27) = 36π.
- Base area = 36π.
- Rise = 36π/36π.
Answer: 1 cm.
Example 4
Question: Water flows through a pipe of radius 7 cm at 3 m/s. How many litres flow per second? Use π = 22/7.
- Radius = 0.07 m.
- Volume per second = (22/7)(0.0049)(3) = 0.0462 m³.
- Litres = 0.0462 × 1000.
Answer: 46.2 litres per second.
Example 5
Question: How many cubic metres of water fall on 1 hectare in a 5 cm rainfall?
- 1 hectare = 10,000 m².
- Depth = 0.05 m.
- Volume = 10,000 × 0.05.
Answer: 500 m³.
Shortcuts and Tricks
- Cone to cylinder of the same radius: height of water is one third of the cone’s height.
- Equate volumes first, then cancel π and common factors.
- Level change = volume / base area, in the same units.
- Flow rate = cross-section × speed; convert units to metres or centimetres consistently.
- 1 m³ = 1000 litres and 1 hectare = 10,000 m².
Common Mistakes
- Using the surface area instead of the base area for the level.
- Forgetting to convert cm³ to litres.
- Using the diameter of the pipe as the radius.
- Using the full height of the vessel instead of the water height.
- Mixing metres and centimetres in the flow-rate calculation.
Practice Questions
- A cone of radius 6 cm and height 15 cm is emptied into a cylinder of radius 6 cm. What is the height of water?
- A cube of edge 11 cm is immersed in a rectangular tank of base 22 cm by 11 cm. What is the rise in level?
- How many litres does a cylinder of radius 14 cm and height 50 cm hold (π = 22/7)?
- Rain of 3 cm falls on a roof of area 100 m². How many cubic metres of water are collected?
- A pipe of cross-section 0.01 m² carries water at 2 m/s. How many litres per second flow?
- How long does a pipe giving 20 litres per second take to fill a 3,000-litre tank?
Answers: 1) 5 cm; 2) 5.5 cm; 3) 30.8 litres; 4) 3 m³; 5) 20 litres; 6) 150 seconds.
Why Is This Topic Important?
- Frequent Water-transfer questions are common in SSC papers.
- Concept They test conservation of volume.
- Real life They model tanks, pipes and rainfall.
- Link Rate problems connect with pipes and cisterns in Pipes and Cisterns – Filling and Emptying Problems.
What Comes Next?
The next topic is Length of the Diagonal of a Cube or Cuboid. It finds the diagonal of a cube or cuboid.
Key Terms and Formulas
- Capacity The volume a container can hold
- Displacement The volume of water pushed out by an immersed solid
- Level The height of water in a container
- Flow rate Volume passing a point per unit time
- Cross-section The area of the pipe opening
- Hectare 10,000 square metres
Related Topics
- Ratio of Volumes and Surface Areas When Linear Dimensions Are Scaled
- Length of the Diagonal of a Cube or Cuboid
- Volume and Surface Area of Cube and Cuboid
- Volume and Surface Area of Cylinder
Exam Corner
Points to Remember
- Volume of water is conserved when poured.
- Level = volume / base area.
- Immersed solid raises the level by volume / base area.
- Flow per second = cross-section × speed.
- 1 m³ = 1000 litres.
Do Not Confuse With
- Base area vs surface area The level uses the base area.
- Volume vs capacity Capacity is volume in litres.
- Depth vs rainfall volume Volume = area × depth.
- Radius vs diameter Pipe formulas use the radius.
Memory Hook
Pour, equate the volumes, divide by the base.
GS Relevance
Frequently Asked Questions
How do you find the water level after pouring?
Equate the volume of water before and after pouring, then divide that volume by the base area of the second container to get the new height. Water from a cylinder of radius 14 cm and height 21 cm poured into a 44 cm by 28 cm tank rises 10.5 cm.
What happens when a cone of water is emptied into a cylinder?
A cone has one third of the volume of a cylinder with the same base and height, so the water forms a cylinder one third as tall when the radii are equal. A cone of height 24 cm emptied into a cylinder of the same radius gives water of height 8 cm.
How much does the water level rise when a solid is dropped in?
The rise in water level equals the volume of the immersed solid divided by the base area of the container, provided the solid is fully submerged. A sphere of radius 3 cm dropped into a cylinder of radius 6 cm raises the level by 1 cm.
How do you calculate the flow of water through a pipe?
The volume flowing per second equals the cross-sectional area of the pipe multiplied by the speed of the water. For a pipe of radius 7 cm and speed 3 m/s, using pi equal to 22/7, the flow is 0.0462 cubic metres, or 46.2 litres, per second.
How do you convert cubic centimetres to litres?
One litre equals 1000 cubic centimetres, so divide a volume in cubic centimetres by 1000 to get litres. Similarly, one cubic metre equals 1000 litres, so a tank of 24 cubic metres holds 24,000 litres, and a cylinder of 30,800 cubic centimetres holds 30.8 litres.
PYQ Practice — Statement Analysis
1 A cone of water emptied into a cylinder of the same radius forms water one third as tall as the cone.
The cone's volume is one third of the cylinder's.
2 The rise in level on immersing a solid is its surface area divided by the base area.
It is its volume divided by the base area.
3 One cubic metre equals 1000 litres.
1 m³ = 1000 litres.
4 One hectare of land is 1000 square metres.
One hectare is 10,000 square metres.
Related Topics
Browse the full Quantitative Aptitude index