An Initiative by SAARTHI IAS
Maarg Manthan · Topic 19.6

Problems on Combination of Solids and Melting/Recasting of Solids

Quantitative Aptitude › Mensuration – 3D · Topic 19.6

When a solid is melted and recast, its volume stays the same, so the total volume of the new pieces equals the volume of the old solid. For a combined solid, the volume is the sum of the volumes of its parts, while the surface area counts only the exposed faces.

Share:
Problems on Combination of Solids and Melting/Recasting of Solids - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

When a solid is melted and recast, its volume stays the same, so the total volume of the new pieces equals the volume of the old solid. For a combined solid, the volume is the sum of the volumes of its parts, while the surface area counts only the exposed faces.

At a Glance

  • Key rule Volume before = volume after
  • Number of small solids Big volume / small volume
  • Combined solid volume Sum of part volumes
  • Combined solid area Only exposed surfaces
  • Toy: cone + hemisphere Hemisphere on the cone’s base
  • Wastage Subtract before dividing

Where Does It Fit?

This topic applies the individual formulas of Volume and Surface Area of Cube and Cuboid to Volume and Surface Area of Prism and Pyramid to solids that are combined or reshaped. It leads to Ratio of Volumes and Surface Areas When Linear Dimensions Are Scaled on scaling and Water Poured or Emptied from One Container into Another of a Different Shape on pouring water between vessels.

How Do Melting and Recasting Problems Work?

In short: melting changes the shape of a solid but not its volume, so equate the volume of the old solid to the combined volume of the new ones.

  1. Write the volume of the melted solid.
  2. Write the volume of one new solid in terms of the unknown.
  3. Equate: old volume = number × new volume, or old volume = new volume if one solid is formed.
  4. Cancel common factors such as 4/3 and π before substituting numbers.
Melted solid Recast into Result
Sphere radius 21 Spheres of radius 3 (21/3)³ = 343 spheres
Sphere radius 14 Cylinder of radius 7 Height = 224/3 = 74.67
Cubes of edge 3, 4, 5 One cube Edge = cube root of 216 = 6
Cylinder radius 6, height 12 Cones of radius 6, height 12 3 cones

How Do You Find the Volume and Surface Area of a Combined Solid?

In short: add the volumes of the parts, but for surface area drop the faces that are joined together and hidden.

  • Toy of a cone and a hemisphere: a cone of r = 7 and h = 24 with a hemisphere of radius 7 on its base has volume 1232 + 2156/3 = 5852/3 ≈ 1950.67, and exposed area 550 + 308 = 858 (π = 22/7).
  • Capsule: a cylinder with a hemisphere on each end has volume πr²h + (4/3)πr³ and area 2πrh + 4πr².
  • Tent: a cylinder topped by a cone has curved area 2πrh + πrl and no base overlap.
  • Hidden faces: the circle where the hemisphere meets the cone is not part of the surface area.

What Are Common Pitfalls in These Problems?

In short: check units, wastage and the number of whole solids that can be formed.

  • Whole number: the number of small solids must be a whole number; if volume does not divide exactly, take the largest whole number.
  • Wastage: subtract any wasted or lost metal before dividing.
  • Hollow solids: a hollow sphere or pipe is a difference of two solids, as in Volume and Surface Area of Sphere and Hemisphere and Volume and Surface Area of Cylinder.
  • Units: convert to the same unit before equating volumes.

Solved Examples

Example 1

Question: A metal sphere of radius 21 cm is melted and recast into small spheres of radius 3 cm. How many small spheres are formed?

  1. Number = (4/3)π(21)³ / ((4/3)π(3)³).
  2. = (21/3)³ = 7³.

Answer: 343 spheres.

Example 2

Question: A sphere of radius 14 cm is melted and recast into a cylinder of radius 7 cm. Find the height of the cylinder. Use π = 22/7.

  1. (4/3)π(2744) = π(49)h.
  2. h = (4/3)(2744)/49 = (4/3)(56).

Answer: h = 224/3 cm, about 74.67 cm.

Example 3

Question: Three metal cubes of edges 3 cm, 4 cm and 5 cm are melted into one cube. Find its edge.

  1. Total volume = 27 + 64 + 125 = 216.
  2. Edge = cube root of 216.

Answer: 6 cm.

Example 4

Question: A toy is a cone of radius 7 cm and height 24 cm with a hemisphere of radius 7 cm on its base. Find the volume and the exposed surface area. Use π = 22/7.

  1. Cone volume = 1232 and hemisphere volume = 2156/3.
  2. Volume = 1232 + 718.67 = 1950.67.
  3. Cone curved area = 550 and hemisphere curved area = 308.
  4. Exposed area = 858.

Answer: Volume 1950.67 cm³ and surface area 858 cm².

Example 5

Question: A cylinder of radius 6 cm and height 12 cm is melted into cones of the same radius and height. How many cones are formed?

  1. Cone volume = (1/3) of the cylinder.
  2. Number = 1 / (1/3).

Answer: 3 cones.

Shortcuts and Tricks

  • Cancel π and common fractions first, then substitute numbers.
  • Equal base and height: a cylinder equals 3 cones.
  • For many small spheres, the number is the cube of the radius ratio.
  • For combined solids, draw each part and list which faces are hidden.
  • Convert all lengths to one unit before equating volumes.

Common Mistakes

  • Adding surface areas of joined faces that are hidden.
  • Forgetting to cancel 4/3 and π, which leads to arithmetic errors.
  • Using the diameter in place of the radius in the sphere formula.
  • Not rounding the number of solids down to a whole number.
  • Ignoring wastage stated in the problem.

Practice Questions

  1. A sphere of radius 12 cm is melted into spheres of radius 3 cm. How many are formed?
  2. Two cubes of edge 6 cm and 8 cm are melted into one cube. Find the edge of the new cube.
  3. A cylinder of radius 7 cm and height 18 cm is melted into one sphere. Find the radius of the sphere (π = 22/7).
  4. A cone and a cylinder have equal radius and height. If the cone is melted, how many cones make one cylinder?
  5. A solid sphere of radius 3 cm is melted into a cone of radius 3 cm. Find the height.
  6. Metal from a cube of edge 12 cm is recast into a cuboid 24 cm by 6 cm by h. Find h.

Answers: 1) 64; 2) cube root of 728 cm, about 9 cm; 3) cube root of 661.5, about 8.71 cm; 4) 3; 5) 12 cm; 6) 12 cm.

Why Is This Topic Important?

  • Frequent Melting and recasting questions appear in every mensuration paper.
  • Concept They rely on conservation of volume.
  • Speed Cancelling factors makes them short.
  • Link The idea of volume transfer continues in Water Poured or Emptied from One Container into Another of a Different Shape.

What Comes Next?

The next topic is Ratio of Volumes and Surface Areas When Linear Dimensions Are Scaled. It compares volumes and surface areas of solids whose dimensions are scaled.

Key Terms and Formulas

  • Recasting Reshaping a melted solid into another form
  • Conservation of volume The total volume does not change
  • Combined solid A solid made of two or more simple solids
  • Exposed surface The part of the surface visible from outside
  • Wastage Material lost in the process
  • Capsule A cylinder with hemispheres at both ends
  • Volume and Surface Area of Prism and Pyramid
  • Ratio of Volumes and Surface Areas When Linear Dimensions Are Scaled
  • Volume and Surface Area of Cube and Cuboid
  • Volume and Surface Area of Cylinder

Exam Corner

Points to Remember

  • Volume is conserved when melting.
  • Number of small spheres = (R/r)³.
  • Cylinder = 3 cones of equal base and height.
  • Joined faces are not part of the surface area.
  • Convert to a common unit first.

Do Not Confuse With

  • Volume vs surface area Melting conserves volume, not surface area.
  • Radius ratio vs volume ratio The volume ratio is the cube of the radius ratio.
  • Total vs exposed area The joined faces are excluded.
  • Cone vs cylinder Cone = one third of the cylinder.

Memory Hook

Melt and recast: volume stays, surface changes.

GS Relevance

Combination of solids and melting-recasting problems using conservation of volume, for SSC CGL, CAT and CSAT mensuration.

Frequently Asked Questions

What is conserved when a solid is melted and recast?

The volume is conserved when a solid is melted and recast, so the total volume of the new pieces equals the volume of the original solid. The surface area changes, and for equal-volume solids the sphere has the smallest surface area.

How many small spheres can be made from a large sphere?

The number of small spheres equals the cube of the ratio of the large radius to the small radius, since volume depends on the cube of the radius. A sphere of radius 21 cm melted into spheres of radius 3 cm gives 7 cubed, or 343, spheres.

How do you find the volume of a combined solid?

The volume of a combined solid is the sum of the volumes of its parts. A toy made of a cone of radius 7 cm and height 24 cm with a hemisphere on its base has a volume of about 1950.67 cubic centimetres, using pi equal to 22/7.

How do you find the surface area of a combined solid?

Add the surface areas of the parts, but leave out the faces that are joined and hidden. For a cone with a hemisphere on its base, the exposed area is the curved area of the cone, 550, plus that of the hemisphere, 308, giving 858 square centimetres.

How many cones can be made from a cylinder?

A cylinder of the same radius and height as a cone has three times the cone's volume, so three such cones can be made by melting one cylinder. If the dimensions differ, divide the cylinder's volume by the volume of one cone and take the whole number.

PYQ Practice — Statement Analysis

1 When a solid is melted and recast, its volume remains unchanged.
True

Only the shape changes.

2 A cylinder of radius 6 cm and height 12 cm can be melted into 3 cones of the same radius and height.
True

A cone has one third of the volume.

3 Melting and recasting conserves surface area.
False

It conserves volume only.

4 When a cone and a hemisphere are joined at their bases, the circle where they meet is part of the surface area.
False

That circle is hidden inside the solid.

Share: