Properties of a Cyclic Trapezium
Quantitative Aptitude › Geometry – Quadrilaterals and Polygons · Topic 17.8
A cyclic trapezium is a trapezium whose four vertices lie on a circle, and it must be isosceles. Its legs are equal, its diagonals are equal, its base angles are equal, and its opposite angles are supplementary.
5 min read · Quantitative Aptitude · Geometry – Quadrilaterals and Polygons
Quick Answer
A cyclic trapezium is a trapezium whose four vertices lie on a circle, and it must be isosceles. Its legs are equal, its diagonals are equal, its base angles are equal, and its opposite angles are supplementary.
At a Glance
- Cyclic trapezium Always isosceles
- Legs Equal
- Diagonals Equal
- Base angles Equal
- Diagonal formula d² = c² + ab
- Opposite angles Add up to 180°
Where Does It Fit?
This topic combines Cyclic Quadrilateral Properties on cyclic quadrilaterals with Properties of Square, Rectangle, Parallelogram, Rhombus and Trapezium on the trapezium. The area formula appears again in Area and Perimeter of Trapezium and Rhombus.
Why Must a Cyclic Trapezium Be Isosceles?
In short: in a trapezium the two angles on the same leg add to 180°, and in a cyclic quadrilateral opposite angles also add to 180°. Both hold together only if the two base angles are equal, which makes the legs equal.
Cyclic trapezium facts
- Legs are equal: AD = BC.
- Diagonals are equal: AC = BD.
- Base angles are equal: angle A = angle B and angle C = angle D.
- Opposite angles are supplementary: A + C = 180°.
- The parallel sides are a and b, the legs c, and the diagonal d satisfies d² = c² + ab (Ptolemy’s theorem).
How Do You Find Height, Area and Diagonal?
In short: drop perpendiculars from the ends of the shorter base. The legs form two equal right triangles whose bases are each half the difference of the parallel sides.
| a | b | Leg c | Height h | Area | Diagonal d² |
|---|---|---|---|---|---|
| 18 | 8 | 13 | 12 | 156 | 313 |
| 16 | 6 | 13 | 12 | 132 | 265 |
| 14 | 6 | 5 | 3 | 30 | 109 |
- Height: h = √(c² – ((a – b)/2)²).
- Area: (a + b)/2 × h.
- Diagonal: d = √(c² + ab).
- Angles: if the base angles are x, the other two are 180° – x.
How Do You Recognise and Use a Cyclic Trapezium in Problems?
In short: the words cyclic or inscribed in a circle, together with parallel sides, tell you the trapezium is isosceles.
- Clue words: inscribed in a circle, cyclic, equal diagonals, or equal legs all point to the same figure.
- Angle chase: label the base angles x and the other two 180° – x, then use the given angle.
- Length chase: mark half the difference of the bases at each end of the shorter base to get a right triangle.
- Circle link: the circumradius follows from any three vertices using the triangle formula in Circles Inscribed in and Circumscribed About Triangles and Regular Polygons.
- Sanity check: the diagonal must be longer than the leg and longer than the height.
Solved Examples
Example 1
Question: ABCD is a cyclic trapezium with AB = 18, CD = 8 and legs of 13. Find the height and the area.
- Half the difference of the parallel sides = (18 – 8)/2 = 5.
- h = √(169 – 25) = 12.
- Area = (18 + 8)/2 × 12 = 13 × 12.
Answer: Height 12; area 156.
Example 2
Question: For the same trapezium, find the square of the diagonal.
- d² = c² + ab.
- = 169 + 18 × 8 = 169 + 144.
Answer: d² = 313, so d is about 17.69.
Example 3
Question: In a cyclic trapezium ABCD with AB parallel to CD, angle A = 70°. Find the other angles.
- Base angles are equal: angle B = 70°.
- Opposite angles add to 180°: angle C = 110° and angle D = 110°.
Answer: B = 70°, C = D = 110°.
Example 4
Question: The parallel sides of a cyclic trapezium are 14 and 6 and its legs are 5. Find the area.
- Half difference = 4.
- h = √(25 – 16) = 3.
- Area = (14 + 6)/2 × 3.
Answer: 30.
Shortcuts and Tricks
- If a trapezium is stated to be cyclic, write that its legs and diagonals are equal at once.
- The two corner right triangles have base (a – b)/2.
- Use d² = c² + ab for the diagonal without finding the height.
- Angles come in pairs: x, x, 180° – x, 180° – x.
- Triples such as 5-12-13 and 3-4-5 give clean heights.
Common Mistakes
- Using the full difference of the parallel sides in the corner triangle instead of half.
- Assuming every trapezium is cyclic.
- Forgetting that base angles are equal only in an isosceles trapezium.
- Using c² – ab for the diagonal formula.
- Mixing up the leg and the diagonal.
Practice Questions
- A cyclic trapezium has parallel sides 20 and 10 and legs 13. Find the height.
- Find the area of the trapezium in the previous question.
- For parallel sides 16 and 6 and legs 13, find d².
- The base angles of a cyclic trapezium are 80°. Find the other two angles.
- Is a trapezium with unequal legs cyclic?
Answers: 1) 12; 2) 180; 3) 265; 4) 100° each; 5) no.
Why Is This Topic Important?
- Foundation It joins circle rules with the trapezium.
- Exam use Equal-diagonal and angle questions appear in SSC CGL.
- Speed The d² = c² + ab formula needs no height.
- Link Prepares area work in Area and Perimeter of Trapezium and Rhombus.
What Comes Next?
The next topic is Number of Triangles/Diagonals Formed in a Polygon with n Sides, which counts the triangles and diagonals formed by the vertices of a polygon.
Key Terms and Formulas
- Cyclic trapezium Trapezium with all vertices on a circle
- Isosceles trapezium Trapezium with equal legs
- Base angles Angles at the ends of a parallel side
- Legs The non-parallel sides
- Median Segment joining the midpoints of the legs
- Height Perpendicular distance between the parallel sides
Related Topics
- Area of a Quadrilateral Using Its Diagonals and the Angle Between Them
- Number of Triangles/Diagonals Formed in a Polygon with n Sides
- Properties of Square, Rectangle, Parallelogram, Rhombus and Trapezium
- Properties of Regular and Irregular Polygons
Exam Corner
Points to Remember
- A cyclic trapezium is isosceles.
- Its diagonals are equal.
- d² = c² + ab.
- Base angles are equal.
- Opposite angles add to 180°.
Do Not Confuse With
- Cyclic vs any trapezium Only an isosceles trapezium is cyclic.
- Legs vs diagonals Both are equal in a cyclic trapezium.
- Half vs full difference The corner triangle uses half the difference.
- Base vs opposite angles Base angles are equal; opposite angles are supplementary.
Memory Hook
Cyclic trapezium means isosceles, with equal legs and equal diagonals.
GS Relevance
Frequently Asked Questions
Why is a cyclic trapezium isosceles?
A cyclic trapezium is isosceles because opposite angles of a cyclic quadrilateral add up to 180 degrees, while angles on the same leg of a trapezium also add to 180 degrees. These conditions force the two base angles to be equal, so the legs are equal.
What is the diagonal formula for a cyclic trapezium?
For a cyclic trapezium with parallel sides a and b and equal legs c, the square of each diagonal equals c squared plus a times b, by Ptolemy's theorem. For a equal to 18, b equal to 8 and c equal to 13, the square of the diagonal is 313.
Are the diagonals of a cyclic trapezium equal?
The diagonals of a cyclic trapezium are equal in length, because it is an isosceles trapezium and the triangles formed on the base by the diagonals are congruent. This is one of the quickest ways to recognise the figure in a problem.
How do you find the area of a cyclic trapezium?
Find the height by using half the difference of the parallel sides and the leg in a right triangle, then multiply half the sum of the parallel sides by the height. For parallel sides 18 and 8 and legs 13, the area is 156.
What are the angles of a cyclic trapezium?
A cyclic trapezium has equal base angles at each parallel side, and the angles at the two bases add up to 180 degrees. If one base angle is 70 degrees, the other base angles are 110 degrees.
PYQ Practice — Statement Analysis
1 A cyclic trapezium is always isosceles.
Supplementary opposite angles force equal base angles.
2 The diagonals of a cyclic trapezium are unequal.
They are equal.
3 In a cyclic trapezium d² = c² + ab.
By Ptolemy's theorem.
4 A cyclic trapezium with one base angle of 70° has the other base angles equal to 110°.
Angles on the same leg add to 180°.
Related Topics
Browse the full Quantitative Aptitude index