Paper Cutting – Predicting the Resulting Shape After a Series of Folds and Cuts
Reasoning › Non-Verbal Reasoning – Paper Folding and Paper Cutting · Topic 24.2
In a paper cutting question, a piece is cut from a folded sheet and the question asks for the shape of the cut-out part after unfolding. The cut region is reflected across each crease in reverse order, so a cut touching a crease joins with its twin into one larger shape, while a cut away from the creases appears as several separate identical cut-outs.
8 min read · Reasoning · Non-Verbal Reasoning – Paper Folding and Paper Cutting
Quick Answer
In a paper cutting question, a piece is cut from a folded sheet and the question asks for the shape of the cut-out part after unfolding. The cut region is reflected across each crease in reverse order, so a cut touching a crease joins with its twin into one larger shape, while a cut away from the creases appears as several separate identical cut-outs.
At a Glance
- Cut touching a crease Joins with its twin into one bigger shape
- Cut away from creases Repeats as separate identical shapes
- Number of cut-outs Up to 2 to the power k after k folds
- Right triangle on a crease Hypotenuse on crease gives a square
- Straight full cut 2 to the power k + 1 pieces for k parallel folds
- Unfold order Reverse of folding
Where Does It Fit?
This topic follows Paper Folding – Predicting the Punched Hole Pattern After Unfolding, where only small holes were punched, and now the removed part has a shape and a size. It prepares for Sequential Folding Problems Requiring Reverse Visualization, Symmetry-Based Paper Folding Problems and Paper Cutting Problems Involving Cuts Made at an Angle, where the cuts become angled and the folds become more complex.
What Happens to a Cut When the Paper Is Unfolded?
In short: each unfold produces a mirror copy of every cut across the crease; a cut that touches the crease joins with its copy and forms a single, larger shape.
| Cut position in the folded sheet | Result after unfolding |
|---|---|
| Away from all creases and edges | Separate identical cut-outs, one per layer |
| Touching one crease | Joined cut-outs: the cut and its copy form one shape on that crease |
| At the corner where two creases meet | Four copies joined at the centre of the sheet |
| At the outer corner of the sheet | Separate corner cuts, one at each outer corner |
| Along the open edge | Cuts on the outer edge, reflected across each crease |
Shapes formed when a cut touches a crease
- Right isosceles triangle with its hypotenuse on the crease: a square standing on a corner.
- Isosceles triangle with its base on the crease: a rhombus (diamond).
- Half-circle with its diameter on the crease: a full circle.
- Small square at the meeting point of two creases: a square of twice the side.
How Do You Solve a Paper Cutting Question Step by Step?
In short: locate the cut relative to the creases, reflect it across each crease in reverse order, and merge any cuts that touch.
- Note the folds and the location of every crease in the folded state.
- Locate the cut: does it touch a crease, a corner where two creases meet, or only the open edges?
- Unfold the last fold first and reflect the cut across its crease.
- Merge shapes that now touch along the crease, forming a bigger shape.
- Repeat for each earlier fold, back to the full sheet.
- Count and describe the cut-outs and compare with the options.
For long sequences of folds, the reverse visualisation in Sequential Folding Problems Requiring Reverse Visualization is the key step; for symmetric sheets see Symmetry-Based Paper Folding Problems.
How Many Pieces Does a Straight Cut Make?
In short: a straight cut across a sheet folded k times in the same direction cuts it into 2 to the power k plus 1 pieces, when the cut is parallel to the creases and runs completely through.
- One fold, cut parallel to the crease: the cut makes 2 lines on the opened sheet, giving 3 pieces.
- Two folds in the same direction: the cut makes 4 lines, giving 5 pieces.
- Three folds in the same direction: the cut makes 8 lines, giving 9 pieces.
- Cut on the crease: cutting along a crease separates the sheet at that crease only; one fold gives 2 pieces.
- Cut perpendicular to the crease: a cut across the fold line from edge to edge makes 2 pieces from the folded sheet, but when unfolded the pieces joined at the crease form one piece, so the count is 2 for one fold.
Solved Examples
Example 1
Question: A square sheet is folded once, left over right. A small right isosceles triangle is cut from the crease edge, with its hypotenuse lying along the crease. What shape is cut out after unfolding?
- The crease reflects the triangle onto the other side.
- Two right isosceles triangles joined along their common hypotenuse form a square.
Answer: A square standing on a corner (a diamond).
Example 2
Question: A sheet is folded twice (left over right, then bottom up over top), so that the centre of the sheet is the inner corner of the folded square. A small square of side s is cut from that inner corner. What is cut out after unfolding?
- The cut touches both creases, so it is reflected into four squares around the centre.
- Each reflected square shares edges with its neighbours, so they form a single square of side 2s.
Answer: One square of side 2s at the centre of the sheet.
Example 3
Question: The same two folds are made, and a small square is cut from the outer corner of the folded sheet (a corner of the original sheet). What is cut out after unfolding?
- The cut does not touch a crease, so its copies stay separate.
- One copy appears at each of the four corners of the sheet.
Answer: Four separate small squares, one at each corner of the sheet.
Example 4
Question: A sheet is folded in half and a half-circle with its diameter on the crease is cut out. What is cut out after unfolding?
- The cut touches the crease along its diameter.
- Its mirror copy joins it along the diameter.
Answer: A full circle on the crease.
Example 5
Question: A sheet is folded twice in the same direction (always left over right) and a straight vertical cut is made through all layers, parallel to the creases and away from them. How many pieces result?
- After two folds there are 2 squared = 4 layers, so the cut makes 4 lines when opened.
- Four parallel lines divide the sheet into 4 + 1 = 5 pieces.
Answer: 5 pieces.
Shortcuts and Tricks
- Ask first whether the cut touches a crease; this alone decides between a joined shape and separate cuts.
- A cut at the point where two creases meet becomes one large shape at the centre.
- Use the formulas: half shape on a crease doubles to the full shape.
- Count the cut-outs: one per layer for cuts away from creases.
- For straight cuts across folded layers use 2 to the power k plus 1 pieces.
Common Mistakes
- Showing a separate pair of cuts when the cut touches the crease and must join.
- Reflecting the cut only once when there are two folds.
- Forgetting that the cut-out at the outer corner appears at each of the four corners.
- Counting 2 to the power k pieces instead of 2 to the power k plus 1 for a straight cut.
- Drawing a half shape on the crease instead of the full shape.
Practice Questions
- A half-circle with its diameter on the crease is cut from a once-folded sheet. What shape is removed after unfolding?
- A sheet is folded once and a straight cut is made through the layers parallel to the crease. How many pieces?
- A sheet is folded three times in the same direction and cut by a straight parallel cut. How many pieces?
- After two folds, a small triangle is cut at the outer corner of the sheet. How many triangular cuts appear on unfolding?
- A right isosceles triangle with its legs along the crease and the open edge is cut. Does the cut join its copy?
- Two folds meet at the centre of the sheet and a small square of side 1 is cut at that centre corner. What is the side of the cut-out square?
Answers: 1) a full circle; 2) 3; 3) 9; 4) 4; 5) yes, along the crease; 6) 2.
Why Is This Topic Important?
- Shape reasoning You learn how a single cut becomes a full shape.
- Exam use Cutting questions are asked in SSC, CAPF and railway reasoning.
- Method The crease test removes most wrong options.
- Link The reversal skill is the same as in Paper Folding – Predicting the Punched Hole Pattern After Unfolding and Paper Folding Problems Involving More Than Two Sequential Folds.
What Comes Next?
The next topic is Sequential Folding Problems Requiring Reverse Visualization. It builds the habit of reversing a sequence of folds mentally.
Key Terms and Formulas
- Cut-out The removed region of the sheet
- Crease A fold line
- Joined cut A cut that touches a crease and merges with its copy
- Layer One thickness of the folded paper
- Straight cut A cut along a line through all layers
- Outer corner A corner of the original sheet
Related Topics
- Paper Folding – Predicting the Punched Hole Pattern After Unfolding
- Sequential Folding Problems Requiring Reverse Visualization
- Symmetry-Based Paper Folding Problems
- Paper Folding Problems Involving More Than Two Sequential Folds
Exam Corner
Points to Remember
- A cut touching a crease joins with its copy.
- A cut away from creases repeats as separate shapes.
- Half shapes on a crease become full shapes.
- A cut at the centre corner makes one shape of twice the size.
- A straight parallel cut after k folds gives 2 to the power k plus 1 pieces.
Do Not Confuse With
- Cut vs punch A cut removes a shape; a punch removes a small hole.
- Joined vs separate Touching a crease joins the copies; staying away keeps them separate.
- Layers vs pieces Layers are in the folded sheet; pieces are after a full cut and unfolding.
- Crease vs edge A crease reflects the cut; an edge does not.
Memory Hook
Touch the crease and the shape doubles; stay away and it repeats.
GS Relevance
Frequently Asked Questions
How do you solve paper cutting questions in reasoning?
Locate the cut relative to the creases, unfold in the reverse order, and reflect the cut across each crease. A cut that touches a crease joins with its copy into one larger shape, while a cut away from the creases appears as separate identical shapes.
What shape does a triangle cut on the crease make?
A right isosceles triangle with its hypotenuse on the crease gives a square standing on a corner. An isosceles triangle with its base on the crease gives a rhombus. In both cases the triangle joins with its mirror copy across the crease.
How many pieces does a straight cut make from a folded sheet?
A straight cut through a sheet folded k times in the same direction, parallel to the creases, divides it into 2 to the power k plus 1 pieces. One fold gives 3 pieces, two folds give 5 pieces and three folds give 9 pieces.
What happens to a cut at the corner where two creases meet?
A cut at the inner corner where both creases meet is reflected into four copies around the centre of the sheet, and they join into one shape of twice the size. A small square of side s becomes a square of side 2s.
How is paper cutting different from paper folding with a hole?
A punched hole is a small point that is reflected as separate holes. A cut removes a shape, and if the shape touches a crease its reflection joins it, so the unfolded result may be one larger shape rather than several small ones.
PYQ Practice — Statement Analysis
1 A half-circle cut on the crease gives a full circle after unfolding.
The mirror copy joins along the diameter.
2 Two folds in the same direction and one straight parallel cut give 4 pieces.
The cut makes 4 lines, so there are 5 pieces.
3 A cut away from every crease appears as one joined shape.
It appears as separate identical cuts, one per layer.
4 A small square cut at the corner where two creases meet gives a square of twice the side.
Four copies around the centre join into one square of side 2s.
Related Topics
Browse the full Reasoning index