Pipes and Cisterns – Filling and Emptying Problems
Quantitative Aptitude › Time and Work, Pipes and Cisterns · Topic 9.5
In pipes and cisterns, an inlet pipe fills a tank and an outlet pipe empties it. An inlet that fills the tank in a hours adds 1/a of the tank each hour, and an outlet that empties it in b hours removes 1/b each hour.
5 min read · Quantitative Aptitude · Time and Work, Pipes and Cisterns
Quick Answer
In pipes and cisterns, an inlet pipe fills a tank and an outlet pipe empties it. An inlet that fills the tank in a hours adds 1/a of the tank each hour, and an outlet that empties it in b hours removes 1/b each hour.
At a Glance
- Inlet Rate = +1 / time to fill
- Outlet Rate = -1 / time to empty
- Net rate Sum of all rates
- Time to fill 1 / Net rate
- Fraction filled Rate × Time
- If net rate is zero or negative Tank never fills
Where Does It Fit?
Pipes and cisterns is time and work with a tank in place of a job. It follows Work Left/Completed When People Join or Leave Midway and leads into Pipes Working Together, Alternately or with One Acting as an Outlet and Pipe-Filling Problems with a Simultaneous Leak.
How Do Inlet and Outlet Pipes Work?
In short: treat the tank as one whole job. An inlet does positive work, and an outlet does negative work.
Pipe rates
- Inlet pipe filling in a hours: rate = +1/a of the tank per hour
- Outlet pipe emptying in b hours: rate = -1/b of the tank per hour
- Net rate = sum of all rates, and time to fill = 1 / net rate
If pipe A fills a tank in 8 hours and pipe B fills it in 12 hours, together their rate is 1/8 + 1/12 = 5/24, so the tank is filled in 24/5 = 4.8 hours.
How Do You Solve Problems With an Outlet?
| Pipes | Net rate | Time to fill |
|---|---|---|
| Inlet 10 h, outlet 15 h | 1/10 – 1/15 = 1/30 | 30 hours |
| Inlet 6 h, outlet 9 h | 1/6 – 1/9 = 1/18 | 18 hours |
| Outlet alone, 6 h | -1/6 | Empties a full tank in 6 hours |
When the outlet is faster than the inlet, the net rate is negative and the tank empties instead. The relationship to work rates is the same as in Combined Work by Multiple Persons or Groups.
What Other Forms Do Pipe Questions Take?
- Capacity in litres: a pipe fills 30 litres a minute, so a 600-litre tank takes 600/30 = 20 minutes, or the same pipe takes 20 minutes if it fills a 600-litre tank in 20 minutes.
- Fraction after time: a pipe filling a tank in 12 hours fills 4/12 = 1/3 of it in 4 hours.
- Time for a given fraction: time = fraction / rate.
- Leak: a leak is an outlet whose rate is subtracted, as in Pipe-Filling Problems with a Simultaneous Leak.
Solved Examples
Example 1
Question: Pipe A can fill a tank in 8 hours and pipe B in 12 hours. How long do they take together?
- Rate of A = 1/8 and of B = 1/12.
- Together = 1/8 + 1/12 = 5/24.
- Time = 24/5 = 4.8 hours.
Answer: 4.8 hours
Example 2
Question: An outlet pipe empties a full tank in 6 hours. How long to empty a full tank?
- Rate = 1/6 of the tank per hour.
- Time = 1 / (1/6) = 6 hours.
Answer: 6 hours
Example 3
Question: An inlet fills a tank in 10 hours and an outlet empties it in 15 hours. If both are open, how long to fill the empty tank?
- Net rate = 1/10 – 1/15 = 3/30 – 2/30 = 1/30.
- Time = 30 hours.
Answer: 30 hours
Example 4
Question: A pipe fills 30 litres per minute. How long does it take to fill a 600-litre tank?
- Time = capacity / rate = 600 / 30.
- 600 / 30 = 20.
Answer: 20 minutes
Example 5
Question: A pipe fills a tank in 12 hours. What fraction is filled in 4 hours?
- Rate = 1/12 per hour.
- Fraction = 4 × 1/12 = 1/3.
Answer: 1/3
Shortcuts and Tricks
- Add inlet rates and subtract outlet rates to get the net rate.
- Use the LCM of times as the tank capacity to avoid fractions.
- Check that the net rate is positive before finding the filling time.
- For a fraction of the tank, multiply the fraction by the full-tank time.
- Convert litres per minute and capacity to the same units.
Common Mistakes
- Adding the outlet rate instead of subtracting it.
- Adding times instead of rates.
- Forgetting that a negative net rate means the tank empties.
- Mixing minutes and hours.
- Taking the reciprocal of the wrong rate.
Practice Questions
- A fills a tank in 10 hours and B in 15 hours. How long together?
- An inlet fills a tank in 6 hours and an outlet empties it in 9 hours. How long to fill with both open?
- A pipe fills 24 litres per minute. How long does a 720-litre tank take?
- A pipe fills a tank in 12 hours. What fraction is filled in 3 hours?
- Two inlets fill a tank in 20 and 30 minutes. How long together?
Answers: 1) 6 hours; 2) 18 hours; 3) 30 minutes; 4) 1/4; 5) 12 minutes.
Why Is This Topic Important?
- Same logic Time and work ideas carry over directly.
- Exam use Pipes questions are a regular set.
- Negative rates Outlets teach the idea of subtracting rates.
- Link It prepares for Pipes Working Together, Alternately or with One Acting as an Outlet.
What Comes Next?
The next topic is Pipes Working Together, Alternately or with One Acting as an Outlet, where pipes work together, alternately or with an outlet.
Key Terms and Formulas
- Inlet A pipe that fills the tank
- Outlet A pipe that empties the tank
- Cistern A tank that stores water
- Net rate Sum of inlet and outlet rates
- Capacity Volume the tank holds
- Leak An unintended outlet
Related Topics
- Work Left/Completed When People Join or Leave Midway
- Pipes Working Together, Alternately or with One Acting as an Outlet
- Work and Efficiency Relationship (Inverse Proportion)
- Combined Work by Multiple Persons or Groups
Exam Corner
Points to Remember
- Inlet rate = +1/a and outlet rate = -1/b.
- Net rate = sum of all rates.
- Time = 1 / net rate.
- A negative net rate means the tank empties.
- Fraction filled = rate × time.
Do Not Confuse With
- Inlet vs outlet Inlets add; outlets subtract.
- Rate vs time Rate is the reciprocal of time.
- Fill time vs empty time They are different values for different pipes.
- Net vs single rate Use the net rate when pipes work together.
Memory Hook
Inlets add, outlets subtract, then flip the net rate.
GS Relevance
Frequently Asked Questions
What is the rate of an inlet and an outlet pipe?
An inlet pipe that fills a tank in a hours has a rate of one over a of the tank per hour, and an outlet pipe that empties it in b hours has a rate of minus one over b. Net rate is the sum of these rates, and the tank fills in the reciprocal of the net rate.
How do you find the time when two inlets work together?
When two inlets work together, their rates are added and the reciprocal gives the time. For pipes filling a tank in 8 hours and 12 hours, the rate is 1/8 plus 1/12, which is 5/24, so together they fill the tank in 24/5, or 4.8 hours.
What happens when an outlet is faster than the inlet?
When an outlet is faster than the inlet, the net rate is negative and the tank empties instead of filling. For an inlet filling in 10 hours and an outlet emptying in 8 hours, the net rate is negative, so a full tank is emptied and an empty tank never fills.
How do you find the fraction of a tank filled in a given time?
The fraction of a tank filled in a given time is the pipe's rate multiplied by the time. A pipe that fills a tank in 12 hours has a rate of 1/12 per hour, so in 4 hours it fills 4/12, which is one third of the tank.
How is pipes and cisterns related to time and work?
Pipes and cisterns is time and work with a tank in place of a job. The tank is the whole work, an inlet is a worker doing positive work, and an outlet is a worker doing negative work, so the same rate addition and reciprocal methods are used.
PYQ Practice — Statement Analysis
1 An outlet pipe contributes a negative rate to the net rate.
It removes water from the tank.
2 If an inlet fills a tank in 10 hours and an outlet empties it in 15 hours, both open fill it in 25 hours.
Net rate 1/10 - 1/15 = 1/30, so 30 hours.
3 A pipe filling a tank in 12 hours fills one third of it in 4 hours.
4/12 = 1/3.
4 Two inlets filling a tank in 8 and 12 hours fill it together in 4.8 hours.
1/8 + 1/12 = 5/24, so 24/5 hours.
Related Topics
Browse the full Quantitative Aptitude index