An Initiative by SAARTHI IAS
Maarg Manthan · Topic 18.10

Relationship Between Change in Perimeter and Change in Area

Quantitative Aptitude › Mensuration – 2D · Topic 18.10

For a fixed perimeter, the square has the greatest area among rectangles and the circle has the greatest area among all plane figures. For a fixed area, the square has the least perimeter among rectangles. A change in the sides changes the perimeter in proportion but the area by a different amount.

Share:
Relationship Between Change in Perimeter and Change in Area - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

For a fixed perimeter, the square has the greatest area among rectangles and the circle has the greatest area among all plane figures. For a fixed area, the square has the least perimeter among rectangles. A change in the sides changes the perimeter in proportion but the area by a different amount.

At a Glance

  • Fixed perimeter, rectangle Square has the greatest area
  • Fixed perimeter, any figure Circle has the greatest area
  • Fixed area, rectangle Square has the least perimeter
  • Side up x% Perimeter up x%, area up 2x + x²/100 %
  • Wire bent into a shape Perimeter equals the wire length
  • Perimeter doubled Area of a similar figure × 4

Where Does It Fit?

This is the last topic of the 2D mensuration macro. It combines the formulas of Area and Perimeter of Square, Rectangle and Parallelogram and Area and Circumference of Circle, Sector and Segment with the scaling rule of Ratio of Areas When Linear Dimensions Are Scaled. The next macro, Volume and Surface Area of Cube and Cuboid, moves to solids.

What Happens to Area When the Perimeter Is Fixed?

In short: with the same perimeter, the more equal the sides, the larger the area, and a circle beats every other shape.

Shape made from a wire of length 88 cm Dimensions Area (π = 22/7)
Rectangle 30 cm by 14 cm 420 cm²
Rectangle 26 cm by 18 cm 468 cm²
Square 22 cm by 22 cm 484 cm²
Circle radius 14 cm 616 cm²

Among rectangles of the same perimeter, the area is greatest when the length equals the breadth. The rule is proved from the fact that for two numbers with a fixed sum, the product is largest when the numbers are equal, as in Relationship Between AM, GM and HM (AM ≥ GM ≥ HM).

What Happens to Perimeter When the Area Is Fixed?

In short: for a fixed area, the square has the smallest perimeter among rectangles.

  • Area 64 cm²: a square of side 8 has perimeter 32, a 4 by 16 rectangle has perimeter 40, and a 2 by 32 rectangle has perimeter 68.
  • Thin figures: making a rectangle thinner while keeping the area the same increases the perimeter without limit.
  • Circle: for a fixed area the circle has the smallest perimeter of any plane figure.
  • Use: a farmer who wants to enclose a fixed field with the least fence should use a square, or a circle if the shape is free.

How Do Percentage Changes in Sides Affect Perimeter and Area?

In short: perimeter changes by the same percentage as the sides, while area changes by more.

Change relationships

  • Square side up x per cent: perimeter up x per cent, area up (2x + x²/100) per cent.
  • Rectangle length up a per cent and breadth up b per cent: the area changes by (a + b + ab/100) per cent.
  • If length up by p per cent and breadth down by p per cent, the area falls by p²/100 per cent.
  • Length +10%, breadth -10%: area factor 1.1 × 0.9 = 0.99, a fall of 1 per cent.
  • Square side +10%: perimeter up 10 per cent and area up 21 per cent.
  • Wire problems: the wire length is the perimeter, so bending it into different shapes keeps the perimeter constant while the area varies.

Solved Examples

Example 1

Question: A wire of length 88 cm is bent into a circle, a square and a rectangle 30 cm by 14 cm. Find the area of each. Use π = 22/7.

  1. Circle: 2πr = 88 gives r = 14, area = (22/7)(196) = 616.
  2. Square: side = 88/4 = 22, area = 484.
  3. Rectangle: 30 × 14 = 420.

Answer: 616 cm², 484 cm² and 420 cm²; the circle has the greatest area.

Example 2

Question: The length of a rectangle is increased by 10 per cent and its breadth decreased by 10 per cent. Find the change in area.

  1. Factor = 1.1 × 0.9 = 0.99.

Answer: A 1 per cent decrease.

Example 3

Question: A rectangular field has area 64 m². Compare the fencing needed if it is a square and if it is 4 m by 16 m.

  1. Square: side 8, perimeter = 32 m.
  2. Rectangle 4 by 16: perimeter = 2(4 + 16) = 40 m.

Answer: The square needs 32 m, the rectangle needs 40 m.

Example 4

Question: The perimeter of a square is increased by 25 per cent. Find the percentage increase in its area.

  1. Side factor = 1.25.
  2. Area factor = 1.5625.

Answer: 56.25 per cent increase.

Example 5

Question: A rectangle has a perimeter of 40 cm. Find the maximum possible area.

  1. Length + breadth = 20.
  2. The product is greatest when both are 10.
  3. Area = 10 × 10.

Answer: 100 cm², for a square of side 10 cm.

Shortcuts and Tricks

  • For a fixed perimeter, split it into four equal sides to maximise the rectangle’s area.
  • A wire of length L bent into a circle has area L²/(4π), which is larger than the square’s L²/16.
  • If one dimension rises by p per cent and the other falls by p per cent, the area falls by p²/100 per cent.
  • Use factors, not percentages, to track changes.
  • For a fixed area, check the square first to get the minimum fencing.

Common Mistakes

  • Assuming the shape with the longer sides has the larger area when the perimeter is fixed.
  • Equating a percentage change in perimeter to the same change in area.
  • Forgetting that the wire length equals the perimeter, not the area.
  • Using the diameter in the circle area formula.
  • Adding the percentage changes of length and breadth without the cross term.

Practice Questions

  1. A rectangle has a perimeter of 60 cm. What is its largest possible area?
  2. A wire of 44 cm is bent into a square. What is the area?
  3. A wire of 44 cm is bent into a circle. What is the area (π = 22/7)?
  4. A rectangle has area 100 cm². What is the least possible perimeter?
  5. Length of a rectangle +20 per cent and breadth -20 per cent. Change in area?
  6. The perimeter of a square is reduced by 20 per cent. What is the percentage reduction in its area?

Answers: 1) 225 cm²; 2) 121 cm²; 3) 154 cm²; 4) 40 cm; 5) 4 per cent decrease; 6) 36 per cent.

Why Is This Topic Important?

What Comes Next?

The next macro is Mensuration – 3D, starting with Volume and Surface Area of Cube and Cuboid, where perimeter and area give way to volume and surface area.

Key Terms and Formulas

  • Perimeter The total length of the boundary
  • Area The surface enclosed by the boundary
  • Isoperimetric Having the same perimeter
  • Wire bending Reshaping a wire of fixed length into a figure
  • Optimise Choose dimensions to make a quantity as large or small as possible
  • Cross term The product term in a combined percentage change

Exam Corner

Points to Remember

  • Fixed perimeter: circle > square > other rectangles.
  • Fixed area: square has the least perimeter among rectangles.
  • Square side up x per cent: perimeter up x per cent, area up 2x + x²/100 per cent.
  • Equal and opposite changes in length and breadth reduce the area by p²/100 per cent.
  • Wire length equals the perimeter.

Do Not Confuse With

  • Fixed perimeter vs fixed area The first maximises area; the second minimises perimeter.
  • Perimeter change vs area change They differ unless the scale factor is 1.
  • Wire length vs area The wire gives the perimeter only.
  • Square vs circle The circle has the greatest area for the same perimeter.

Memory Hook

Same boundary: rounder is bigger. Same area: rounder is shorter.

GS Relevance

Relationship between perimeter and area, maximum area for a fixed perimeter and wire-bending problems, for SSC CGL, CAT and CSAT.

Frequently Asked Questions

Which rectangle has the greatest area for a fixed perimeter?

Among all rectangles with the same perimeter, the square has the greatest area. For a perimeter of 40 cm, the length plus breadth is 20, and the product is largest when both equal 10, which gives a maximum area of 100 square centimetres.

Which plane figure has the greatest area for a fixed perimeter?

Among all plane figures of the same perimeter, the circle has the greatest area. A wire of length 88 cm bent into a circle encloses 616 square centimetres with pi equal to 22/7, more than the 484 square centimetres enclosed by a square.

Which rectangle has the least perimeter for a fixed area?

For a fixed area, the square has the least perimeter among rectangles. A rectangle of area 64 square metres has perimeter 32 metres if it is an 8 by 8 square, but 40 metres if it is 4 by 16, so the square needs the least fencing.

How does area change when length rises and breadth falls by equal percentages?

If the length rises by p per cent and the breadth falls by p per cent, the area falls by p squared over 100 per cent. For a 10 per cent rise and 10 per cent fall, the area factor is 1.1 times 0.9, which is 0.99, a 1 per cent decrease.

What is the area when a wire is bent into a square?

A wire of length L bent into a square has side L divided by 4 and area L squared divided by 16. A wire of length 44 cm gives a square of side 11 cm and area 121 square centimetres, whereas bent into a circle it encloses 154 square centimetres.

PYQ Practice — Statement Analysis

1 For a fixed perimeter, a square has a greater area than any other rectangle.
True

The product is largest when the two sides are equal.

2 For a fixed perimeter, a circle has a smaller area than a square.
False

The circle has the greatest area of any plane figure.

3 If the length rises by 10 per cent and the breadth falls by 10 per cent, the area is unchanged.
False

The factor is 0.99, so the area falls by 1 per cent.

4 A wire of length 44 cm bent into a circle encloses 154 cm² (π = 22/7).
True

The radius is 7 cm.

Share: