An Initiative by SAARTHI IAS
Maarg Manthan · Topic 19.2

Volume and Surface Area of Cylinder

Quantitative Aptitude › Mensuration – 3D · Topic 19.2

A right circular cylinder of radius r and height h has volume pi r squared h, curved surface area 2 pi r h and total surface area 2 pi r (r + h). For a hollow cylinder with outer radius R and inner radius r, the material volume is pi (R squared minus r squared) h.

Share:
Volume and Surface Area of Cylinder - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

A right circular cylinder of radius r and height h has volume pi r squared h, curved surface area 2 pi r h and total surface area 2 pi r (r + h). For a hollow cylinder with outer radius R and inner radius r, the material volume is pi (R squared minus r squared) h.

At a Glance

  • Volume πr²h
  • Curved surface area 2πrh
  • Total surface area 2πr(r + h)
  • Hollow cylinder volume π(R² – r²)h
  • Radius doubled Volume × 4
  • Pi used 22/7 for radius multiples of 7

Where Does It Fit?

This topic follows Volume and Surface Area of Cube and Cuboid and uses the circle formulas of Area and Circumference of Circle, Sector and Segment. The cone in Volume and Surface Area of Cone and Frustum of a Cone has the same base and height but one third of the volume.

What Are the Formulas for a Cylinder?

In short: the cylinder is a circle of area πr² stacked to a height h, and its curved surface unrolls into a rectangle.

Quantity Formula Example r = 7, h = 10 (π = 22/7)
Volume πr²h 22/7 × 49 × 10 = 1540
Curved surface area 2πrh 2 × 22/7 × 7 × 10 = 440
Total surface area 2πr(r + h) 2 × 22/7 × 7 × 17 = 748
Area of one base πr² 154

The curved surface is a rectangle of width 2πr (the circumference) and height h, which is why its area is 2πrh.

How Do You Solve Hollow-Cylinder and Rolled-Sheet Problems?

In short: treat a pipe as the difference of two cylinders, and a rolled sheet as a cylinder whose circumference is one side of the sheet.

  • Hollow cylinder: a pipe of outer radius R, inner radius r and length h has material volume π(R² – r²)h and total surface area 2π(R + r)h + 2π(R² – r²).
  • Rolling a rectangle: a 44 cm by 20 cm sheet rolled so that 44 cm forms the circumference has 2πr = 44, so r = 7 and h = 20, giving volume 3080 cm³. Rolled the other way, 2πr = 20 gives r = 35/11 and h = 44, so the volume is 1400 cm³.
  • Which way gives more volume: the volume is larger when the longer side forms the circumference, since volume depends on r².
  • Water and liquid: capacity in litres = volume in cm³ / 1000.

How Does Changing the Radius or Height Affect the Cylinder?

In short: volume depends on the square of the radius but only on the first power of the height.

Solved Examples

Example 1

Question: Find the volume, curved surface area and total surface area of a cylinder of radius 7 cm and height 10 cm. Use π = 22/7.

  1. Volume = (22/7)(49)(10) = 1540.
  2. Curved area = 2 × (22/7) × 7 × 10 = 440.
  3. Total = 440 + 2 × 154 = 748.

Answer: 1540 cm³, 440 cm², 748 cm².

Example 2

Question: A pipe has outer radius 8 cm, inner radius 7 cm and length 14 cm. Find the volume of the material. Use π = 22/7.

  1. Volume = π(64 – 49)(14).
  2. (22/7) × 15 × 14 = 660.

Answer: 660 cm³.

Example 3

Question: A rectangular sheet 44 cm by 20 cm is rolled into a cylinder with 44 cm as the circumference. Find the volume. Use π = 22/7.

  1. 2πr = 44 gives r = 7.
  2. Height = 20.
  3. Volume = (22/7)(49)(20).

Answer: 3080 cm³.

Example 4

Question: The same sheet is rolled the other way, with 20 cm as the circumference. Find the volume.

  1. 2πr = 20 gives r = 35/11.
  2. Height = 44.
  3. Volume = (22/7)(1225/121)(44) = 1400.

Answer: 1400 cm³.

Example 5

Question: The radius of a cylinder is doubled and its height is halved. How does the volume change?

  1. New volume = π(2r)²(h/2) = 2πr²h.

Answer: The volume doubles.

Shortcuts and Tricks

  • Curved surface area equals circumference times height.
  • Total surface area = curved area + 2 × base area.
  • Use π = 22/7 whenever r is 7, 14, 21 or 3.5.
  • Rolled sheet: the side that becomes the circumference gives the radius.
  • For a hollow cylinder, subtract inner from outer before multiplying by h.

Common Mistakes

  • Using the diameter in place of the radius.
  • Adding both bases to the curved area when asked for the curved area only.
  • Forgetting that an open cylinder has only one base.
  • Using height for the circumference in rolled-sheet problems.
  • Not converting cm³ into litres by dividing by 1000.

Practice Questions

  1. Find the volume of a cylinder of radius 14 cm and height 5 cm (π = 22/7).
  2. Find the curved surface area of a cylinder with radius 7 cm and height 12 cm (π = 22/7).
  3. A tank has radius 7 m and height 10 m. How many litres can it hold (π = 22/7)?
  4. A cylinder has volume 154 cm³ and height 1 cm. Find the radius (π = 22/7).
  5. A pipe has R = 5 cm, r = 4 cm, h = 7 cm. Find the material volume (π = 22/7).
  6. The radius of a cylinder is tripled. How many times does the volume increase?

Answers: 1) 3080 cm³; 2) 528 cm²; 3) 1,540,000 litres; 4) 7 cm; 5) 198 cm³; 6) 9 times.

Why Is This Topic Important?

  • Standard Cylinders appear in tank, pipe and roller problems.
  • Concept The curved surface as a rectangle is a key idea.
  • Speed The formulas are short.
  • Link Cones and spheres in Volume and Surface Area of Cone and Frustum of a Cone and Volume and Surface Area of Sphere and Hemisphere build on the same circle.

What Comes Next?

The next topic is Volume and Surface Area of Cone and Frustum of a Cone. It treats the cone and its frustum, which taper from a circular base.

Key Terms and Formulas

  • Right circular cylinder A cylinder whose axis is perpendicular to the circular bases
  • Curved surface The side surface of the cylinder
  • Hollow cylinder A pipe with an inner and outer radius
  • Circumference 2πr, the length around the circle
  • Capacity Volume expressed in litres
  • Roller A cylinder that rolls along a surface

Exam Corner

Points to Remember

  • V = πr²h; CSA = 2πrh; TSA = 2πr(r + h).
  • Hollow cylinder volume = π(R² – r²)h.
  • Radius doubled gives volume × 4.
  • 1000 cm³ = 1 litre.
  • A rolled sheet’s side becomes the circumference.

Do Not Confuse With

  • CSA vs TSA CSA excludes the two circular bases.
  • Radius vs diameter All formulas use the radius.
  • Hollow vs solid A hollow cylinder subtracts the inner volume.
  • Circumference vs area Circumference is 2πr; area is πr².

Memory Hook

Circle times height gives volume; circumference times height gives the side.

GS Relevance

Volume, curved and total surface area of a cylinder, hollow cylinders and rolled sheets, for SSC CGL, CAT and CSAT mensuration.

Frequently Asked Questions

What is the formula for the volume of a cylinder?

The volume of a cylinder is pi times the square of the radius times the height. For a cylinder of radius 7 cm and height 10 cm, using pi equal to 22/7, the volume is 22/7 times 49 times 10, which equals 1540 cubic centimetres.

What is the curved surface area of a cylinder?

The curved surface area of a cylinder is 2 times pi times radius times height, which is the circumference of the base multiplied by the height. For a radius of 7 cm and height of 10 cm, using pi equal to 22/7, it is 440 square centimetres.

What is the total surface area of a cylinder?

The total surface area of a closed cylinder is 2 pi r times (r plus h), which equals the curved surface area plus twice the area of one base. For a cylinder with radius 7 cm and height 10 cm, using pi equal to 22/7, it equals 748 square centimetres.

How do you find the volume of a hollow cylinder?

The material of a hollow cylinder has volume pi times (R squared minus r squared) times h, where R is the outer radius and r the inner radius. For R equal to 8 cm, r equal to 7 cm and length 14 cm, using pi equal to 22/7, the volume is 660 cubic centimetres.

What happens to the volume of a cylinder if the radius is doubled?

If the radius of a cylinder is doubled while the height stays the same, the volume becomes four times as large, because volume depends on the square of the radius. If the height is also halved, the volume becomes twice the original.

PYQ Practice — Statement Analysis

1 The curved surface area of a cylinder is 2πrh.
True

It is the circumference times the height.

2 If the radius of a cylinder doubles and its height stays the same, the volume doubles.
False

It becomes four times as large.

3 The total surface area of a closed cylinder is 2πr(r + h).
True

Curved area plus two bases.

4 A sheet 44 cm by 20 cm rolled with 44 cm as circumference has volume 3080 cm³ (π = 22/7).
True

The radius is 7 cm and the height 20 cm.

Share: