An Initiative by SAARTHI IAS
Maarg Manthan · Topic 18.3

Area and Perimeter of Trapezium and Rhombus

Quantitative Aptitude › Mensuration – 2D · Topic 18.3

The area of a trapezium is half of the sum of its parallel sides multiplied by the distance between them, and the area of a rhombus is half the product of its diagonals. A rhombus of side a has perimeter 4a, and a trapezium's perimeter is the sum of its four sides.

Share:
Area and Perimeter of Trapezium and Rhombus - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

The area of a trapezium is half of the sum of its parallel sides multiplied by the distance between them, and the area of a rhombus is half the product of its diagonals. A rhombus of side a has perimeter 4a, and a trapezium’s perimeter is the sum of its four sides.

At a Glance

  • Trapezium area (1/2)(a + b) h
  • Median of trapezium (a + b)/2
  • Rhombus area (1/2) d1 d2
  • Rhombus perimeter 4 × side
  • Rhombus side √((d1/2)² + (d2/2)²)
  • Rhombus area also base × height

Where Does It Fit?

This topic uses the properties of Properties of Square, Rectangle, Parallelogram, Rhombus and Trapezium, and follows Area and Perimeter of Square, Rectangle and Parallelogram. It prepares the combined shapes of Area of Combined/Shaded Regions Involving Multiple 2D Shapes.

How Do You Find the Area of a Trapezium?

In short: a trapezium has area equal to its median multiplied by its height, which is half the sum of the parallel sides times the height.

Trapezium

  • Area = (1/2) × (a + b) × h, where a and b are the parallel sides and h is the distance between them.
  • Perimeter = a + b + c + d for the four sides.
  • For an isosceles trapezium, h = √(c² – ((a – b)/2)²), where c is the leg.
a b h Area
20 10 8 120
26 10 6 108
15 9 5 60

How Do You Find the Area and Side of a Rhombus?

In short: a rhombus is a parallelogram with four equal sides, so its area is half the product of the diagonals, and each side is the hypotenuse of a right triangle with half the diagonals as legs.

Rhombus

  • Area = (1/2) × d1 × d2.
  • Side = √((d1/2)² + (d2/2)²).
  • Perimeter = 4 × side.
  • Area = side × height.
d1 d2 Side Perimeter Area
18 24 15 60 216
12 16 10 40 96
10 24 13 52 120

How Do You Find the Height of a Trapezium or the Side of a Rhombus?

In short: most hard questions give the sides and diagonals, so the first job is to draw a right triangle and use Pythagoras.

  • Isosceles trapezium: drop perpendiculars from the shorter parallel side. The extra length of the longer side divides equally on both ends. With parallel sides 20 and 10 and equal legs of 13, each end takes (20 – 10)/2 = 5, the height is √(169 – 25) = 12, and the area is (1/2)(20 + 10)(12) = 180.
  • Rhombus from diagonals: the diagonals bisect each other at right angles, so the side is √((d1/2)² + (d2/2)²). For diagonals 16 and 12 the side is √(64 + 36) = 10, the perimeter is 40 and the area is (1/2)(16)(12) = 96.
  • Area by height: a rhombus is a parallelogram, so area = side × height as well. Here 96 = 10 × height gives height 9.6.
  • Midsegment: the line joining the midpoints of the legs of a trapezium is (a + b)/2, so area = midsegment × height.

Solved Examples

Example 1

Question: The parallel sides of a trapezium are 10 cm and 20 cm and the distance between them is 8 cm. Find its area.

  1. Area = (1/2)(10 + 20) × 8.

Answer: 120 cm².

Example 2

Question: Find the area of an isosceles trapezium with parallel sides 26 cm and 10 cm and legs of 10 cm.

  1. Half the difference of the parallel sides = 8.
  2. h = √(100 – 64) = 6.
  3. Area = (1/2)(36) × 6 = 108.

Answer: 108 cm².

Example 3

Question: The diagonals of a rhombus are 18 cm and 24 cm. Find its side, perimeter, area and height.

  1. Side = √(81 + 144) = 15.
  2. Perimeter = 60.
  3. Area = (1/2) × 18 × 24 = 216.
  4. Height = 216/15 = 14.4.

Answer: Side 15 cm; perimeter 60 cm; area 216 cm²; height 14.4 cm.

Example 4

Question: A rhombus has side 10 cm and one diagonal 12 cm. Find the other diagonal and the area.

  1. Half of the known diagonal = 6.
  2. Half of the other = √(100 – 36) = 8, so the diagonal is 16.
  3. Area = (1/2) × 12 × 16 = 96.

Answer: Other diagonal 16 cm; area 96 cm².

Example 5

Question: A rhombus has diagonals of 16 cm and 12 cm. Find its side, perimeter and area.

  1. Half-diagonals are 8 and 6, so side = √(64 + 36) = 10.
  2. Perimeter = 4 × 10 = 40.
  3. Area = (1/2) × 16 × 12 = 96.

Answer: Side 10 cm, perimeter 40 cm, area 96 cm².

Shortcuts and Tricks

  • Median × height gives the trapezium area directly.
  • Memorise rhombus triples: diagonals 12 and 16 give side 10; 10 and 24 give side 13; 18 and 24 give side 15.
  • Rhombus area from side and height is the same as for a parallelogram.
  • For an isosceles trapezium, drop perpendiculars to make two right triangles.
  • Perimeter of a rhombus needs only the side.

Common Mistakes

  • Dividing only one parallel side by 2 in the trapezium formula.
  • Using the full diagonals as legs for the rhombus side.
  • Using the leg length as the trapezium height.
  • Forgetting that a rhombus has four equal sides.
  • Mixing up the diagonal product with the area.

Practice Questions

  1. Parallel sides 12 and 18 and height 10: find the area of the trapezium.
  2. The diagonals of a rhombus are 30 and 16. Find the side.
  3. Find the area of a rhombus with diagonals 30 and 16.
  4. A rhombus has a side 13 and a diagonal 24. Find its area.
  5. The area of a trapezium is 150 and its parallel sides are 14 and 16. Find the height.

Answers: 1) 150; 2) 17; 3) 240; 4) 120; 5) 10.

Why Is This Topic Important?

  • Foundation These figures appear in composite area questions.
  • Exam use Rhombus and trapezium areas are common.
  • Speed Known triples avoid square roots.
  • Link The cyclic case appears in Properties of a Cyclic Trapezium.

What Comes Next?

The next topic is Area and Circumference of Circle, Sector and Segment, which gives the area and circumference of a circle, a sector and a segment.

Key Terms and Formulas

  • Parallel sides The two bases of a trapezium
  • Height Distance between parallel sides
  • Median Segment joining midpoints of the legs
  • Rhombus Parallelogram with four equal sides
  • Diagonal Segment joining opposite vertices
  • Leg A non-parallel side of a trapezium

Exam Corner

Points to Remember

  • Trapezium area = (1/2)(a + b) h.
  • Rhombus area = (1/2) d1 d2.
  • Rhombus side = √((d1/2)² + (d2/2)²).
  • Rhombus perimeter = 4 × side.
  • The median of a trapezium is (a + b)/2.

Do Not Confuse With

  • Leg vs height The height is perpendicular to the parallel sides.
  • Diagonal vs half-diagonal Use half-diagonals for the side.
  • Rhombus vs square A square also has right angles.
  • Trapezium vs parallelogram A trapezium has one parallel pair.

Memory Hook

Trapezium: half the sum of parallels times height; rhombus: half the product of diagonals.

GS Relevance

Area and perimeter of a trapezium and a rhombus for SSC CGL, CAT and CSAT mensuration.

Frequently Asked Questions

What is the area of a trapezium?

The area of a trapezium equals half of the sum of its parallel sides multiplied by the perpendicular distance between them. For parallel sides 10 and 20 with a height of 8, the area is 120 square units.

What is the area of a rhombus?

The area of a rhombus equals half the product of its two diagonals, and it also equals the side multiplied by the height. For diagonals of 18 and 24 centimetres, the area is 216 square centimetres.

How do you find the side of a rhombus from its diagonals?

The side of a rhombus is the square root of the sum of the squares of half of each diagonal, because the diagonals bisect each other at right angles. For diagonals 18 and 24, the side is the square root of 81 plus 144, which is 15.

What is the perimeter of a rhombus?

The perimeter of a rhombus is four times the length of its side, since all four sides are equal. A rhombus with diagonals 18 and 24 has a side of 15 and a perimeter of 60 units.

How do you find the height of an isosceles trapezium?

The height of an isosceles trapezium is the square root of the leg squared minus the square of half the difference of the parallel sides. With legs 10 and parallel sides 26 and 10, the height is 6.

PYQ Practice — Statement Analysis

1 The area of a rhombus equals half the product of its diagonals.
True

The diagonals are perpendicular.

2 The area of a trapezium is (a + b) × h.
False

It is (1/2)(a + b) h.

3 A rhombus with diagonals 12 and 16 has side 10.
True

√(36 + 64) = 10.

4 The perimeter of a rhombus of side a is 2a.
False

It is 4a.

Share: