An Initiative by SAARTHI IAS
Maarg Manthan · Topic 24.6

Paper Cutting Problems Involving Cuts Made at an Angle

Reasoning › Non-Verbal Reasoning – Paper Folding and Paper Cutting · Topic 24.6

In paper cutting with angled cuts, a straight cut made at an angle (for example 45 degrees) to the fold lines is reflected across every crease when the sheet is unfolded. The angle of the cut is preserved in every image, the direction of its slope reverses across each crease it is reflected over, and cuts reaching a crease join with their twins to form shapes such as notches, diamonds and cut corners.

Share:
Paper Cutting Problems Involving Cuts Made at an Angle - Reasoning - MaargX UPSC Maarg Manthan

Quick Answer

In paper cutting with angled cuts, a straight cut made at an angle (for example 45 degrees) to the fold lines is reflected across every crease when the sheet is unfolded. The angle of the cut is preserved in every image, the direction of its slope reverses across each crease it is reflected over, and cuts reaching a crease join with their twins to form shapes such as notches, diamonds and cut corners.

At a Glance

  • Angle of the cut Preserved in every image
  • Slope across a crease Reverses direction
  • Corner cut at the sheet corner Repeats at every corner
  • Cut ending on a crease Joins with its twin
  • Area removed Area in the folded sheet times the layers
  • Coordinates Use a 4 by 4 square with corners at 0 and 4

Where Does It Fit?

This is the last topic of the Paper Folding and Paper Cutting macro. It uses the crease reflections of Paper Folding – Predicting the Punched Hole Pattern After Unfolding on the shapes of Paper Cutting – Predicting the Resulting Shape After a Series of Folds and Cuts, and the reverse unfolding of Sequential Folding Problems Requiring Reverse Visualization and Paper Folding Problems Involving More Than Two Sequential Folds. The next macro, with Counting the Number of Triangles in a Given Complex Figure, moves to counting figures.

How Is a Slanted Cut Reflected?

In short: a reflection across a crease keeps lengths and angles but reverses the direction of the cut, so a line rising to the right becomes a line falling to the right when mirrored across a vertical crease.

Cut in the folded sheet Crease Image after unfolding
Line rising to the right (slope +1) Vertical crease Line falling to the right (slope -1)
Line rising to the right (slope +1) Horizontal crease Line falling to the right (slope -1)
Vertical line Vertical crease Vertical line
Horizontal line Vertical crease Horizontal line

Rules for angled cuts

  • The angle of the cut with the crease is the same on both sides of the crease.
  • If the cut meets the crease, the two images meet at the same point on the crease and form a V shape or a diamond.
  • A corner cut in the folded sheet at the corner of the original sheet repeats at every corner.
  • Lengths and areas of the images equal those of the cut.

How Do You Solve an Angled Cut Question Step by Step?

In short: mark the cut with coordinates, reflect each end point across each crease in reverse order, and join the images in the same order.

  1. Place coordinates on a sheet of side 4 with corners at (0, 0), (4, 0), (4, 4) and (0, 4).
  2. Record the creases: for example x = 2 for the first vertical fold and y = 2 for a horizontal fold.
  3. Write the end points of the cut and the region it removes.
  4. Reflect the end points across the last crease, then across the earlier creases, using 2m – a.
  5. Join the images and describe the shape: notch, corner cut, diamond.
  6. Check the area: the total removed area equals the cut area times the number of layers.

For straight cuts and the shapes formed by cuts on the crease, see Paper Cutting – Predicting the Resulting Shape After a Series of Folds and Cuts.

Which Shapes Appear Most Often?

In short: exam questions mostly give a corner cut, a V-shaped notch on an edge, or a diamond hole at the centre.

  • Corner cut: a triangle cut off a corner; repeated at all four corners after two folds, leaving an octagon.
  • Edge notch: a triangle cut with one side on the crease and the opposite vertex on the open edge; it unfolds into a V-shaped notch on the edge.
  • Centre diamond: a right isosceles triangle with its legs on the two creases at the centre; four copies form a square standing on a corner.
  • Slot: a thin parallelogram cut away from creases; copies stay separate.

Solved Examples

Example 1

Question: A 4 by 4 sheet is folded in half with the left half over the right half, so the folded sheet covers x from 2 to 4. A triangle with corners (3, 4), (4, 4) and (4, 3) is cut off, with the cut along the 45 degree line from (3, 4) to (4, 3). What does the unfolded sheet look like?

  1. Reflect across the crease x = 2: x goes to 4 – x, so (3, 4), (4, 4), (4, 3) become (1, 4), (0, 4), (0, 3).
  2. The cut is a corner triangle with legs 1 at the top-right corner and its copy at the top-left corner.

Answer: A rectangle with the two top corners cut off by 45 degree lines (legs of length 1).

Example 2

Question: The same sheet is folded the same way. A triangle with corners (2, 4), (3, 4) and (2, 3) is cut off, with its leg on the crease. What does the unfolded sheet show?

  1. Reflect across x = 2: the corners become (2, 4), (1, 4), (2, 3).
  2. The two triangles share the side from (2, 4) to (2, 3) and form one triangle with vertices (1, 4), (3, 4) and (2, 3).

Answer: A V-shaped notch with its top edge on the top edge of the sheet (length 2) and apex at (2, 3), area 1.

Example 3

Question: A 4 by 4 sheet is folded twice (left over right, bottom over top) so the folded sheet covers x and y from 2 to 4. A triangle with legs 1 is cut off the corner (4, 4). How many triangular cuts appear on unfolding and what remains?

  1. The cut does not touch a crease, so each reflection gives a separate image.
  2. Four images appear, one at each corner of the original sheet.
  3. Each removes area 1/2, so the removed area is 2 and the remaining area is 16 – 2 = 14.

Answer: 4 corner triangles are cut off, leaving an octagon of area 14.

Example 4

Question: In the same quarter-folded sheet a triangle with corners (2, 2), (3, 2) and (2, 3) is cut off at the inner corner, which is the centre of the original sheet. What does the unfolded sheet show?

  1. The triangle has legs along both creases, so it joins with its images in all four quadrants.
  2. The four copies form a square with vertices (1, 2), (2, 1), (3, 2) and (2, 3), standing on a corner.

Answer: A diamond-shaped hole at the centre (a square with diagonal 2 and area 2).

Example 5

Question: What is the area removed in the previous question?

  1. The cut triangle has area 1/2 x 1 x 1 = 1/2.
  2. With 4 layers, the removed area is 4 x 1/2 = 2.
  3. A diamond with diagonals 2 and 2 has area 1/2 x 2 x 2 = 2.

Answer: 2 square units.

Shortcuts and Tricks

  • Convert every cut to coordinates and reflect the end points; the shape follows from joining them.
  • Check area with layers times cut area; it must match the area of the unfolded cut.
  • A corner cut at the outer corner always repeats at all four corners after two perpendicular folds.
  • A triangle with its legs on the creases becomes a square on a corner at the centre.
  • Reflection never changes the angle of the cut.

Common Mistakes

  • Keeping the slope direction of a slanted cut unchanged in the mirror image.
  • Forgetting to join cuts that reach a crease.
  • Missing the images at the other corners after two folds.
  • Using the wrong crease position for a reflection.
  • Not checking the total removed area.

Practice Questions

  1. A triangle with legs 1 is cut from the outer corner of a sheet folded twice. How many corners are cut after unfolding?
  2. A triangle with legs 2 is cut off an outer corner of a sheet folded once. What area is removed after unfolding?
  3. A slanted cut with slope +1 is reflected in a vertical crease. What is the slope of the image?
  4. A right isosceles triangle with legs 1 on the creases at the centre of a quarter-folded sheet gives which shape?
  5. A 4 by 4 sheet has all four corners cut off with legs 1. How many sides does the remaining shape have?
  6. Reflect the point (3, 4) across the crease x = 2.

Answers: 1) 4; 2) 4; 3) -1; 4) a square standing on a corner (diamond) of area 2; 5) 8; 6) (1, 4).

Why Is This Topic Important?

  • Hardest cutting variant Angled cuts test every reflection rule together.
  • Exam use They appear in SSC, CAPF and CDS papers.
  • Method Coordinates make the shape certain.
  • Link The same reflection arithmetic applies in Mirror Image Problems Involving Complex Multi-Part Figures and Paper Folding Problems Involving More Than Two Sequential Folds.

What Comes Next?

The next macro begins with Counting the Number of Triangles in a Given Complex Figure. It moves from folding paper to counting triangles in complex figures.

Key Terms and Formulas

  • Angled cut A cut that is not parallel or perpendicular to the creases
  • Corner cut A triangle removed from a corner
  • Notch A V-shaped cut on an edge
  • Diamond A square standing on a corner
  • Slope The direction of a line, rising or falling
  • Reflection of a point Coordinate a goes to 2m – a across a crease at m
  • Paper Folding Problems Involving More Than Two Sequential Folds
  • Paper Folding – Predicting the Punched Hole Pattern After Unfolding
  • Paper Cutting – Predicting the Resulting Shape After a Series of Folds and Cuts
  • Sequential Folding Problems Requiring Reverse Visualization

Exam Corner

Points to Remember

  • The angle of the cut is the same in every image.
  • The slope direction reverses across a crease.
  • Cuts reaching a crease join with their twins.
  • Corner cuts repeat at every corner after two folds.
  • Removed area equals layers times cut area.

Do Not Confuse With

  • Angle vs slope direction The angle is preserved; the direction of the slope reverses.
  • Corner cut vs notch A corner cut is at the sheet corner; a notch is on an edge.
  • Joined vs separate images Cuts touching a crease join; others stay apart.
  • Cut area vs removed area Removed area is the cut area times the number of layers.

Memory Hook

The angle stays, the slope flips, the crease joins.

GS Relevance

Angled cut questions occur in SSC CGL, CAPF and CDS non-verbal reasoning, usually as the hardest paper cutting variant, and reward careful coordinate work.

Frequently Asked Questions

How do you solve paper cutting with an angled cut?

Place coordinates on the sheet, write the end points of the cut, and reflect them across each crease in reverse order using the formula 2m minus a. Join the reflected points to find the shape, and check that the removed area equals the cut area times the number of layers.

What happens to the angle of a slanted cut after unfolding?

The angle of the cut is the same in every image, because a reflection preserves angles and lengths. However the direction of the slope reverses across a crease, so a line rising to the right becomes a line falling to the right in the mirror image.

What shape does a corner triangle cut make after two folds?

A triangle cut off the outer corner of a sheet folded twice appears at all four corners of the unfolded sheet. The remaining sheet has eight sides, and its area is the original area minus four times the area of the cut triangle.

What does a triangle cut on two creases make?

A right isosceles triangle with its legs on the two creases at the centre of the sheet forms four copies around the centre. Together they make a square standing on a corner, with a side equal to the hypotenuse of the cut triangle.

How can you check the answer to an angled cut question?

Compare areas. The area removed from the unfolded sheet must equal the area of the cut in the folded sheet multiplied by the number of layers. Also check that cuts reaching a crease have joined with their twins and that the angle is the same in every image.

PYQ Practice — Statement Analysis

1 A reflection changes the angle of a slanted cut.
False

A reflection preserves angles and lengths.

2 A corner triangle cut from the outer corner of a twice folded sheet appears at four corners.
True

Two perpendicular folds give four images of an outer corner cut.

3 A slanted cut with slope +1 has slope -1 in its mirror image across a vertical crease.
True

The direction of the slope reverses.

4 The area removed equals the area of the cut in the folded sheet.
False

It equals the cut area times the number of layers.

Share: