An Initiative by SAARTHI IAS
Maarg Manthan · Topic 19.7

Ratio of Volumes and Surface Areas When Linear Dimensions Are Scaled

Quantitative Aptitude › Mensuration – 3D · Topic 19.7

When all linear dimensions of a solid are multiplied by a factor k, its surface area is multiplied by k squared and its volume by k cubed. So the ratio of volumes of similar solids is the cube of the ratio of corresponding lengths and the ratio of their surface areas is the square of that ratio.

Share:
Ratio of Volumes and Surface Areas When Linear Dimensions Are Scaled - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

When all linear dimensions of a solid are multiplied by a factor k, its surface area is multiplied by k squared and its volume by k cubed. So the ratio of volumes of similar solids is the cube of the ratio of corresponding lengths and the ratio of their surface areas is the square of that ratio.

At a Glance

  • Lengths × k
  • Surface area × k²
  • Volume × k³
  • Ratio of volumes Cube of ratio of lengths
  • Radius up 10% Volume up 33.1%, area up 21%
  • Only one dimension scaled The cube rule does not apply

Where Does It Fit?

This topic extends the scaling rule of Ratio of Areas When Linear Dimensions Are Scaled from areas to solids. It uses the formulas of Volume and Surface Area of Cube and Cuboid to Volume and Surface Area of Sphere and Hemisphere, and a similar idea appears in Congruence and Similarity of Triangles (SSS, SAS, ASA, AA Criteria).

How Do Volume and Surface Area Change When Lengths Are Scaled?

In short: area goes with the square of the scale factor and volume goes with the cube.

Scale factor k Surface area Volume Example
2 × 4 × 8 Edge 3 to 6: volume 27 to 216
3 × 9 × 27 Radius 7 to 21: sphere volume × 27
1/2 × 1/4 × 1/8 Edge 10 to 5: volume 1000 to 125
1.1 × 1.21 × 1.331 Radius up 10 per cent: volume up 33.1 per cent
1.5 × 2.25 × 3.375 Edge 4 to 6: volume 64 to 216

The rule requires every length of the solid, including the height, to be multiplied by the same factor.

What If Only Some Dimensions Change?

In short: then use the formula and multiply the factors of the dimensions that appear.

  • Cylinder: V = πr²h, so radius doubled gives 4 times, height doubled gives 2 times, and both doubled gives 8 times.
  • Cone: radius doubled and height same: volume × 4; radius same and height doubled: volume × 2.
  • Cuboid: length × 2, breadth × 3, height same: volume × 6.
  • Sphere: only the radius appears, so the cube rule always applies.

How Are Ratios of Similar Solids Used?

In short: take the cube root of the volume ratio to get the ratio of lengths and the square of that for the area ratio.

  • Volumes 64 : 125: lengths in the ratio 4 : 5 and surface areas in the ratio 16 : 25.
  • Radii 2 : 3: surface areas 4 : 9 and volumes 8 : 27.
  • Model and original: a model made to a scale of 1 : 10 has 1/100 of the surface area and 1/1000 of the volume.
  • Paint and cost: paint depends on area, while material weight depends on volume.

Solved Examples

Example 1

Question: The radii of two spheres are in the ratio 2 : 3. Find the ratio of their surface areas and volumes.

  1. Surface areas = 2² : 3² = 4 : 9.
  2. Volumes = 2³ : 3³ = 8 : 27.

Answer: 4 : 9 and 8 : 27.

Example 2

Question: The edge of a cube is increased by 10 per cent. Find the percentage increase in volume and surface area.

  1. Volume factor = 1.1³ = 1.331.
  2. Area factor = 1.1² = 1.21.

Answer: Volume up 33.1 per cent, surface area up 21 per cent.

Example 3

Question: The volumes of two similar solids are in the ratio 64 : 125. Find the ratio of their surface areas.

  1. Ratio of lengths = the cube root of (64/125) = 4/5.
  2. Surface areas = 4² : 5².

Answer: 16 : 25.

Example 4

Question: The radius of a cylinder is doubled and its height halved. How does the volume change?

  1. New volume = π(2r)²(h/2) = 2πr²h.

Answer: The volume doubles.

Example 5

Question: A model of a statue is made to a scale of 1 : 10. If the model has surface area 2 m² and weight 5 kg, find the area and weight of the statue, assuming the same material.

  1. Area scales as 10² = 100, so the statue area = 200 m².
  2. Weight scales as 10³ = 1000, so the weight = 5000 kg.

Answer: 200 m² and 5000 kg.

Shortcuts and Tricks

  • Square the scale factor for area and cube it for volume.
  • Convert percentages to factors: 20 per cent more is 1.2, then 1.2³ = 1.728.
  • Take cube roots of 8, 27, 64, 125, 216 to get ratios quickly.
  • For a partly scaled solid, use the formula, not the cube rule.
  • Weight follows volume; paint follows surface area.

Common Mistakes

  • Using the square rule for volume.
  • Applying the cube rule when only one dimension changes.
  • Adding percentage changes without compounding.
  • Taking a square root where a cube root is required.
  • Forgetting to scale the height as well as the base dimensions.

Practice Questions

  1. If the edge of a cube doubles, by what factor does the volume increase?
  2. The radii of two spheres are in the ratio 1 : 2. What is the ratio of their volumes?
  3. The radius of a sphere increases by 20 per cent. By what percentage does the volume increase?
  4. The surface areas of two similar cubes are 16 and 49. What is the ratio of their volumes?
  5. A cone’s radius is tripled and its height unchanged. By what factor does the volume increase?
  6. A 1 : 5 scale model weighs 2 kg. What does the original weigh?

Answers: 1) 8; 2) 1 : 8; 3) 72.8 per cent; 4) 64 : 343; 5) 9; 6) 250 kg.

Why Is This Topic Important?

What Comes Next?

The next topic is Water Poured or Emptied from One Container into Another of a Different Shape. It looks at water transferred between containers of different shapes.

Key Terms and Formulas

  • Scale factor The number by which every length is multiplied
  • Similar solids Solids of the same shape with proportional lengths
  • Model A scaled copy of an object
  • Volume factor The cube of the scale factor
  • Area factor The square of the scale factor
  • Corresponding lengths Lengths in the same position in similar solids

Exam Corner

Points to Remember

  • Area × k², volume × k³.
  • Ratio of volumes = cube of ratio of lengths.
  • Ratio of areas = square of ratio of lengths.
  • Edge up 10 per cent gives volume up 33.1 per cent.
  • Use factors, not percentages added.

Do Not Confuse With

  • Area factor vs volume factor k² for area, k³ for volume.
  • One dimension vs all Only uniform scaling follows the cube rule.
  • Similar vs congruent Congruent solids are identical in size.
  • Percent vs factor 20 per cent increase means a factor of 1.2.

Memory Hook

Square for surface, cube for volume.

GS Relevance

Ratio of volumes and surface areas of similar solids when dimensions are scaled, for SSC CGL, CAT and CSAT mensuration.

Frequently Asked Questions

How does volume change when all dimensions are doubled?

When every linear dimension of a solid is doubled, its volume becomes eight times as large, because volume depends on the cube of the scale factor, while its surface area becomes four times as large. Tripling every length gives 27 times the volume and 9 times the area.

What is the ratio of volumes of two similar solids?

The ratio of the volumes of two similar solids is the cube of the ratio of their corresponding lengths. If two spheres have radii in the ratio 2 to 3, their surface areas are in the ratio 4 to 9 and their volumes in the ratio 8 to 27.

How much does volume increase when an edge increases by 10 per cent?

If the edge of a cube increases by 10 per cent, the volume becomes 1.1 cubed, which is 1.331 times the original, an increase of 33.1 per cent. The surface area becomes 1.21 times the original, an increase of 21 per cent.

How do you find the ratio of lengths from the ratio of volumes?

Take the cube root of the ratio of volumes to get the ratio of corresponding lengths, and square it to get the ratio of surface areas. For volumes in the ratio 64 to 125, the lengths are in the ratio 4 to 5 and the areas in the ratio 16 to 25.

Does the cube rule apply if only the radius of a cylinder changes?

No, the cube rule needs every linear dimension to be scaled by the same factor. If only the radius of a cylinder doubles, the volume becomes four times because volume is proportional to the square of the radius and to the first power of the height.

PYQ Practice — Statement Analysis

1 If every edge of a cube is doubled, its volume becomes eight times.
True

Volume scales with the cube of the edge.

2 The ratio of surface areas of two similar solids is the cube of the ratio of their lengths.
False

It is the square of the ratio.

3 If the radius of a sphere increases by 10 per cent, its volume increases by 33.1 per cent.
True

1.1³ = 1.331.

4 If only the radius of a cone is doubled, its volume doubles.
False

It becomes four times.

Share: