Non-Verbal Series Based on Rotation of a Figure by a Fixed Angle
Reasoning › Non-Verbal Reasoning – Series and Analogy · Topic 22.7
A non-verbal series based on rotation of a figure by a fixed angle is a row of figures in which every figure is the previous one turned through the same angle in the same direction. The orientation of figure n is (n - 1) times the angle, measured modulo 360 degrees, and the whole series repeats after 360 divided by gcd(angle, 360) steps.
7 min read · Reasoning · Non-Verbal Reasoning – Series and Analogy
Quick Answer
A non-verbal series based on rotation of a figure by a fixed angle is a row of figures in which every figure is the previous one turned through the same angle in the same direction. The orientation of figure n is (n – 1) times the angle, measured modulo 360 degrees, and the whole series repeats after 360 divided by gcd(angle, 360) steps.
At a Glance
- Orientation of figure n (n – 1) x angle, modulo 360
- Cycle length 360 / gcd(angle, 360) steps
- 90 degrees Repeats after 4 steps
- 45 degrees Repeats after 8 steps
- Direction Clockwise adds, anticlockwise subtracts
- Alternating angles Add each angle in turn
Where Does It Fit?
This topic is the angle-based companion of Figure Series Involving Rotation, Reflection or Shading Pattern Changes. There the turns were simple quarter and half turns; here the angle itself must be deduced, and the total rotation is calculated rather than seen. It follows Non-Verbal Series Involving Progressive Addition or Deletion of Elements in a Figure and closes the series macro before Mirror Image of a Given Figure Along a Vertical or Horizontal Axis starts mirror images.
How Do You Find the Orientation After Many Rotations?
In short: multiply the angle by the number of steps from the first figure and divide by 360; the remainder is the net turn.
Rotation formulas
- Net turn of figure n = (n – 1) x angle, then subtract multiples of 360.
- The figure returns to its first orientation after 360 / gcd(angle, 360) steps.
- Anticlockwise rotation by x equals clockwise rotation by (360 – x).
| Angle per step | gcd with 360 | Steps to repeat |
|---|---|---|
| 30 degrees | 30 | 12 |
| 45 degrees | 45 | 8 |
| 60 degrees | 60 | 6 |
| 90 degrees | 90 | 4 |
| 120 degrees | 120 | 3 |
| 150 degrees | 30 | 12 |
| 180 degrees | 180 | 2 |
Quarter turns are compared in Figure Series Involving Rotation, Reflection or Shading Pattern Changes; this topic extends the idea to every angle.
How Do You Read the Direction a Pointer Faces?
In short: treat the up direction as 0 degrees, add clockwise turns, and map the result to a compass direction.
| Net clockwise turn from up | Direction |
|---|---|
| 0 degrees | Up (north) |
| 45 degrees | Up-right (north-east) |
| 90 degrees | Right (east) |
| 135 degrees | Down-right (south-east) |
| 180 degrees | Down (south) |
| 225 degrees | Down-left (south-west) |
| 270 degrees | Left (west) |
| 315 degrees | Up-left (north-west) |
- For anticlockwise rotation, subtract and add 360 if the answer is negative.
- A rotation of 405 degrees is the same as 45 degrees, because 405 – 360 = 45.
- If the angle changes in a pattern (90, 180, 90, 180), add the angles in order and then reduce modulo 360.
How Do You Deduce the Angle From the Figures?
In short: compare the orientation of figure 1 and figure 2, read the turn as a multiple of 45 or 90 degrees, and check it on figure 3.
- Pick a pointer or marker, such as the tip of an arrow, to read orientation.
- Measure the turn between neighbouring figures using the compass table.
- Check consistency: the turn from figure 2 to 3 should match, or follow a clear pattern.
- Compute the next orientation by adding the angle once more.
- Match the option with that orientation, checking shading and size as well.
When a symmetric figure hides the rotation, rely on a marker. If the series also adds parts, combine this method with Non-Verbal Series Involving Progressive Addition or Deletion of Elements in a Figure.
Solved Examples
Example 1
Question: An arrow points up in figure 1 and turns 135 degrees clockwise in every next figure. Where does it point in figure 4?
- Figure 4 has 3 rotations behind it: 3 x 135 = 405 degrees.
- 405 – 360 = 45 degrees clockwise from up.
Answer: Up-right (north-east).
Example 2
Question: A pointer rotates 60 degrees each step. After how many steps does it first return to its starting position, and which figure shows it?
- gcd(60, 360) = 60, so the cycle is 360 / 60 = 6 steps.
- After 6 steps we are at figure 7.
Answer: After 6 steps, in figure 7.
Example 3
Question: An arrow points up in figure 1 and turns 45 degrees anticlockwise each step. In which direction does it point in figure 5?
- Four rotations: 4 x 45 = 180 degrees anticlockwise.
- A half turn from up points down.
Answer: Down (south).
Example 4
Question: An arrow points up in figure 1. It turns 90 degrees clockwise from figure 1 to 2, 180 degrees from 2 to 3, 90 degrees from 3 to 4 and 180 degrees from 4 to 5. Where does it point in figure 5?
- Total turn: 90 + 180 + 90 + 180 = 540 degrees.
- 540 – 360 = 180 degrees clockwise from up.
Answer: Down (south).
Example 5
Question: A hand turns 150 degrees clockwise each step. After how many steps does it return to its starting orientation?
- gcd(150, 360) = 30.
- Steps = 360 / 30 = 12. Check: 12 x 150 = 1800 = 5 x 360.
Answer: After 12 steps (figure 13 looks like figure 1).
Shortcuts and Tricks
- Use the formula (n – 1) x angle and reduce by 360 rather than drawing each step.
- Memorise the repeat counts: 90 degrees = 4, 60 degrees = 6, 45 degrees = 8, 30 degrees = 12.
- Convert anticlockwise turns to clockwise by subtracting from 360.
- Use a marker on symmetric figures, otherwise you will not see the rotation.
- For alternating angles, add one pair of angles and multiply by the number of pairs.
Common Mistakes
- Using n instead of n – 1 for the number of rotations behind figure n.
- Mixing the direction of turning in the middle of a calculation.
- Not reducing angles larger than 360 before reading the direction.
- Forgetting that a 180 degree turn of a vertical line looks identical to the original.
- Treating 135 degrees as 90 degrees when reading a diagonal direction.
Practice Questions
- An arrow points up and turns 90 degrees clockwise per step. Where does it point in figure 7?
- How many steps does a rotation of 120 degrees per step need to repeat?
- An arrow points up and turns 45 degrees clockwise per step. Where does it point in figure 4?
- An arrow points up and turns 90 degrees anticlockwise per step. Where does it point in figure 2?
- A rotation of 72 degrees is used per step. How many steps are needed to repeat?
- An arrow points up and turns 270 degrees clockwise per step. Where does it point in figure 3?
Answers: 1) down, as 6 x 90 = 540 and 540 – 360 = 180; 2) 3; 3) down-right (south-east), at 135 degrees; 4) left; 5) 5; 6) down, as 2 x 270 = 540 and 540 – 360 = 180.
Why Is This Topic Important?
- Mental arithmetic Angle arithmetic with 360 is quick once the cycle table is known.
- Exam use Rotation series are a regular question in non-verbal reasoning sections.
- Foundation The same angle sense is used in Mirror Image of a Given Figure Along a Vertical or Horizontal Axis for mirror images and in Paper Folding – Predicting the Punched Hole Pattern After Unfolding for folding.
- Accuracy Computing beats visual guessing when angles are not multiples of 90 degrees.
What Comes Next?
The next macro begins with Mirror Image of a Given Figure Along a Vertical or Horizontal Axis. It moves from turning a figure to reflecting it across an axis.
Key Terms and Formulas
- Fixed angle The same turn at each step
- Net turn The total angle after several steps, reduced modulo 360
- Modulo 360 The remainder after dividing by 360 degrees
- Cycle length Steps after which the figure repeats
- gcd The greatest common divisor of two numbers
- Compass directions North, north-east, east and so on
Related Topics
- Non-Verbal Series Involving Progressive Addition or Deletion of Elements in a Figure
- Figure Series – Identifying the Next Figure in a Sequence
- Figure Series Involving Rotation, Reflection or Shading Pattern Changes
- Figure Analogy – Selecting the Figure That Completes the Relationship
Exam Corner
Points to Remember
- Figure n has been turned (n – 1) times.
- Repeat steps = 360 / gcd(angle, 360).
- Anticlockwise x equals clockwise 360 – x.
- 405 degrees equals 45 degrees.
- A marker reveals the rotation of a symmetric figure.
Do Not Confuse With
- n vs n – 1 Figure n has n – 1 turns, because figure 1 has none.
- Clockwise vs anticlockwise They give opposite directions for the same angle.
- Repeat steps vs repeat figure Repeat after 4 steps means figure 5 equals figure 1.
- Rotation vs reflection Rotation turns about the centre; reflection flips across an axis.
Memory Hook
Turns times angle, reduce by 360, read the compass.
GS Relevance
Frequently Asked Questions
How do you solve a series based on rotation by a fixed angle?
Find the angle by comparing the first two figures, using a marker to see orientation. For figure n multiply the angle by n minus 1, subtract multiples of 360 degrees, and read the direction from a compass table, then match it with the options.
What is the formula for the number of steps before a rotation repeats?
The figure returns to its original orientation after 360 divided by the greatest common divisor of the angle and 360. For example, 60 degrees repeats in 6 steps, 150 degrees in 12 steps and 90 degrees in 4 steps.
How do you handle anticlockwise rotation in figure series?
Treat anticlockwise rotation as subtraction from the starting direction, adding 360 degrees if the result is negative. An anticlockwise turn of x degrees equals a clockwise turn of 360 minus x degrees, so you can convert it to the clockwise table.
What if the angle changes at each step?
If the angle follows a pattern such as 90 and 180 alternately, add the angles in order to find the total rotation, then reduce modulo 360. If the angles grow, such as 45, 90, 135, the sum is a multiple of 45 given by the triangular number pattern.
Why does a rotation sometimes look unchanged in a figure series?
A figure with rotational symmetry, such as a plus sign or a square, looks the same after certain turns. A line looks the same after 180 degrees. Use a marker, such as a dot or an arrow tip, to see the true orientation.
PYQ Practice — Statement Analysis
1 A rotation of 90 degrees per step repeats the figure after 4 steps.
360 divided by 90 is 4.
2 Figure n of a rotating series has been turned n times from figure 1.
Figure n has been turned n - 1 times, because figure 1 is the start.
3 An anticlockwise turn of 90 degrees equals a clockwise turn of 270 degrees.
360 - 90 = 270.
4 A rotation of 150 degrees per step repeats after 6 steps.
gcd(150, 360) = 30, so the figure repeats after 12 steps.
Related Topics
Browse the full Reasoning index