Data Sufficiency Problems Based on Arithmetic Topics (Percentage, Profit-Loss, Interest)
Quantitative Aptitude › Data Sufficiency · Topic 26.2
Data sufficiency problems on percentage, profit and loss, and interest ask whether the given statements fix one value for a rate, a price, a profit or an interest amount. Each such quantity needs a specific set of inputs, so the task is to check whether those inputs are present.
7 min read · Quantitative Aptitude · Data Sufficiency
Quick Answer
Data sufficiency problems on percentage, profit and loss, and interest ask whether the given statements fix one value for a rate, a price, a profit or an interest amount. Each such quantity needs a specific set of inputs, so the task is to check whether those inputs are present.
At a Glance
- Profit percent needs Cost price and selling price
- Simple interest needs Principal, rate and time
- Discount percent needs Marked price and selling price
- Percentage needs Part and whole, or a stated percentage
- Key habit List inputs, then check which are given
- Format As in the two-statement topic
Where Does It Fit?
This topic follows Data Sufficiency – Two-Statement Format (Statement I and Statement II) and applies it to arithmetic. The formulas come from Cost Price, Selling Price and Marked Price Relationships, Profit Percentage and Loss Percentage Calculation and Simple Interest Formula-Based Problems, and the next topic, Data Sufficiency Problems Based on Geometry and Mensuration, moves to geometry and mensuration.
What Inputs Does Each Arithmetic Quantity Need?
In short: every quantity depends on a small set of inputs. Check whether the statements supply that set, and you have decided sufficiency.
| Quantity | Inputs needed | Formula |
|---|---|---|
| Profit percent | Cost price and selling price | (SP – CP) / CP × 100 |
| Selling price | Cost price and profit percent, or marked price and discount percent | CP × (1 + p/100) or MP × (1 – d/100) |
| Discount percent | Marked price and selling price | (MP – SP) / MP × 100 |
| Simple interest | Principal, rate and time | P × R × T / 100 |
| Compound interest | Principal, rate, time and compounding period | P(1 + R/100) to the power T, minus P |
| Percentage of a whole | Part and whole, or a percentage statement | Part / Whole × 100 |
- One input is rarely enough: a cost price alone does not fix a profit percent, because the selling price is also needed.
- Percent statements help: a statement such as the new price is 25 per cent more than the old gives a percentage rise directly, without any rupee value.
How Do You Judge Sufficiency in Arithmetic Questions?
In short: write down the quantity asked, list its inputs, and tick off which input each statement supplies.
- Step 1: identify the quantity, such as profit percent.
- Step 2: list the inputs, cost price and selling price.
- Step 3: mark which statement gives which input. If one statement gives both, it is sufficient alone.
- Step 4: if the inputs are split between the statements, the answer is C. If an input is missing from both, the answer is E.
Shortcuts
- A percentage change can be found from a ratio alone. A new value that is 25% more than the old gives a rise of 25% without any other data.
- If a statement gives the answer in a different form, such as a ratio, check whether the question asks for a ratio or a number.
- Compound interest needs a time and a compounding period. A rate and a principal alone do not fix it.
What Traps Appear in Arithmetic Sufficiency?
In short: the traps are statements that look complete but leave out the base, and statements that repeat the same information.
- Missing base: 120 failed does not give a pass percentage unless the total is known.
- Same information: two statements can restate one fact. An SP of Rs 450 and a discount of Rs 50 on an MP of Rs 500 describe the same sale, so the second adds nothing new.
- Inequality statements: a statement such as SP is less than MP does not fix the discount.
- Practice: see Data Sufficiency Problems Requiring Combination of Both Statements for questions where only the combination works.
Solved Examples
Example 1
Question: What is the profit percent on an article? I: Cost price is Rs 400. II: Selling price is Rs 500.
- Statement I gives only the cost price, so it is not sufficient.
- Statement II gives only the selling price, so it is not sufficient.
- Together, profit = 500 – 400 = 100, and profit percent = 100 / 400 × 100 = 25%.
Answer: C.
Example 2
Question: What is the simple interest earned? I: Principal is Rs 5,000 and rate is 8% per annum. II: Time is 3 years.
- Statement I gives principal and rate, but not time.
- Statement II gives time only.
- Together, SI = 5,000 × 8 × 3 / 100 = 1,200.
Answer: C.
Example 3
Question: What is the selling price of an article? I: Cost price is Rs 200 and profit is 20%. II: Marked price is Rs 300 and discount is 20%.
- Statement I: SP = 200 × 1.20 = 240.
- Statement II: SP = 300 × 0.80 = 240.
Answer: D. Each statement alone gives Rs 240.
Example 4
Question: What percentage of the students passed? I: 180 of 300 students passed. II: 120 students failed.
- Statement I: 180 / 300 = 60%. Sufficient.
- Statement II: 120 failed, but the total is not given. Not sufficient.
Answer: A.
Example 5
Question: By what percent was the price increased? I: The new price is Rs 150. II: The new price is 25% more than the old price.
- Statement I: the old price is not given, so the rise cannot be found.
- Statement II directly gives a rise of 25%.
Answer: B.
Shortcuts and Tricks
- List the inputs for the quantity before reading either statement in detail.
- A percentage statement can fix a percentage answer without any rupee value.
- If a statement gives a ratio and the question asks for a ratio, it can be sufficient.
- Always check whether the base of a percentage is given.
- Check compounding conditions for compound interest.
Common Mistakes
- Treating a cost price alone as enough to find profit percent.
- Forgetting that a pass or fail count needs a total.
- Assuming simple interest when the question says compound.
- Counting two statements that give the same input as independent.
- Calculating the final number, which wastes time.
Practice Questions
- What is the discount percent? I: Marked price is Rs 500. II: Selling price is Rs 450.
- What is the compound interest for 2 years, compounded annually? I: Rate is 10% per annum. II: Principal is Rs 2,000.
- What is the profit? I: Selling price is Rs 600. II: Profit percent is 20%.
- Did the trader make a gain? I: Selling price is 10% above cost price. II: Cost price is Rs 100.
- What is the rate of simple interest per annum? I: Rs 600 interest is earned on Rs 2,500 in 3 years. II: The amount after 3 years is Rs 3,100.
- What is the marked price? I: Selling price after a 10% discount is Rs 270. II: The discount is Rs 30.
Answers: 1) C (10%); 2) C (Rs 420); 3) C (Rs 100); 4) A; 5) A (8%); 6) A (Rs 300).
Why Is This Topic Important?
- Frequency Arithmetic is the most common base for sufficiency questions.
- Formulas It makes you aware of which inputs each formula needs.
- Link It uses Cost Price, Selling Price and Marked Price Relationships, Profit Percentage and Loss Percentage Calculation and Simple Interest Formula-Based Problems.
- Speed Checking inputs is faster than calculating.
What Comes Next?
The next topic is Data Sufficiency Problems Based on Geometry and Mensuration. It applies sufficiency thinking to geometry and mensuration, where figures and formulas decide what is needed.
Key Terms and Formulas
- Cost price The price at which an article is bought
- Selling price The price at which an article is sold
- Marked price The listed price before discount
- Principal The sum on which interest is calculated
- Rate Interest per unit time as a percentage
- Base The value on which a percentage is taken
Related Topics
- Data Sufficiency – Two-Statement Format (Statement I and Statement II)
- Data Sufficiency Problems Based on Geometry and Mensuration
- Data Sufficiency Problems Based on Number System, Ratios and Algebra
- Data Sufficiency Problems Requiring Combination of Both Statements
Exam Corner
Points to Remember
- Profit percent needs both cost price and selling price.
- Simple interest needs principal, rate and time.
- A percentage statement can fix a percentage answer.
- A count without a total does not give a percentage.
- Do not compute the final answer.
Do Not Confuse With
- Profit vs profit percent Profit is in rupees, and profit percent is relative to cost price.
- Discount vs discount percent A discount in rupees does not fix the percent without the marked price.
- Simple vs compound interest Compound interest needs a compounding period.
- Percentage vs count A count needs a total to become a percentage.
Memory Hook
Inputs first, statements second.
GS Relevance
Frequently Asked Questions
What inputs are needed for profit percent in data sufficiency?
Profit percent needs both the cost price and the selling price, because it is the profit divided by the cost price. If one statement gives only the cost price and the other only the selling price, neither is sufficient alone, and the answer is that both together are needed.
How is simple interest judged in data sufficiency?
Simple interest needs the principal, the rate and the time, because it equals principal times rate times time divided by 100. If these three inputs are spread between two statements, neither is sufficient alone, and together they give a single value for the interest.
Can a percentage statement alone give a percentage answer?
A percentage statement alone can give a percentage answer when it states the relation directly. For example, a new price that is 25 per cent more than the old price fixes the rise at 25 per cent without any rupee value, so such a statement can be sufficient by itself.
Why is a count without a total not enough for a percentage?
A count without a total is not enough for a percentage because a percentage compares a part with a whole. Knowing that 120 students failed does not give the pass percentage unless the total number of students is known, so such a statement is not sufficient alone.
How should you start an arithmetic data sufficiency question?
An arithmetic data sufficiency question should start by naming the quantity asked and listing the inputs its formula needs. Then each statement is checked for which inputs it gives, which shows at once whether one statement, both together or neither can fix a unique value.
PYQ Practice — Statement Analysis
1 Cost price alone is enough to find the profit percent.
The selling price is also needed.
2 Simple interest needs principal, rate and time.
The formula is principal times rate times time divided by 100.
3 A new price that is 25 per cent more than the old price gives a rise of 25 per cent.
The percentage is stated directly.
4 A count of failures is enough to find the pass percentage without knowing the total.
The total is needed.
Related Topics
Browse the full Quantitative Aptitude index