Figure Series Involving Rotation, Reflection or Shading Pattern Changes
Reasoning › Non-Verbal Reasoning – Series and Analogy · Topic 22.2
A figure series involving rotation, reflection or shading pattern changes is a sequence in which each figure is the previous one turned by a fixed angle, flipped across an axis, or re-shaded in a fixed order. To solve it, identify which of the three operations is acting on each part of the figure, and apply that operation once more to reach the next figure.
8 min read · Reasoning · Non-Verbal Reasoning – Series and Analogy
Quick Answer
A figure series involving rotation, reflection or shading pattern changes is a sequence in which each figure is the previous one turned by a fixed angle, flipped across an axis, or re-shaded in a fixed order. To solve it, identify which of the three operations is acting on each part of the figure, and apply that operation once more to reach the next figure.
At a Glance
- Rotation unit 90 degrees = one quarter turn
- Clockwise Up to right to down to left
- Reflection Flips left and right, or up and down
- Shading cycle Often moves one quadrant per step
- Two reflections Bring the figure back to the start
- Four quarter turns Bring the figure back to the start
Where Does It Fit?
This topic follows Figure Series – Identifying the Next Figure in a Sequence, which introduced element tracking, and focuses on turning, flipping and shading rules. It leads into Non-Verbal Series Based on Rotation of a Figure by a Fixed Angle, where the fixed rotation angle itself must be worked out from the figures.
How Does Rotation Change a Figure in a Series?
In short: rotation turns a figure about its centre by a fixed angle each step, and the direction (clockwise or anticlockwise) and the angle must both be found.
| Turn | Angle | Arrow that starts pointing up now points |
|---|---|---|
| Quarter turn clockwise | 90 degrees | Right |
| Half turn | 180 degrees | Down |
| Three-quarter turn clockwise | 270 degrees | Left |
| Quarter turn anticlockwise | 90 degrees | Left |
| Eighth turn clockwise | 45 degrees | Up-right |
- A symmetrical figure such as a plus sign looks the same after 90 degrees, so rotation cannot be seen in it. Look at the marked part, such as a dot on one arm.
- A line segment looks the same after 180 degrees, so only a half turn repeats it.
- When the angle grows each step (45, 90, 135 degrees), add the increasing angles to find the total turn from figure 1.
How Do Reflection and Shading Changes Work?
In short: a reflection flips a figure across an axis each step, so the figure alternates between two forms, while a shading pattern usually moves one position per step around the figure.
- Reflection series: a figure flipped left to right each step has only two forms. Figure 1, 3, 5 are the same and figure 2, 4, 6 are the same.
- Shaded quadrant: in a circle split into four quadrants, one is shaded. If it moves clockwise one quadrant per step, the order is top-left, top-right, bottom-right, bottom-left, and it repeats every 4 figures.
- Half-shaded shapes: a shape with its left half shaded turned 90 degrees clockwise has its top half shaded.
- Colour swap: black parts become white and white parts become black each step. Two steps bring the original back.
Cycle length rules
- Quarter-turn rotation repeats every 4 figures.
- Half-turn rotation and any reflection repeat every 2 figures.
- A figure at position n is the same as the figure at position n mod cycle length (use the full cycle when the remainder is 0).
Combining the three operations needs care; for instance a figure turned by 90 degrees and flipped each step has a cycle of 4, the LCM of 4 and 2.
How Do You Solve a Mixed Rotation and Shading Question?
In short: solve the rotation, the reflection and the shading separately, then combine them, and cut the options down after each element.
- Pick a marker, such as the shaded part or a dot, that shows the figure’s orientation.
- Write the marker position for each given figure.
- Find the rule for the marker. If it moves 90 degrees clockwise each step, apply it again.
- Check shading separately and confirm it follows its own rule.
- Match the option that fits both rules.
When the same pattern also needs elements to be added or removed, see Non-Verbal Series Involving Progressive Addition or Deletion of Elements in a Figure.
Solved Examples
Example 1
Question: An arrow points up in figure 1 and turns 90 degrees clockwise in every next figure. Where does it point in figure 6?
- The directions in order are up, right, down, left and then repeat every 4 figures.
- Figure 6 leaves a remainder of 2 when divided by 4, so it matches figure 2.
Answer: The arrow points right.
Example 2
Question: In figure 1 the left half of a circle is shaded. Each step the shading turns 90 degrees clockwise. Which half is shaded in figure 4?
- Left half turned 90 degrees clockwise becomes the top half (figure 2).
- The top half becomes the right half (figure 3).
- The right half becomes the bottom half (figure 4).
Answer: The bottom half is shaded.
Example 3
Question: A flag shape is drawn facing right in figure 1 and is flipped left to right in every next figure. Which way does it face in figure 7?
- Odd figures face right and even figures face left.
- Figure 7 is odd.
Answer: It faces right.
Example 4
Question: A circle has four quadrants. In figure 1 the top-left quadrant is shaded and the shading moves one quadrant clockwise each figure. Which quadrant is shaded in figure 10?
- The order is top-left, top-right, bottom-right, bottom-left, repeating every 4 figures.
- Figure 10 leaves remainder 2 on division by 4, so it matches figure 2.
Answer: The top-right quadrant is shaded.
Example 5
Question: An arrow points up in figure 1 and the turn increases each step: 45 degrees clockwise from figure 1 to 2, 90 degrees from 2 to 3, 135 degrees from 3 to 4. What is the total clockwise turn of figure 4 from figure 1?
- Add the turns: 45 + 90 + 135 = 270.
- A turn of 270 degrees clockwise from up points left.
Answer: The arrow has turned 270 degrees and points left.
Shortcuts and Tricks
- Convert every turn to a multiple of 45 or 90 degrees and divide the total by 360 to see the remainder.
- Use a marker such as a dot on one arm to detect rotation in symmetric figures.
- Two flips cancel out and four quarter turns cancel out, so only the remainder of the step count matters.
- Handle shading before rotation when the options differ in shading, as it has the fewest states.
- For anticlockwise movement, count the same steps backwards through the clockwise order.
Common Mistakes
- Mixing up reflection and rotation. A flip changes left and right, while a rotation of 180 degrees changes both left-right and up-down.
- Forgetting that rotation direction can be anticlockwise.
- Ignoring a mark that shows orientation and seeing the figure as unchanged.
- Adding angles wrongly when the turn increases each step.
- Counting the starting figure as a step. Figure 1 has made zero moves.
Practice Questions
- An arrow points up and turns 90 degrees clockwise per step. Where does it point in figure 9?
- A figure is flipped left to right every step. Is figure 8 the same as figure 1 or its mirror form?
- A quadrant shaded at the top-left moves anticlockwise per step. Which quadrant is shaded in figure 2?
- How many 90 degree clockwise turns bring a figure back to its starting orientation?
- A line turns 45 degrees clockwise each step starting from vertical. What is its angle from vertical in figure 5?
- Black parts turn white and white parts turn black each step. What is a part which is black in figure 1 in figure 5?
Answers: 1) up, since 9 leaves remainder 1 when divided by 4; 2) its mirror form, since even figures are flipped; 3) bottom-left; 4) 4; 5) 180 degrees, so it is vertical again; 6) black.
Why Is This Topic Important?
- Visual stamina It trains you to hold an orientation in mind while a figure turns.
- Exam use Rotation and reflection series appear regularly in SSC, CAPF and railway non-verbal sections.
- Foundation The turning and flipping ideas return in Mirror Image of a Given Figure Along a Vertical or Horizontal Axis and in Paper Folding – Predicting the Punched Hole Pattern After Unfolding.
- Speed Modulo thinking turns a long series into a short cycle.
What Comes Next?
The next topic is Figure Analogy – Selecting the Figure That Completes the Relationship. It moves from rows of figures to pairs of figures where the same relationship must be applied to a new figure.
Key Terms and Formulas
- Clockwise The direction in which clock hands move
- Anticlockwise The direction opposite to clock hands
- Reflection A flip across an axis that reverses the figure
- Quadrant One of the four equal parts of a circle or square
- Marker A mark used to see the orientation of a figure
- Cycle The number of steps after which a figure repeats
Related Topics
- Figure Series – Identifying the Next Figure in a Sequence
- Figure Analogy – Selecting the Figure That Completes the Relationship
- Figure Classification – Identifying the Odd Figure Out
- Grouping of Figures Based on a Common Underlying Pattern
Exam Corner
Points to Remember
- A quarter turn is 90 degrees and four quarter turns make a full turn.
- A reflection has a cycle of 2.
- Use a marker to see rotation in a symmetrical figure.
- Solve rotation, reflection and shading separately.
- Figure n is the same as figure n mod cycle length.
Do Not Confuse With
- Rotation vs reflection Rotation turns the figure around its centre; reflection flips it across an axis.
- 90 vs 180 degrees A 90 degree turn moves up to right; a 180 degree turn moves up to down.
- Clockwise vs anticlockwise The same angle gives opposite positions in the two directions.
- Shading change vs colour swap Shading may move to a new part; a colour swap exchanges black and white in place.
Memory Hook
Mark it, turn it, flip it, shade it: handle one operation at a time.
GS Relevance
Frequently Asked Questions
How do you solve a figure series based on rotation?
Pick a marker in the figure, write its position in each figure, and find the angle and direction of the turn between neighbours. Apply the same turn once more to the last figure, and use the cycle length to handle long series quickly.
What is the difference between rotation and reflection in figure series?
Rotation turns a figure about its centre through a fixed angle, so every part moves round together. Reflection flips the figure across an axis, as in a mirror, so left and right or up and down are exchanged and the figure alternates between two forms.
How many steps does a 90 degree rotation take to repeat?
A 90 degree rotation repeats after four steps, because four quarter turns make 360 degrees. A 180 degree turn repeats after two steps, and a 45 degree turn repeats after eight steps, so the cycle length is 360 divided by the angle.
How do you handle a shading series in a circle with four quadrants?
Note which quadrant is shaded in each figure and the direction of movement, usually one quadrant per step. The shaded quadrant then repeats every four figures, so figure n matches figure n modulo 4, and you can read off the answer directly.
Why does a symmetric figure seem not to rotate in a series?
A symmetric figure such as a plus sign or a circle looks the same after some turns, so rotation hides. Look for a small marker such as a dot, shaded part or letter on the figure, which shows the real orientation after each step.
PYQ Practice — Statement Analysis
1 A figure that is flipped left to right each step returns to its original form after 2 steps.
Two flips cancel out, so the cycle length is 2.
2 A 45 degree clockwise turn each step repeats the orientation after 4 steps.
360 divided by 45 is 8, so the figure repeats after 8 steps.
3 A left half shaded circle, turned 90 degrees clockwise, has its top half shaded.
The left side moves to the top under a clockwise quarter turn.
4 A plus sign always shows rotation clearly in a figure series.
A plus sign looks the same after every 90 degree turn, so a marker is needed.
Related Topics
Browse the full Reasoning index