An Initiative by SAARTHI IAS
Maarg Manthan · Topic 10.8

Problems on Escalators and Moving Walkways

Quantitative Aptitude › Time, Speed and Distance · Topic 10.8

On an escalator or moving walkway, a person's effective speed is the person's own speed plus the speed of the escalator when moving with it, and the difference when moving against it. The time to cover the length is length divided by this effective speed.

Share:
Problems on Escalators and Moving Walkways - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

On an escalator or moving walkway, a person’s effective speed is the person’s own speed plus the speed of the escalator when moving with it, and the difference when moving against it. The time to cover the length is length divided by this effective speed.

At a Glance

  • With the escalator Speeds add
  • Against the escalator Speeds subtract
  • Time on it Length ÷ effective speed
  • Combined time 1/t = 1/t1 + 1/t2
  • Steps counted N = steps taken × (1 + k)
  • Link to Relative speed

Where Does It Fit?

This topic applies Relative Speed – Same Direction and Opposite Direction to a moving surface. It also uses the idea of rates adding, which is the same idea as in Combined Work by Multiple Persons or Groups, and unit handling from Speed, Distance and Time Basic Relationship and Unit Conversion (km/h to m/s).

How Do You Find the Time on a Moving Escalator or Walkway?

In short: the escalator adds its own movement to a person moving with it, and removes it from a person moving against it.

Movement Effective speed Time
Standing on the escalator e L ÷ e
Walking with it at speed w w + e L ÷ (w + e)
Walking against it at speed w w – e L ÷ (w – e)

Here L is the length, w is the walking speed and e is the escalator speed. If the person’s walking speed is smaller than e when going against it, the person is carried back.

Rates form

  • If the escalator alone takes t1 and walking alone takes t2, together they take t where 1/t = 1/t1 + 1/t2.
  • This is the same reciprocal rule used for combined work.

How Is the Number of Visible Steps Found?

In short: let the person’s speed be a steps per unit time and the escalator’s speed e steps per unit time, and use the fact that the number of visible steps N stays fixed.

  • Walking down with a downward escalator: N = steps taken × (1 + e/a).
  • Walking up against a downward escalator: N = steps taken × (1 – e/a).
  • Two equations, two unknowns: equate the two expressions to find e/a, then find N.

This is similar to the boat and stream problems of Boats and Streams – Upstream and Downstream Speed Problems.

Solved Examples

Example 1

Question: An escalator of length 30 m moves at 0.5 m/s. How long does a person standing on it take, and how long if the person walks with it at 1 m/s?

  1. Standing: time = 30 ÷ 0.5 = 60 seconds.
  2. Walking with it: effective speed = 1 + 0.5 = 1.5 m/s.
  3. Time = 30 ÷ 1.5 = 20 seconds.

Answer: 60 seconds standing and 20 seconds walking.

Example 2

Question: A man walks 90 m on a moving walkway in 40 seconds at 1.5 m/s of his own speed. Find the speed of the walkway and the time he takes walking against it.

  1. Effective speed = 90 ÷ 40 = 2.25 m/s.
  2. Walkway speed = 2.25 – 1.5 = 0.75 m/s.
  3. Against it, effective speed = 1.5 – 0.75 = 0.75 m/s.
  4. Time = 90 ÷ 0.75 = 120 seconds.

Answer: 0.75 m/s and 120 seconds.

Example 3

Question: A man going down a moving escalator takes 30 steps, and going up the same escalator takes 90 steps, at the same walking rate. Find the number of visible steps.

  1. Let k = e/a, the escalator speed over the man’s speed.
  2. N = 30(1 + k) and N = 90(1 – k).
  3. 30 + 30k = 90 – 90k gives 120k = 60 and k = 0.5.
  4. N = 30 × 1.5 = 45.

Answer: There are 45 visible steps.

Example 4

Question: An escalator carries a standing person in 40 s, and the person walking on it takes 24 s. How long does the person take walking on a stationary escalator?

  1. 1/24 = 1/t2 + 1/40.
  2. 1/t2 = 1/24 – 1/40 = (5 – 3)/120 = 1/60.

Answer: 60 seconds.

Shortcuts and Tricks

  • Use effective speed = own speed ± escalator speed.
  • For two rates, use 1/t = 1/t1 + 1/t2.
  • For step problems, express the fixed number of visible steps in two ways and equate.
  • A moving walkway in a straight line is treated exactly like a stream.
  • Keep the speeds in the same unit as the length.

Common Mistakes

  • Adding speeds when the person walks against the escalator.
  • Using different units for walkway length and speed.
  • Forgetting that the number of visible steps stays fixed in both directions.
  • Using t1 + t2 as the combined time instead of the reciprocal rule.
  • Assuming the person is stationary when the question gives a walking speed.

Practice Questions

  1. Escalator 0.6 m/s and 36 m long. Time for a standing person?
  2. A person walks at 1.2 m/s with the same escalator. Time?
  3. A walkway is 120 m long, moving at 1 m/s. A man walks at 2 m/s with it. Time?
  4. The same man walks against the walkway at 2 m/s. Time?
  5. An escalator alone takes 30 s and walking on it takes 20 s. Walking alone on a still escalator?
  6. A man takes 20 steps down an escalator and 60 steps up. Visible steps?

Answers: 1) 60 seconds; 2) 20 seconds; 3) 40 seconds; 4) 120 seconds; 5) 60 seconds; 6) 30 steps.

Why Is This Topic Important?

  • Rates idea Combining speeds and rates is a core skill.
  • Exam use Escalator problems appear in SSC CGL and CAT.
  • Link Same method as boats and streams.
  • Reasoning Counting steps trains equation setting.

What Comes Next?

The next topic is Speed Problems Involving Stoppage Time per Hour, which treats stoppages as lost time in each hour.

Key Terms and Formulas

  • Effective speed Speed relative to the ground
  • Escalator speed Speed of the moving staircase
  • Visible steps Number of steps seen at any moment
  • Walkway A flat moving belt
  • Combined rate Sum of the individual rates
  • Reciprocal rule 1/t = 1/t1 + 1/t2

Exam Corner

Points to Remember

  • With the escalator, speeds add; against, they subtract.
  • Time = length divided by effective speed.
  • Combined time uses 1/t = 1/t1 + 1/t2.
  • The number of visible steps is fixed.
  • Use the same unit for length and speed.

Do Not Confuse With

  • With vs against With adds, against subtracts.
  • Sum of times vs reciprocal rule Times do not add; rates do.
  • Steps taken vs visible steps The steps taken depend on direction; visible steps are fixed.
  • Walkway vs stream They work the same way.

Memory Hook

Add the belt when you go with it, subtract it when you go against it, and add rates, not times.

GS Relevance

Escalator and moving walkway problems in SSC CGL and CAT: effective speed, time taken, and the number of visible steps.

Frequently Asked Questions

How do you find the time on a moving escalator?

Divide the length of the escalator by the effective speed. For a person walking with the escalator, the effective speed is the walking speed plus the escalator speed. For a person walking against it, the effective speed is the walking speed minus the escalator speed.

How do you combine the escalator time and walking time?

Use the reciprocal rule: one over the combined time equals one over the time taken by the escalator alone plus one over the time taken by walking alone. For 40 seconds and 60 seconds, the combined time is 24 seconds.

How do you find the number of visible steps on an escalator?

Let the walking speed be a steps per unit time and the escalator speed e. Going down, the visible steps equal the steps taken times 1 plus e over a, and going up, times 1 minus e over a. Equate the two to solve for N.

What is a moving walkway problem?

A moving walkway problem treats the walkway as a moving surface with its own speed. A person walking with it has an effective speed equal to the sum of the speeds, and against it the difference, exactly as in boats and streams problems.

Can a person move backwards on an escalator?

Yes, if a person walks against an escalator at a speed lower than the escalator's speed, the effective speed is negative and the person is carried backwards. In practice, problems assume the walking speed is greater than the escalator speed when going against it.

PYQ Practice — Statement Analysis

1 A person walking with an escalator has an effective speed equal to the sum of the two speeds.
True

The escalator adds its movement to the person's walking.

2 If escalator alone takes t1 and walking alone takes t2, the combined time is t1 plus t2.
False

The combined time is given by 1/t = 1/t1 + 1/t2.

3 The number of visible steps on an escalator changes with the direction a person walks.
False

The number of visible steps is fixed.

4 An escalator of 30 m at 0.5 m/s carries a standing person in 60 seconds.
True

Time is 30 divided by 0.5.

Share: