Circular Track Motion and Meeting/Crossing Point Problems
Quantitative Aptitude › Time, Speed and Distance · Topic 10.7
On a circular track, two runners starting together meet for the first time after the track length divided by their relative speed. They meet every L/(u + v) when running in opposite directions and every L/(u - v) when running in the same direction.
6 min read · Quantitative Aptitude · Time, Speed and Distance
Quick Answer
On a circular track, two runners starting together meet for the first time after the track length divided by their relative speed. They meet every L/(u + v) when running in opposite directions and every L/(u – v) when running in the same direction.
At a Glance
- Opposite directions Meet every L/(u + v)
- Same direction Meet every L/(u – v)
- Meet at the start LCM of the lap times
- Meeting points, opposite Sum of reduced speed ratio
- Meeting points, same direction Difference of reduced speed ratio
- Gap to close One full lap
Where Does It Fit?
This topic extends Relative Speed – Same Direction and Opposite Direction to a closed loop. The meeting at the start uses the LCM idea from Lowest Common Multiple (LCM) by Division and Prime Factorization Method, and the equal-time lap idea follows from Speed, Distance and Time Basic Relationship and Unit Conversion (km/h to m/s).
When Do Two Runners Meet on a Circular Track?
In short: on a closed track, the gap that must be closed or opened is one full lap, so the meeting time uses the length of the track divided by the relative speed.
| Directions | Relative speed | Time between meetings |
|---|---|---|
| Opposite directions | u + v | L ÷ (u + v) |
| Same direction | u – v | L ÷ (u – v) |
Here L is the length of the track. The faster runner laps the slower one in the same-direction case, so the first meeting needs the faster runner to gain one full lap.
When Do They Meet at the Starting Point, and How Many Meeting Points Are There?
In short: they meet at the start when both have completed whole laps at the same moment, and the number of distinct meeting points depends on the reduced ratio of their speeds.
Rules
- Time to meet again at the start = LCM of the time each takes to complete a lap.
- If the speeds are in the reduced ratio a : b, the number of distinct meeting points is a + b for opposite directions and a – b for the same direction.
- The first meeting after starting together at the same point follows the relative speed formula.
- Laps: a runner who takes 60 s per lap completes 3 laps in 180 s, as in Lowest Common Multiple (LCM) by Division and Prime Factorization Method.
- Reduced ratio: reduce the speed ratio to lowest terms before counting the points.
Solved Examples
Example 1
Question: Two runners start together on a 400 m track at 5 m/s and 3 m/s in opposite directions. When do they first meet?
- Relative speed = 5 + 3 = 8 m/s.
- Time = 400 ÷ 8 = 50 seconds.
Answer: After 50 seconds.
Example 2
Question: The same two runners run in the same direction. When does the faster one first meet the slower one?
- Relative speed = 5 – 3 = 2 m/s.
- Time = 400 ÷ 2 = 200 seconds.
Answer: After 200 seconds.
Example 3
Question: Two runners complete a lap in 60 seconds and 90 seconds. After how long do they meet again at the starting point?
- LCM of 60 and 90 = 180.
Answer: After 180 seconds.
Example 4
Question: On a track of 1.2 km, two cyclists have speeds 6 km/h and 10 km/h. Find the first meeting time in the same direction and in opposite directions.
- Same direction: relative speed = 4 km/h, time = 1.2 ÷ 4 = 0.3 hour = 18 minutes.
- Opposite directions: relative speed = 16 km/h, time = 1.2 ÷ 16 = 0.075 hour = 4.5 minutes.
Answer: 18 minutes in the same direction and 4.5 minutes in opposite directions.
Example 5
Question: Two runners have speeds in the ratio 3 : 2 on a circular track. How many distinct meeting points are there in each case?
- The ratio is already in lowest terms.
- Opposite directions: 3 + 2 = 5 meeting points.
- Same direction: 3 – 2 = 1 meeting point.
Answer: 5 points in opposite directions and 1 point in the same direction.
Shortcuts and Tricks
- The gap to be closed is one full lap, so use L divided by the relative speed.
- For meeting at the start, take the LCM of the individual lap times.
- Reduce the speed ratio to lowest terms before counting meeting points.
- Convert units once, so the track length and speeds match.
- The first meeting point after the start is found from the relative-speed time and the distance each has run.
Common Mistakes
- Using half a lap as the gap when the runners start together.
- Counting meeting points from an unreduced ratio such as 6 : 4.
- Using the sum of speeds for the same-direction case.
- Mixing metres and kilometres.
- Taking the LCM of the speeds instead of the lap times.
Practice Questions
- Track 600 m, speeds 4 and 2 m/s in opposite directions. First meeting?
- Same track and speeds in the same direction. First meeting?
- Laps take 40 s and 60 s. Meet again at the start after?
- Speeds in the ratio 5 : 3. Meeting points in opposite and same directions?
- Track 300 m, speeds 12 and 8 km/h, same direction. First meeting?
- Track 450 m, speeds 9 and 6 m/s in opposite directions. First meeting?
Answers: 1) 100 seconds; 2) 300 seconds; 3) 120 seconds; 4) 8 and 2; 5) 270 seconds; 6) 30 seconds.
Why Is This Topic Important?
- Variety Circular tracks add a loop to ordinary relative speed.
- Exam use Appears in SSC CGL and CAT.
- Link Uses the LCM idea from Lowest Common Multiple (LCM) by Division and Prime Factorization Method.
- Reasoning Counting meeting points tests ratio thinking.
What Comes Next?
The next topic is Problems on Escalators and Moving Walkways, where movement happens on a moving escalator or walkway.
Key Terms and Formulas
- Circular track A closed track on which runners go round
- Lap One full round of the track
- Meeting point A place where two runners are together
- Relative speed Sum or difference of the speeds
- LCM Least common multiple of the lap times
- Reduced ratio Speed ratio in lowest terms
Related Topics
- Races and Games of Skill (Head Start Distance/Time, Dead Heat)
- Problems on Escalators and Moving Walkways
- Speed, Distance and Time Basic Relationship and Unit Conversion (km/h to m/s)
- Average Speed for Multi-Stage Journeys
Exam Corner
Points to Remember
- Opposite directions: first meeting after L/(u + v).
- Same direction: first meeting after L/(u – v).
- Meeting at the start: LCM of lap times.
- Meeting points: a + b for opposite directions and a – b for the same direction, using the reduced ratio.
- Use a common unit for length and speed.
Do Not Confuse With
- Meeting anywhere vs at the start Meeting anywhere uses relative speed; at the start uses the LCM.
- Sum vs difference Opposite adds speeds, same direction subtracts.
- Reduced vs unreduced ratio Always reduce before counting meeting points.
- One lap vs half lap The gap to close is one lap when starting together.
Memory Hook
Close a full lap with the relative speed; meet at the start on the LCM of the lap times.
GS Relevance
Frequently Asked Questions
How long do two runners take to meet on a circular track?
If two runners start together and run in opposite directions, they first meet after the track length divided by the sum of their speeds. In the same direction, they first meet after the track length divided by the difference of their speeds, because the faster runner must gain one full lap.
When do two runners meet at the starting point?
Two runners meet at the starting point after a time equal to the least common multiple of the times each takes to complete one lap. If one runner takes 60 seconds and the other 90 seconds per lap, they meet again at the start after 180 seconds.
How many meeting points are there on a circular track?
If the speeds are in the reduced ratio a to b, there are a plus b distinct meeting points when the runners go in opposite directions and a minus b when they go in the same direction. For a ratio of 3 to 2, there are 5 and 1 points.
Why is the gap one full lap in the same direction?
In the same direction, the faster runner meets the slower one only after gaining one full lap on a closed track, so the distance to be closed is the whole track length. The time is then the track length divided by the difference of the speeds.
Why must the ratio be reduced before counting meeting points?
The speed ratio must be in lowest terms because an unreduced ratio such as 6 to 4 would wrongly suggest more distinct meeting points. The true number of points depends only on the coprime numbers a and b in the ratio, as in 3 to 2.
PYQ Practice — Statement Analysis
1 Two runners on a 400 m track at 5 and 3 m/s in opposite directions first meet after 50 seconds.
The relative speed is 8 m/s and 400 divided by 8 equals 50.
2 Two runners meet at the starting point after the sum of their lap times.
They meet after the least common multiple of their lap times.
3 For speeds in the ratio 3 : 2 in opposite directions there are 5 meeting points.
The number is 3 plus 2.
4 In the same direction, the first meeting needs the faster runner to gain half a lap.
The faster runner must gain one full lap.
Related Topics
Browse the full Quantitative Aptitude index