Ratio of Areas When Linear Dimensions Are Scaled
Quantitative Aptitude › Mensuration – 2D · Topic 18.9
When every linear dimension of a figure is multiplied by a factor k, its perimeter is multiplied by k and its area by k squared. So the ratio of areas of similar figures equals the square of the ratio of their corresponding sides.
6 min read · Quantitative Aptitude · Mensuration – 2D
Quick Answer
When every linear dimension of a figure is multiplied by a factor k, its perimeter is multiplied by k and its area by k squared. So the ratio of areas of similar figures equals the square of the ratio of their corresponding sides.
At a Glance
- Perimeter Multiplied by k
- Area Multiplied by k²
- Ratio of areas Square of ratio of sides
- Side up by x% Area up by 2x + x²/100 per cent
- Radius doubled Area becomes 4 times
- Rectangle, l up a%, b up b% Area factor (1 + a/100)(1 + b/100)
Where Does It Fit?
This topic applies the percentage ideas of Successive Percentage Change (Two or More Successive Changes) to geometry and uses the area formulas of Area and Perimeter of Square, Rectangle and Parallelogram and Area and Circumference of Circle, Sector and Segment. The next topic, Relationship Between Change in Perimeter and Change in Area, compares changes in perimeter and area.
How Does Area Change When Lengths Are Scaled?
In short: multiplying every length by k multiplies lengths and perimeters by k and areas by k².
| Scale factor k | Length and perimeter | Area | Example |
|---|---|---|---|
| 2 | × 2 | × 4 | Side 5 to 10: area 25 to 100 |
| 3 | × 3 | × 9 | Radius 7 to 21: area 154 to 1386 |
| 1/2 | × 1/2 | × 1/4 | Side 10 to 5: area 100 to 25 |
| 1.2 | × 1.2 | × 1.44 | Side up 20 per cent: area up 44 per cent |
| 1.1 | × 1.1 | × 1.21 | Radius up 10 per cent: area up 21 per cent |
This rule works only when all dimensions are scaled by the same factor, which makes the new figure similar to the old one.
How Do You Find the Percentage Change in Area?
In short: convert each percentage change to a factor, multiply the factors, and subtract 1.
Percentage change in area
- If the side of a square changes by x per cent, the area changes by (2x + x²/100) per cent.
- If length changes by a per cent and breadth by b per cent, the area changes by (a + b + ab/100) per cent.
- Use a minus sign for a decrease.
- Square side up 20%: 1.2 × 1.2 = 1.44, a 44 per cent rise.
- Length up 20%, breadth down 10%: 1.2 × 0.9 = 1.08, an 8 per cent rise.
- Circle radius down 10%: 0.9 × 0.9 = 0.81, a 19 per cent fall.
- The method is a successive percentage change, as in Successive Percentage Change (Two or More Successive Changes).
How Do You Use the Ratio of Areas of Similar Figures?
In short: take the square root of the area ratio to get the ratio of sides and perimeters.
- Circles: radii in the ratio 3 : 5 give areas in the ratio 9 : 25 and circumferences in the ratio 3 : 5.
- Similar triangles: areas in the ratio 4 : 9 mean sides in the ratio 2 : 3, as in Congruence and Similarity of Triangles (SSS, SAS, ASA, AA Criteria).
- Squares: a square on the diagonal of another square has twice its area.
- Cost problems: if the price per unit area is fixed, cost scales with area, so cost scales as k².
Solved Examples
Example 1
Question: The side of a square is increased by 20 per cent. Find the percentage increase in its area.
- New side = 1.2 × old side.
- New area = 1.44 × old area.
Answer: 44 per cent increase.
Example 2
Question: The length of a rectangle is increased by 20 per cent and its breadth decreased by 10 per cent. Find the change in area.
- Factor = 1.2 × 0.9 = 1.08.
Answer: An 8 per cent increase.
Example 3
Question: The radii of two circles are in the ratio 3 : 5. Find the ratio of their areas.
- Areas are proportional to the squares of radii.
- 3² : 5² = 9 : 25.
Answer: 9 : 25.
Example 4
Question: The areas of two similar triangles are 49 cm² and 81 cm². If a side of the smaller is 14 cm, find the corresponding side of the larger.
- Ratio of sides = √(49/81) = 7/9.
- Larger side = 14 × 9/7.
Answer: 18 cm.
Example 5
Question: By what percentage must the radius of a circle be reduced so that its area reduces by 36 per cent?
- New area factor = 0.64, so radius factor = √0.64 = 0.8.
- Reduction = 1 – 0.8.
Answer: 20 per cent.
Shortcuts and Tricks
- Square the scale factor for area: factor 3 gives 9, factor 1.5 gives 2.25.
- For a small percentage change x in a side, the area changes by about 2x per cent.
- Convert to factors: increase 25 per cent is 1.25, decrease 40 per cent is 0.6.
- To go from area ratio to side ratio, take the square root.
- For a rectangle, multiply the length factor and the breadth factor to get the area factor.
Common Mistakes
- Scaling the area by k instead of k².
- Adding percentages without the cross term ab/100.
- Forgetting that perimeter scales by k, not k².
- Taking the square root of the percentage change instead of the area factor.
- Applying the k² rule when only one dimension is scaled.
Practice Questions
- If a square’s side doubles, by what factor does the area increase?
- A circle’s radius increases by 10 per cent. What is the percentage increase in area?
- The areas of two circles are in the ratio 16 : 25. What is the ratio of their radii?
- Length of a rectangle is up 25 per cent and breadth is down 20 per cent. What is the change in area?
- If a square’s side increases from 10 cm to 15 cm, by what percentage does its area increase?
- The perimeter of a square is tripled. By what factor does the area increase?
Answers: 1) 4; 2) 21 per cent; 3) 4 : 5; 4) no change; 5) 125 per cent; 6) 9.
Why Is This Topic Important?
- Pattern Scaling questions are short and common in SSC papers.
- Concept They show why area grows faster than length.
- Speed Factors replace long calculations.
- Link The same square rule applies to surface area in Ratio of Volumes and Surface Areas When Linear Dimensions Are Scaled.
What Comes Next?
The next topic is Relationship Between Change in Perimeter and Change in Area. It compares how perimeter and area change together.
Key Terms and Formulas
- Scale factor The number by which every length is multiplied
- Similar figures Figures with the same shape and proportional sides
- Corresponding sides Sides in the same position in two similar figures
- Area factor The square of the scale factor
- Successive change One percentage change applied after another
- Linear dimension A length, such as a side or a radius
Related Topics
- Area of Shaded/Unshaded Regions in Combined Geometric Figures
- Relationship Between Change in Perimeter and Change in Area
- Area and Perimeter of Triangle (Including Heron’s Formula)
- Area and Perimeter of Square, Rectangle and Parallelogram
Exam Corner
Points to Remember
- Area scales as the square of the linear scale factor.
- Perimeter scales with the linear scale factor.
- Side up x per cent gives area up (2x + x²/100) per cent.
- Area ratio is the square of the side ratio.
- Convert percentages to factors before multiplying.
Do Not Confuse With
- Perimeter factor vs area factor k for perimeter, k² for area.
- Percentage change vs factor A 20 per cent rise is a factor of 1.2.
- Similar vs congruent Similar figures have the same shape; congruent figures have the same shape and size.
- One side vs all sides The k² rule needs every length scaled.
Memory Hook
Lengths go by k, areas go by k squared.
GS Relevance
Frequently Asked Questions
How does area change when the side of a square doubles?
When the side of a square doubles, its area becomes four times as large, because area depends on the square of the side. A square of side 5 cm has area 25 square centimetres, and the doubled square of side 10 cm has area 100 square centimetres.
What is the percentage increase in area when a side increases by 20 per cent?
If the side of a square increases by 20 per cent, the area becomes 1.2 times 1.2, which equals 1.44 times the original, so the area increases by 44 per cent. In general the percentage increase in area is 2x plus x squared over 100 for an increase of x per cent.
What is the ratio of areas of similar figures?
The ratio of the areas of two similar figures equals the square of the ratio of their corresponding sides. For two circles with radii in the ratio 3 to 5, the areas are in the ratio 9 to 25, while their circumferences remain in the ratio 3 to 5.
How do you find the change in area of a rectangle with changed sides?
Convert each percentage change into a factor, multiply the length and breadth factors and subtract 1 to get the change in area. If the length rises by 20 per cent and the breadth falls by 10 per cent, the factor is 1.2 times 0.9, which is 1.08, an 8 per cent rise.
How does perimeter change when lengths are scaled?
When every length of a figure is multiplied by a factor k, the perimeter is multiplied by the same factor k, while the area is multiplied by k squared. For a square whose side goes from 10 cm to 15 cm, the perimeter rises from 40 cm to 60 cm.
PYQ Practice — Statement Analysis
1 If the radius of a circle is doubled, its area becomes four times.
Area depends on the square of the radius.
2 If the side of a square increases by 10 per cent, its area increases by 20 per cent.
It increases by 21 per cent, since 1.1 × 1.1 = 1.21.
3 The ratio of areas of two similar triangles is the square of the ratio of their sides.
This is the scaling rule for similar figures.
4 If the perimeter of a square is tripled, its area becomes nine times.
The side triples, so the area is 3² = 9 times.
Related Topics
Browse the full Quantitative Aptitude index