Data Sufficiency Problems Based on Geometry and Mensuration
Quantitative Aptitude › Data Sufficiency · Topic 26.3
Data sufficiency on geometry and mensuration asks whether given measurements fix a length, an area or a volume. Each formula needs particular measurements, so the task is to check that the statements supply them, using relations such as circumference to radius and surface area to edge.
7 min read · Quantitative Aptitude · Data Sufficiency
Quick Answer
Data sufficiency on geometry and mensuration asks whether given measurements fix a length, an area or a volume. Each formula needs particular measurements, so the task is to check that the statements supply them, using relations such as circumference to radius and surface area to edge.
At a Glance
- Circle One of radius, diameter, circumference or area fixes all
- Cube One edge, diagonal or surface area fixes all
- Rectangle Needs two independent measures
- Triangle area Needs base and height
- Trap A figure may hide extra freedom
- Format Two statements, five options
Where Does It Fit?
This topic follows Data Sufficiency Problems Based on Arithmetic Topics (Percentage, Profit-Loss, Interest) and uses the formulas of Area and Perimeter of Square, Rectangle and Parallelogram and Volume and Surface Area of Cube and Cuboid, and the circle facts of Area and Circumference of Circle, Sector and Segment. The next topic, Data Sufficiency Problems Based on Number System, Ratios and Algebra, turns to number system, ratio and algebra.
Which Measurements Fix a Shape?
In short: some shapes are fixed by a single measurement, and others need two or more. Knowing this tells you at once whether a statement is sufficient.
| Shape | Measurements that fix it | Example |
|---|---|---|
| Circle | Any one of radius, diameter, circumference or area | Circumference 44 gives radius 7 (with pi = 22/7) |
| Square | Side, diagonal, perimeter or area | Diagonal 10 gives area 50 |
| Cube | Edge, diagonal or total surface area | Surface area 150 gives edge 5 and volume 125 |
| Rectangle | Two independent measures, such as length and breadth | Diagonal alone is not enough |
| Right triangle | Two sides, or one side and one acute angle | Hypotenuse 10 and angle 30 degrees |
| Sphere | Radius, diameter, surface area or volume | Surface area 616 gives radius 7 |
- One measure enough: shapes with a single size parameter, such as a circle, square, cube and sphere, are fixed by one measurement.
- Two measures needed: shapes such as a rectangle, cylinder and cone have two size parameters.
- Conversions: a measure such as circumference leads to the radius, and from the radius you can find the area.
How Do You Convert One Measure Into Another?
In short: work out whether Statement I can be turned into the radius, edge or side. If so, everything else follows.
Conversions to remember
- Circle: circumference = 2 × pi × r, so r = circumference / (2 × pi). With pi = 22/7, circumference 44 gives r = 7.
- Circle: area = pi × r squared. Area 154 gives r squared = 49, so r = 7.
- Square: diagonal = side × the square root of 2, so area = diagonal squared / 2.
- Cube: total surface area = 6 × edge squared, so surface area 150 gives edge 5.
- Sphere: surface area = 4 × pi × r squared. Surface area 616 gives r = 7.
- Rectangle diagonal: sides 6 and 8 give a diagonal of 10, since 6 squared plus 8 squared is 100.
- Triangle area: base and height together give half of their product. One of them alone does not.
What Traps Appear in Geometry Sufficiency?
In short: the traps are shapes with two size parameters, statements that only give a range, and statements that repeat each other.
- Two parameters: a rectangle’s area cannot be found from a diagonal alone.
- Range statements: a statement such as the diameter is greater than 10 gives no single value.
- Repeated information: a rhombus with side 10 and perimeter 40 gives the same fact twice. The angle or a diagonal is still missing.
- Linked topics: see Data Sufficiency Involving Geometric Figures with Unstated or Missing Measurements for figures with missing measurements.
Solved Examples
Example 1
Question: What is the area of a circle? I: Its circumference is 44 cm. II: Its diameter is greater than 10 cm. (Use pi = 22/7.)
- Statement I: r = 44 / (2 × 22/7) = 7, so area = 22/7 × 49 = 154. Sufficient.
- Statement II gives only a range. Not sufficient.
Answer: A.
Example 2
Question: What is the volume of a cube? I: Its total surface area is 150 cm squared. II: Its edge is a whole number.
- Statement I: 6 × a squared = 150, so a squared = 25 and a = 5. Volume = 125. Sufficient.
- Statement II alone gives no value.
Answer: A.
Example 3
Question: What is the area of a triangle? I: The base is 10 cm. II: The height is 6 cm.
- Statement I alone gives the base only. Not sufficient.
- Statement II alone gives the height only. Not sufficient.
- Together, area = 1/2 × 10 × 6 = 30 square cm.
Answer: C.
Example 4
Question: What is the radius of a circle? I: Its area is 154 square cm. II: Its circumference is 44 cm. (Use pi = 22/7.)
- Statement I: pi × r squared = 154, so r squared = 49 and r = 7.
- Statement II: 2 × pi × r = 44, so r = 7.
Answer: D.
Example 5
Question: What is the length of the diagonal of a rectangle? I: The sides are 6 cm and 8 cm. II: The area is 48 square cm.
- Statement I: diagonal = the square root of (36 + 64) = 10. Sufficient.
- Statement II: area 48 fits many pairs of sides, such as 6 by 8 and 4 by 12. Not sufficient.
Answer: A.
Shortcuts and Tricks
- First count how many size parameters the shape has. One parameter shapes are fixed by one measure.
- Convert the given measure to the radius, edge or side.
- Remember that area and perimeter together fix the sides of a rectangle as a pair, but either one alone does not.
- Use right-triangle triples such as 3, 4, 5 and 6, 8, 10 to check quickly.
- A range or inequality statement is almost never sufficient.
Common Mistakes
- Assuming one measure fixes a rectangle.
- Using a statement that gives only a range.
- Forgetting that area 48 allows many rectangles.
- Treating perimeter and side as separate information for a square.
- Computing the full area when a unique radius is already visible.
Practice Questions
- What is the perimeter of a square? I: Its area is 64. II: Its diagonal is 8 times the square root of 2.
- What is the volume of a cylinder? I: Its radius is 7. II: Its height is 10.
- What is the area of a rhombus? I: Its side is 10. II: Its perimeter is 40.
- What is the curved surface area of a cone? I: The slant height is 10. II: The radius is 7.
- What is the volume of a sphere? I: Its surface area is 616 square cm. II: Its diameter is an even number.
- Is a triangle right-angled? I: Its sides are 3, 4 and 5. II: Its perimeter is 12.
Answers: 1) D; 2) C; 3) E; 4) C (220 with pi = 22/7); 5) A; 6) A.
Why Is This Topic Important?
- Pattern Geometry sufficiency is common in quantitative papers.
- Formulas It uses the formulas of Area and Perimeter of Square, Rectangle and Parallelogram and Volume and Surface Area of Cube and Cuboid.
- Speed Counting parameters avoids long calculations.
- Link Figure-based traps are extended in Data Sufficiency Involving Geometric Figures with Unstated or Missing Measurements.
What Comes Next?
The next topic is Data Sufficiency Problems Based on Number System, Ratios and Algebra. It applies sufficiency thinking to number system, ratio and algebra problems.
Key Terms and Formulas
- Parameter A measurement that fixes the size of a shape
- Circumference The length around a circle
- Surface area The total area of the faces of a solid
- Diagonal A line joining opposite corners
- Edge A line where two faces of a solid meet
- Slant height The length along the side of a cone
Related Topics
- Data Sufficiency Problems Based on Arithmetic Topics (Percentage, Profit-Loss, Interest)
- Data Sufficiency Problems Based on Number System, Ratios and Algebra
- Data Sufficiency – Two-Statement Format (Statement I and Statement II)
- Data Sufficiency Problems Requiring Combination of Both Statements
Exam Corner
Points to Remember
- One-parameter shapes are fixed by one measure.
- A rectangle needs two independent measures.
- Convert the measure to the radius, edge or side.
- A range is not sufficient.
- Repeated information adds nothing.
Do Not Confuse With
- Area vs perimeter Area is surface and perimeter is boundary length.
- Diameter vs radius The diameter is twice the radius.
- Rhombus vs square A rhombus with equal sides needs an angle or diagonal.
- Surface area vs volume Surface area is in square units and volume in cubic units.
Memory Hook
Count the parameters, then check the statements.
GS Relevance
Frequently Asked Questions
Which measurements fix a circle in data sufficiency?
Any single one of the radius, diameter, circumference or area fixes a circle completely, because each can be converted into the radius. A circumference of 44 cm, for example, gives a radius of 7 cm with pi equal to 22 over 7, and then the area follows.
Why is the diagonal alone not enough for a rectangle?
The diagonal alone is not enough for a rectangle because a rectangle has two independent size parameters, length and breadth. Many pairs of sides give the same diagonal, so the area cannot be fixed unless one more measure, such as a side or the area, is also given.
How does surface area fix a cube?
The total surface area of a cube equals six times the square of its edge, so a given surface area fixes the edge and the volume. A surface area of 150 square cm gives an edge of 5 cm and a volume of 125 cubic cm.
What is a common trap in geometry sufficiency questions?
A common trap is assuming that one measurement fixes a shape that has two size parameters, such as a rectangle, a cylinder or a cone. Another trap is a statement that gives only a range, such as a diameter greater than 10, which cannot fix any single value.
How do you start a mensuration sufficiency question?
A mensuration sufficiency question should start by counting the size parameters of the shape and recalling its formulas. Then each statement is converted into the radius, edge or side if possible, which shows quickly whether it fixes the area or volume.
PYQ Practice — Statement Analysis
1 The circumference of a circle alone is enough to find its area.
The circumference gives the radius, and the area follows.
2 The diagonal of a rectangle alone is enough to find its area.
Many rectangles share the same diagonal.
3 A cube with a total surface area of 150 square cm has an edge of 5 cm.
6 × 25 = 150.
4 A statement that the diameter is greater than 10 fixes the radius.
It gives only a range.
Related Topics
Browse the full Quantitative Aptitude index