An Initiative by SAARTHI IAS
Maarg Manthan · Topic 24.4

Symmetry-Based Paper Folding Problems

Reasoning › Non-Verbal Reasoning – Paper Folding and Paper Cutting · Topic 24.4

A symmetry-based paper folding problem is solved by using the fact that the unfolded pattern is a mirror image of itself across every crease. A fold along a vertical or horizontal midline gives left-right or top-bottom symmetry, and a fold along a diagonal of a square sheet swaps the row and column numbers of every hole, so the pattern is symmetric about that diagonal.

Share:
Symmetry-Based Paper Folding Problems - Reasoning - MaargX UPSC Maarg Manthan

Quick Answer

A symmetry-based paper folding problem is solved by using the fact that the unfolded pattern is a mirror image of itself across every crease. A fold along a vertical or horizontal midline gives left-right or top-bottom symmetry, and a fold along a diagonal of a square sheet swaps the row and column numbers of every hole, so the pattern is symmetric about that diagonal.

At a Glance

  • Vertical midline fold Column c goes to 5 – c
  • Horizontal midline fold Row r goes to 5 – r
  • Main diagonal fold Cell (c, r) goes to (r, c)
  • Other diagonal fold Cell (c, r) goes to (5 – r, 5 – c)
  • Hole on a crease Is its own twin
  • Option test Pattern must be symmetric about every crease

Where Does It Fit?

This topic uses the unfolding method of Paper Folding – Predicting the Punched Hole Pattern After Unfolding and the reverse method of Sequential Folding Problems Requiring Reverse Visualization, but focuses on symmetry as a check. It is followed by Paper Folding Problems Involving More Than Two Sequential Folds, which handles longer fold sequences, and relates to the symmetry lines used in Figure Classification – Identifying the Odd Figure Out.

How Does Each Fold Create a Line of Symmetry?

In short: the crease is a mirror line, so the unfolded pattern is a mirror image of itself across it, and every hole not on the crease has exactly one twin.

Crease Twin of cell (column c, row r) on a 4 by 4 sheet
Vertical midline (5 – c, r)
Horizontal midline (c, 5 – r)
Diagonal from bottom-left to top-right (r, c)
Diagonal from top-left to bottom-right (5 – r, 5 – c)

Symmetry checks

  • Cells on the crease are their own twins and do not double.
  • A pattern made by a single vertical fold has a vertical line of symmetry, and no other.
  • A pattern made by both midline folds has both vertical and horizontal symmetry.
  • A pattern made by both diagonal folds is unchanged by a half turn of the sheet.

How Do You Use Symmetry to Pick the Right Option?

In short: test each option for the lines of symmetry the folds create; any option that lacks one is wrong, and often only one option is left.

  1. List the creases from the folds: vertical, horizontal, diagonal.
  2. List the symmetry lines each crease creates in the final pattern.
  3. Test each option by checking that every hole has a twin across each line.
  4. Count holes and compare with the number of layers.
  5. Check the position of the holes relative to the creases, since holes near an edge or a corner stay near it.

The grouping and symmetry-count ideas used here are the same as in Figure Classification – Identifying the Odd Figure Out. The reflection rules for single figures are in Mirror Image of a Given Figure Along a Vertical or Horizontal Axis.

How Do Diagonal Folds Work on a Square?

In short: a diagonal fold of a square makes a triangle, and each hole in the triangle reflects across the diagonal by swapping its column and row numbers.

  • One diagonal fold: two layers, two holes, unless the hole is on the diagonal.
  • Two diagonal folds: the sheet becomes a smaller triangle of four layers, and four holes appear.
  • A diagonal and a midline: the pattern is symmetric about both lines and a hole in general position has four images.
  • All four symmetry lines: a hole in general position has eight images.

The folded triangle covers half of the square for one diagonal fold, and the holes must lie inside it.

Solved Examples

Example 1

Question: A 4 by 4 sheet is folded once along the vertical midline. Which pattern can be made: (a) holes at (1, 2) and (4, 2), or (b) holes at (1, 2) and (3, 2)?

  1. A vertical midline fold makes the pattern symmetric under column c goes to 5 – c.
  2. In (a), column 1 pairs with column 4, so the pattern is symmetric.
  3. In (b), column 1 pairs with column 4, but column 3 is in the list, so the pattern is not symmetric.

Answer: Pattern (a).

Example 2

Question: A 4 by 4 sheet is folded once along the diagonal from bottom-left to top-right, and a hole is punched at column 3, row 1. Where are the holes after unfolding?

  1. The twin of (c, r) across this diagonal is (r, c).
  2. The twin of (3, 1) is (1, 3).

Answer: Holes at (3, 1) and (1, 3).

Example 3

Question: The sheet is folded along both diagonals and a hole is punched at column 3, row 1, which lies in the bottom triangle. Where are the holes after unfolding?

  1. Across the main diagonal: (3, 1) gives (1, 3).
  2. Across the other diagonal: (3, 1) gives (5 – 1, 5 – 3) = (4, 2), and (1, 3) gives (2, 4).

Answer: Four holes at (3, 1), (1, 3), (4, 2) and (2, 4).

Example 4

Question: A 4 by 4 sheet is folded once along the diagonal from bottom-left to top-right and a hole is punched at column 2, row 2. How many holes appear?

  1. The cell (2, 2) lies on the diagonal, so its twin is itself.
  2. The punch falls on the crease, so only one hole is made in the unfolded sheet.

Answer: 1 hole at (2, 2).

Example 5

Question: The sheet has all four symmetry lines (both midlines and both diagonals), and a hole is punched at column 1, row 2, not on any line. How many holes appear?

  1. Vertical midline: (4, 2). Horizontal midline: (1, 3) and (4, 3).
  2. Main diagonal: (2, 1), (3, 1), (2, 4) and (3, 4).
  3. Total: (1, 2), (4, 2), (1, 3), (4, 3), (2, 1), (3, 1), (2, 4), (3, 4).

Answer: 8 holes.

Shortcuts and Tricks

  • For a diagonal fold swap column and row; for the other diagonal swap them and subtract each from 5.
  • Test options for symmetry first; it removes most wrong options without any unfolding.
  • Holes on a crease do not double, so count them separately.
  • A half-turn symmetry follows from two perpendicular symmetry lines.
  • Always recheck that every hole of your answer has a twin across every crease.

Common Mistakes

  • Using the midline formula for a diagonal fold.
  • Doubling a hole that is on the crease.
  • Forgetting the second diagonal when two diagonal folds are made.
  • Marking a pattern symmetric when only some holes have twins.
  • Mixing the two diagonals when swapping the numbers.

Practice Questions

  1. A sheet is folded along the main diagonal (bottom-left to top-right) and a hole is at column 4, row 1. Where is the twin?
  2. A hole at column 1, row 1 is on which diagonal?
  3. A vertical midline fold gives a hole at column 2, row 3. Where is the twin?
  4. How many holes does a general hole make if both midlines are creases?
  5. How many images does a general hole have under all four symmetry lines?
  6. A hole at column 3, row 3 lies on which diagonal?

Answers: 1) (1, 4); 2) the main diagonal from bottom-left to top-right; 3) (3, 3); 4) 4; 5) 8; 6) the main diagonal.

Why Is This Topic Important?

  • Option test A symmetry check often settles the question in seconds.
  • Exam use Symmetry and diagonal folds are asked in SSC and CAPF papers.
  • Foundation Coordinates and reflections link to Mirror Image Problems Involving Complex Multi-Part Figures.
  • Depth Understanding creases as mirror lines makes later topics easy.

What Comes Next?

The next topic is Paper Folding Problems Involving More Than Two Sequential Folds. It extends the method to sheets folded more than twice in sequence.

Key Terms and Formulas

  • Line of symmetry A line across which a pattern matches itself
  • Twin The mirror copy of a hole across a crease
  • Diagonal fold A fold along a diagonal of a square
  • Midline A line through the centre parallel to a side
  • General position Not on any symmetry line
  • Orbit of a hole All images of the hole under the folds

Exam Corner

Points to Remember

  • Every crease is a mirror line.
  • Diagonal fold: swap column and row.
  • Cells on the crease are their own twins.
  • Two folds give 4 images, three give 8.
  • Test options by symmetry first.

Do Not Confuse With

  • Midline vs diagonal A midline passes through the sides; a diagonal passes through opposite corners.
  • Twin vs duplicate A twin is a mirror copy across a crease.
  • On the crease vs near the crease A hole on the crease stays single; one near it has a twin.
  • Main vs other diagonal Main swaps (c, r) to (r, c); the other gives (5 – r, 5 – c).

Memory Hook

Every crease is a mirror: look for the twin.

GS Relevance

Symmetry-based folding questions are common in SSC CGL, CAPF, CDS and railway non-verbal reasoning, where checking symmetry removes wrong options quickly.

Frequently Asked Questions

How does symmetry help in paper folding questions?

Every crease acts as a mirror line, so the unfolded pattern is a mirror image of itself across each crease. Checking each option for the symmetry lines the folds create removes wrong options quickly, often without unfolding the paper at all.

What happens to a hole in a diagonal fold of a square?

A diagonal fold reflects each hole across the diagonal, which swaps its column and row numbers on the grid. For example, a hole at column 3, row 1 has a twin at column 1, row 3 when the sheet is folded along the main diagonal.

What if the hole is punched exactly on the crease?

A hole centred on the crease is cut through both layers at the fold itself, so after unfolding it appears as one hole on the crease rather than two separate holes. Cells on the crease are their own twins and do not double.

How many holes appear with several symmetry lines?

Each independent fold doubles the number of images of a hole in general position. Two folds give 4 holes and three folds give 8 holes. Holes lying on a crease do not double for that crease, so they give fewer holes.

How do you check an option by symmetry?

List the creases and the symmetry lines they create, then check that every hole in the option has a twin across each line. An option that lacks a twin for even one hole, or has an unmatched hole, cannot be the unfolded pattern.

PYQ Practice — Statement Analysis

1 A single vertical midline fold gives a left-right symmetric hole pattern.
True

The crease is the mirror line of the pattern.

2 A hole on the crease appears as two holes after unfolding.
False

It appears as one hole on the crease.

3 A diagonal fold swaps the column and row of each hole on a square grid.
True

The twin of cell (c, r) is (r, c).

4 Two midline folds give a hole in general position 2 images.
False

It gives 4 images.

Share: