Paper Folding – Predicting the Punched Hole Pattern After Unfolding
Reasoning › Non-Verbal Reasoning – Paper Folding and Paper Cutting · Topic 24.1
To predict the punched hole pattern after unfolding a sheet of paper, undo the folds in the reverse order, and at each unfold reflect every existing hole across the fold line (crease) to get its twin. A hole punched through all the layers of k folds gives 2 to the power k holes, and each hole sits at the mirror position of another across every crease.
9 min read · Reasoning · Non-Verbal Reasoning – Paper Folding and Paper Cutting
Quick Answer
To predict the punched hole pattern after unfolding a sheet of paper, undo the folds in the reverse order, and at each unfold reflect every existing hole across the fold line (crease) to get its twin. A hole punched through all the layers of k folds gives 2 to the power k holes, and each hole sits at the mirror position of another across every crease.
At a Glance
- Unfold order Reverse of the folding order
- Each unfold Reflect every hole across the crease
- Layers after k folds 2 to the power k
- Holes from one punch As many as the layers it passes through
- Hole on a crease Gives one hole per two layers (cut in half)
- Check Pattern must be symmetric about each crease
Where Does It Fit?
This is the first topic of the Paper Folding and Paper Cutting macro. The next topic, Paper Cutting – Predicting the Resulting Shape After a Series of Folds and Cuts, uses the same reflections for cut shapes, and Sequential Folding Problems Requiring Reverse Visualization trains reverse visualisation of folds in sequence. The earlier reflection rules of Mirror Image of a Given Figure Along a Vertical or Horizontal Axis are the base skill.
How Does a Hole Multiply Through Folds?
In short: every fold doubles the layers of paper, and a punch through the folded sheet makes one hole in every layer, so each unfolded hole is the reflection of another across a crease.
| Folds made | Layers where all folds overlap | Holes from one punch |
|---|---|---|
| 1 | 2 | 2 |
| 2 | 4 | 4 |
| 3 | 8 | 8 |
| 4 | 16 | 16 |
The numbers hold when the hole is made where all the layers lie on top of each other and the hole is not on a crease. A hole on a crease is cut across two layers and so appears as one hole in the unfolded sheet, shared by both sides of the crease.
Counting rule
- Holes after unfolding = 2 to the power k, for k folds, if the punch passes through all layers away from creases.
- If a punch falls in a part where only some of the layers exist, the hole count equals the number of layers at that spot.
- Unfolding pattern is always symmetric about every crease line.
How Do You Unfold Step by Step?
In short: number the cells of the sheet, write the position of the hole in the folded state, and reflect it across each crease from the last fold to the first.
- Set up coordinates. Number the columns 1 to 4 from the left and the rows 1 to 4 from the bottom on a square sheet divided into 16 cells.
- Record the folds in order, noting which half moves and which crease it turns about.
- Locate the hole in the folded sheet as a cell number.
- Unfold the last fold first. Reflect each hole across that crease: a vertical crease between columns 2 and 3 sends column c to column 5 – c; a horizontal crease between rows 2 and 3 sends row r to row 5 – r.
- Continue back to the first fold and list the holes.
- Check symmetry of the final pattern about each crease.
After a fold of the left half over the right, only columns 3 and 4 remain; a second vertical fold would use the crease between columns 3 and 4, and the unfolding formula changes to column c goes to 7 – c. The reverse-visualisation habit is built further in Sequential Folding Problems Requiring Reverse Visualization.
What Are the Common Variations?
In short: the variations are the number of folds, the direction of folds (vertical, horizontal or diagonal) and the shape or position of the punch.
- Same-direction folds: two vertical folds in a row give holes across the width: four columns of repeated holes.
- Mixed folds: one vertical and one horizontal fold produce a pattern symmetric left-right and top-bottom.
- Diagonal folds: the crease is a diagonal and the reflection swaps row and column; see Symmetry-Based Paper Folding Problems.
- Different punch shapes: a triangle or circle is reflected too, so an apex-up triangle becomes an apex-down triangle across a horizontal crease.
- Cut instead of punch: a cut removes an area and is treated in Paper Cutting – Predicting the Resulting Shape After a Series of Folds and Cuts.
Solved Examples
Example 1
Question: A square sheet of 4 by 4 cells is folded once with the left half over the right half. A hole is punched at column 4, row 2 of the folded sheet. Where are the holes after unfolding?
- The crease lies between columns 2 and 3, so column c reflects to 5 – c.
- The hole at column 4 reflects to column 1 in the same row.
Answer: Holes at (column 4, row 2) and (column 1, row 2).
Example 2
Question: The same sheet is folded left over right and then the bottom half is folded up over the top half. A hole is punched at column 4, row 3 of the folded sheet. Where are the holes after unfolding?
- After the folds, only columns 3 and 4 and rows 3 and 4 remain.
- Unfold the second fold: the horizontal crease sends row r to 5 – r, so (4, 3) gives (4, 2) as well.
- Unfold the first fold: the vertical crease sends column c to 5 – c, so (4, 3) gives (1, 3) and (4, 2) gives (1, 2).
Answer: Four holes at (4, 3), (4, 2), (1, 3) and (1, 2).
Example 3
Question: The same two folds are made and the hole is punched at column 3, row 3 of the folded sheet. Where are the holes after unfolding?
- Unfold the second fold: (3, 3) gives (3, 2).
- Unfold the first fold: column 3 reflects to column 2, so (3, 3) gives (2, 3) and (3, 2) gives (2, 2).
Answer: Four holes at the central cells (2, 2), (2, 3), (3, 2) and (3, 3).
Example 4
Question: A sheet is folded three times and a hole is punched through all the layers away from every crease. How many holes does it show on unfolding?
- Each fold doubles the layers: 2, 4, 8.
- A punch through 8 layers gives 8 holes.
Answer: 8 holes.
Example 5
Question: A 4 by 4 sheet is folded three times: left over right, bottom up over top, and then left over right again. The remaining region is column 4, rows 3 and 4. A hole is punched at column 4, row 4. Where are the holes after unfolding?
- The last fold had its crease between columns 3 and 4, so column c reflects to 7 – c: (4, 4) gives (3, 4).
- The second fold crease is between rows 2 and 3: row r reflects to 5 – r, giving (4, 1) and (3, 1) as well.
- The first fold crease is between columns 2 and 3: column c reflects to 5 – c, giving (1, 4), (2, 4), (1, 1) and (2, 1).
Answer: Eight holes: every cell of row 1 and every cell of row 4.
Shortcuts and Tricks
- Number cells and use the reflection formulas rather than drawing every unfolded sheet.
- Count holes first: 2 to the power of the number of folds eliminates options with the wrong count.
- Remember the final pattern must be symmetric about every crease line.
- Unfold in the reverse order, and reflect all existing holes each time, not just the original one.
- A hole near the open edge of the folded sheet lands near the outer edge after unfolding.
Common Mistakes
- Unfolding in the same order as folding instead of the reverse order.
- Reflecting only the original hole and not the holes made by earlier unfolds.
- Using the wrong crease position after a second fold in the same direction.
- Forgetting that a hole on a crease appears once in the unfolded sheet.
- Counting 2 holes for k folds when the answer is 2 to the power k.
Practice Questions
- A sheet is folded twice and a hole is punched through all layers away from the creases. How many holes appear?
- On a 4 by 4 sheet folded left over right, a hole is at column 3, row 1. Where are the holes after unfolding?
- How many layers are there after 4 folds?
- A 4 by 4 sheet is folded top over bottom, leaving rows 1 and 2, and a hole is at column 2, row 2. Where are the holes after unfolding?
- A 4 by 4 sheet is folded top over bottom and then right over left, and a hole is at column 1, row 1 of the folded sheet. Where are the holes?
- Is the final hole pattern symmetric about the first crease?
Answers: 1) 4; 2) (3, 1) and (2, 1); 3) 16; 4) (2, 2) and (2, 3); 5) the four corner cells (1, 1), (1, 4), (4, 1) and (4, 4); 6) yes, always.
Why Is This Topic Important?
- Visualisation skill You learn to reverse a sequence of operations mentally.
- Exam use Folding and punching questions appear in SSC, CAPF and railway reasoning papers.
- Method Cell numbers and reflections remove guesswork.
- Link The same reversal idea applies to Sequential Folding Problems Requiring Reverse Visualization and Paper Folding Problems Involving More Than Two Sequential Folds.
What Comes Next?
The next topic is Paper Cutting – Predicting the Resulting Shape After a Series of Folds and Cuts. It replaces the punched hole by a cut and asks for the resulting shape.
Key Terms and Formulas
- Crease The fold line on the paper
- Layer One thickness of paper in the folded sheet
- Unfolding Opening the folds in the reverse order
- Reflection across a crease Placing a mirror twin of a hole on the other side
- Punch A hole made through all layers at once
- Folded state The sheet while it is folded
Related Topics
- Paper Cutting – Predicting the Resulting Shape After a Series of Folds and Cuts
- Sequential Folding Problems Requiring Reverse Visualization
- Symmetry-Based Paper Folding Problems
- Paper Folding Problems Involving More Than Two Sequential Folds
Exam Corner
Points to Remember
- Unfold in the reverse order of folding.
- Reflect all holes across each crease.
- After k folds a full punch gives 2 to the power k holes.
- The final pattern is symmetric about every crease.
- Use cell numbers for accuracy.
Do Not Confuse With
- Fold order vs unfold order Unfold in the reverse order of the folds.
- Layers vs holes The number of holes equals the number of layers pierced.
- Crease vs edge A crease is a fold line inside the sheet; an edge is a boundary.
- Punch vs cut A punch makes a small hole; a cut removes an area and is covered in Paper Cutting – Predicting the Resulting Shape After a Series of Folds and Cuts.
Memory Hook
Unfold backwards, mirror every hole at every crease.
GS Relevance
Frequently Asked Questions
How do you solve paper folding punched hole questions?
Note the order of folds, find the hole position in the folded sheet, and then unfold in the reverse order. At each unfold reflect every existing hole across the crease line, and finally check that the pattern is symmetric about every crease.
How many holes appear after unfolding a punched sheet?
A punch through all layers after k folds makes 2 to the power k holes, because each fold doubles the layers. One fold gives 2 holes, two folds give 4 and three folds give 8, provided the hole is away from the creases.
In which order should you unfold the paper?
Unfold in the reverse order of folding, so the last fold is undone first. This is necessary because each reflection happens across a crease whose position depends on the earlier folds, and doing it in the wrong order puts holes in the wrong places.
What happens to a hole on the crease?
A hole punched exactly on a crease is cut through the layers at the fold, so after unfolding it appears as one hole centred on the crease rather than two separate holes. Most exam questions avoid this and punch away from the creases.
How can cell numbers help in paper folding questions?
Dividing the sheet into numbered cells turns every reflection into a simple formula, such as column c goes to 5 minus c on a four-column sheet. This replaces visual guesswork with arithmetic and makes long multi-fold questions quick and reliable.
PYQ Practice — Statement Analysis
1 A sheet folded twice and punched through all layers shows 4 holes on unfolding.
Two folds give 4 layers, so the punch makes 4 holes.
2 The paper should be unfolded in the same order as it was folded.
It must be unfolded in the reverse order.
3 The final pattern of holes is symmetric about every crease line.
Each unfold reflects the holes across a crease.
4 Three folds and a full punch give 6 holes.
Three folds make 8 layers, so 8 holes appear.
Related Topics
Browse the full Reasoning index