Volume and Surface Area of Cone and Frustum of a Cone
Quantitative Aptitude › Mensuration – 3D · Topic 19.3
A right circular cone with base radius r, height h and slant height l has volume one third pi r squared h, curved surface area pi r l and total surface area pi r (r + l), where l is the square root of (r squared + h squared). A frustum of a cone has volume (pi h/3)(R squared + R r + r squared).
6 min read · Quantitative Aptitude · Mensuration – 3D
Quick Answer
A right circular cone with base radius r, height h and slant height l has volume one third pi r squared h, curved surface area pi r l and total surface area pi r (r + l), where l is the square root of (r squared + h squared). A frustum of a cone has volume (pi h/3)(R squared + R r + r squared).
At a Glance
- Slant height l = √(r² + h²)
- Volume (1/3)πr²h
- Curved surface area πrl
- Total surface area πr(r + l)
- Frustum volume (πh/3)(R² + Rr + r²)
- Frustum curved area π(R + r)l
Where Does It Fit?
This topic follows Volume and Surface Area of Cylinder: a cone has the same base and height as a cylinder but one third of its volume. The sphere comes next in Volume and Surface Area of Sphere and Hemisphere, and melting of cones appears in Problems on Combination of Solids and Melting/Recasting of Solids.
What Are the Formulas for a Cone?
In short: the volume is one third of the cylinder on the same base and height, and the curved surface uses the slant height, not the height.
| Quantity | Formula | Example r = 7, h = 24 (π = 22/7) |
|---|---|---|
| Slant height | l = √(r² + h²) | √(49 + 576) = 25 |
| Volume | (1/3)πr²h | (1/3)(22/7)(49)(24) = 1232 |
| Curved surface area | πrl | (22/7)(7)(25) = 550 |
| Total surface area | πr(r + l) | (22/7)(7)(32) = 704 |
Pythagorean triples make the slant height easy: radius and height of 7 and 24 give 25, 6 and 8 give 10, 5 and 12 give 13, 12 and 16 give 20.
What Is a Frustum and How Is It Handled?
In short: a frustum is a cone with its top cut off by a plane parallel to the base, leaving two circular faces of radii R and r.
Frustum formulas
- Slant height l = √(h² + (R – r)²).
- Volume = (πh/3)(R² + Rr + r²).
- Curved surface area = π(R + r)l.
- Total surface area = π(R + r)l + πR² + πr².
- Example: R = 14, r = 7, h = 24 gives l = √(576 + 49) = 25, volume = 8π × 343 = 8624 and curved area = π × 21 × 25 = 1650 (π = 22/7).
- Similar cones: the cut-off cone is similar to the whole cone, so its dimensions are in the ratio r : R, as in Congruence and Similarity of Triangles (SSS, SAS, ASA, AA Criteria).
How Do You Solve Sector-to-Cone Problems?
In short: when a sector is rolled into a cone, the sector’s radius becomes the slant height and the sector’s arc becomes the circumference of the base.
- Base radius: r = l × θ/360, where θ is the sector angle.
- Example: a sector of radius 21 cm and angle 120° gives a cone with slant height 21 and base radius 21 × 120/360 = 7.
- Height: h = √(l² – r²) = √(441 – 49) = √392 = 14√2.
- Curved area: equal to the area of the sector, which is πrl = 462.
Solved Examples
Example 1
Question: Find the slant height, volume, curved surface area and total surface area of a cone with r = 7 cm and h = 24 cm. Use π = 22/7.
- l = √(49 + 576) = 25.
- Volume = (1/3)(22/7)(49)(24) = 1232.
- CSA = (22/7)(7)(25) = 550.
- TSA = 550 + 154 = 704.
Answer: l = 25 cm, V = 1232 cm³, CSA = 550 cm², TSA = 704 cm².
Example 2
Question: A frustum has R = 14 cm, r = 7 cm and h = 24 cm. Find its slant height, volume and curved surface area. Use π = 22/7.
- l = √(576 + 49) = 25.
- Volume = (22/7)(24/3)(196 + 98 + 49) = (22/7)(8)(343) = 8624.
- CSA = (22/7)(21)(25) = 1650.
Answer: l = 25 cm, V = 8624 cm³, CSA = 1650 cm².
Example 3
Question: A sector of radius 21 cm and angle 120° is rolled into a cone. Find the base radius and curved surface area. Use π = 22/7.
- Base radius = 21 × 120/360 = 7.
- CSA = (22/7)(7)(21) = 462.
Answer: r = 7 cm, CSA = 462 cm².
Example 4
Question: Two cones have equal base radii and heights in the ratio 1 : 3. Find the ratio of their volumes.
- Volume is proportional to height when the radius is equal.
Answer: 1 : 3.
Example 5
Question: The radius of a cone is doubled and its height is halved. Find the change in volume.
- New volume = (1/3)π(2r)²(h/2) = 2 × (1/3)πr²h.
Answer: The volume doubles.
Shortcuts and Tricks
- Cone volume = one third of the cylinder with the same base and height.
- Always compute the slant height first with a Pythagorean triple.
- Curved area of a cone equals the area of the sector from which it is made.
- For a frustum, use (R² + Rr + r²) in the volume.
- Sector angle θ and radius l give base radius lθ/360.
Common Mistakes
- Using the height instead of the slant height in the curved area.
- Forgetting the factor 1/3 in the volume.
- Using R² – r² instead of R² + Rr + r² for the frustum volume.
- Taking the arc length of the sector as the slant height.
- Adding the base area when only the curved area is asked.
Practice Questions
- Find the volume of a cone with r = 6 cm and h = 8 cm (π = 3.14).
- Find the slant height of a cone with r = 5 cm and h = 12 cm.
- Find the curved surface area of a cone with r = 7 cm and l = 25 cm (π = 22/7).
- The volume of a cone is 1232 cm³ and r = 7 cm. Find the height (π = 22/7).
- Find the total surface area of a cone with r = 3 cm and l = 5 cm (π = 3.14).
- A cone and a cylinder have the same base and height. What is the ratio of their volumes?
Answers: 1) 301.44 cm³; 2) 13 cm; 3) 550 cm²; 4) 24 cm; 5) 75.36 cm²; 6) 1 : 3.
Why Is This Topic Important?
- Frequent Cone problems appear in melting and tent questions.
- Concept Slant height is a key idea.
- Speed Triples save calculation time.
- Link Cones combine with hemispheres in Problems on Combination of Solids and Melting/Recasting of Solids.
What Comes Next?
The next topic is Volume and Surface Area of Sphere and Hemisphere. It treats the sphere and the hemisphere, which have no flat faces except the hemisphere’s base.
Key Terms and Formulas
- Slant height The distance along the surface from apex to base edge
- Apex The pointed top of the cone
- Frustum A cone with its top removed by a parallel cut
- Sector A part of a circle cut by two radii
- Right circular cone A cone whose apex lies directly above the centre of the base
- Pythagorean triple Three whole numbers a, b, c with a² + b² = c²
Related Topics
- Volume and Surface Area of Cylinder
- Volume and Surface Area of Sphere and Hemisphere
- Volume and Surface Area of Cube and Cuboid
- Volume and Surface Area of Prism and Pyramid
Exam Corner
Points to Remember
- l = √(r² + h²); V = (1/3)πr²h.
- CSA = πrl; TSA = πr(r + l).
- Frustum V = (πh/3)(R² + Rr + r²).
- Sector to cone: l = sector radius, 2πr = arc length.
- Cone volume is one third of the cylinder.
Do Not Confuse With
- Height vs slant height Height is perpendicular; slant height is along the surface.
- Cone vs frustum A frustum has two circular faces.
- Arc vs radius The sector’s radius is the cone’s slant height.
- CSA vs TSA TSA adds the base area πr².
Memory Hook
One third of the cylinder, and the side uses the slant.
GS Relevance
Frequently Asked Questions
What is the formula for the volume of a cone?
The volume of a cone is one third times pi times the square of the base radius times the height. For a cone with radius 7 cm and height 24 cm, using pi equal to 22/7, the volume is 1232 cubic centimetres, one third of the cylinder on the same base.
How do you find the slant height of a cone?
The slant height of a cone is the square root of the sum of the squares of its radius and its height. For a radius of 7 cm and a height of 24 cm, the sum is 625, so the slant height is 25 cm, which also makes the curved area easy.
What is the curved surface area of a cone?
The curved surface area of a cone is pi times the radius times the slant height. For a radius of 7 cm and a slant height of 25 cm, using pi equal to 22/7, the curved area is 550 square centimetres, and the total area is 704.
What is the volume of a frustum of a cone?
The volume of a frustum is pi times h divided by 3 times (R squared plus Rr plus r squared). For R equal to 14 cm, r equal to 7 cm and h equal to 24 cm, using pi equal to 22/7, the volume is 8624 cubic centimetres.
What happens when a sector is rolled into a cone?
When a sector is rolled into a cone, its radius becomes the slant height and its arc length becomes the base circumference. A sector of radius 21 cm and angle 120 degrees gives a cone with base radius 7 cm, and the curved surface area equals the sector area, 462 square centimetres.
PYQ Practice — Statement Analysis
1 The volume of a cone is one third of the volume of a cylinder with the same base and height.
V = (1/3)πr²h.
2 The curved surface area of a cone is πrh.
It is πrl, with l the slant height.
3 When a sector is rolled into a cone, its radius becomes the cone's slant height.
The arc becomes the base circumference.
4 The slant height of a cone with r = 5 cm and h = 12 cm is 13 cm.
√(25 + 144) = 13.
Related Topics
Browse the full Quantitative Aptitude index