Area of a Quadrilateral Using Its Diagonals and the Angle Between Them
Quantitative Aptitude › Geometry – Quadrilaterals and Polygons · Topic 17.7
The area of any quadrilateral equals half the product of its diagonals multiplied by the sine of the angle between them. When the diagonals are perpendicular, the area is simply half the product of the diagonals.
5 min read · Quantitative Aptitude · Geometry – Quadrilaterals and Polygons
Quick Answer
The area of any quadrilateral equals half the product of its diagonals multiplied by the sine of the angle between them. When the diagonals are perpendicular, the area is simply half the product of the diagonals.
At a Glance
- General formula (1/2) × d1 × d2 × sin θ
- Perpendicular diagonals (1/2) × d1 × d2
- Rhombus (1/2) × d1 × d2
- Kite (1/2) × d1 × d2
- Angle 30° sin 30° = 1/2
- Angle 60° sin 60° = √3/2
Where Does It Fit?
This topic uses the diagonal ideas of Properties of Square, Rectangle, Parallelogram, Rhombus and Trapezium and Properties of Kite and Cyclic Polygons. The sine value comes from Trigonometric Values of Standard Angles (0°, 30°, 45°, 60°, 90°), and the triangle version is Area of a Triangle Given Three Sides, Two Sides and Included Angle, or Coordinates.
What Is the Diagonal Area Formula?
In short: the two diagonals divide the quadrilateral into four triangles, and the area of the four triangles together is half the product of the diagonals times sin θ.
Area formula
- Area = (1/2) × d1 × d2 × sin θ, where θ is the angle between the diagonals.
- If the diagonals are perpendicular, sin 90° = 1 and the area is (1/2) × d1 × d2.
- This is valid for every convex quadrilateral, and for a parallelogram it gives the same area as base times height.
| θ | sin θ | Area when d1 = 10 and d2 = 12 |
|---|---|---|
| 30° | 1/2 | 30 |
| 45° | √2/2 | 30√2, about 42.43 |
| 60° | √3/2 | 30√3, about 51.96 |
| 90° | 1 | 60 |
Which Figures Use the Perpendicular Case?
In short: any figure whose diagonals cross at right angles can use half the product of the diagonals.
- Rhombus: diagonals are perpendicular bisectors of each other, so the area is (d1 × d2)/2.
- Square: equal perpendicular diagonals d give area d²/2.
- Kite: the diagonals are perpendicular, so the same formula applies.
- Rectangle and general parallelogram: the diagonals are not perpendicular, so use the sine formula.
How Do You Choose the Right Area Method?
In short: use the diagonal formula when diagonals and their angle are known, and use base and height when sides are given.
- Diagonals known: use (1/2) d1 d2 sin θ. For perpendicular diagonals drop the sine.
- Sides and a diagonal known: split the quadrilateral into two triangles and use the triangle area method of Area of a Triangle Given Three Sides, Two Sides and Included Angle, or Coordinates.
- Parallelogram with base and height: use base times height, which equals the diagonal formula.
- Coordinates given: use the polygon area method for coordinates in Area of a Polygon Using the Coordinates of Its Vertices.
- Check: for a square of side a, the diagonal is a√2 and the formula gives (1/2)(a√2)(a√2) = a², which matches.
Solved Examples
Example 1
Question: The diagonals of a quadrilateral are 10 cm and 12 cm and the angle between them is 30°. Find its area.
- Area = (1/2) × 10 × 12 × sin 30°.
- = 60 × 1/2.
Answer: 30 cm².
Example 2
Question: A quadrilateral has perpendicular diagonals 8 cm and 15 cm. Find its area.
- Area = (1/2) × 8 × 15.
Answer: 60 cm².
Example 3
Question: Find the area of a rhombus with diagonals 6 cm and 8 cm.
- Area = (1/2) × 6 × 8.
Answer: 24 cm².
Example 4
Question: The diagonals of a quadrilateral are both 10 cm and they meet at 60°. Find the area.
- Area = (1/2) × 10 × 10 × sin 60°.
- = 50 × √3/2 = 25√3.
Answer: 25√3, about 43.30 cm².
Shortcuts and Tricks
- Check if the diagonals are perpendicular. If yes, skip the sine.
- Remember sin 30° = 1/2, sin 45° = √2/2, sin 60° = √3/2, sin 90° = 1.
- The formula works with either angle between the diagonals, since sin θ = sin (180° – θ).
- For a rhombus, any given side and one diagonal let you find the other from a right triangle.
- Convert units before multiplying.
Common Mistakes
- Forgetting the factor 1/2.
- Using the sine formula with an angle that is not between the diagonals.
- Using sin θ = 1 when the diagonals are not perpendicular.
- Adding the diagonals instead of multiplying.
- Using degrees and radians together.
Practice Questions
- Find the area of a kite with diagonals 14 and 20.
- The diagonals of a quadrilateral are 12 and 18 and meet at 30°. Find the area.
- A square has diagonal 10 cm. Find its area.
- The diagonals of a rhombus are 10 and 24. Find the area.
- Diagonals 9 and 16 meet at 90°. Find the area.
Answers: 1) 140; 2) 54; 3) 50 cm²; 4) 120; 5) 72.
Why Is This Topic Important?
- Foundation A single formula covers every convex quadrilateral.
- Exam use Rhombus and kite areas appear often.
- Speed Diagonals are often easier to find than heights.
- Link It uses the sine values from Trigonometric Values of Standard Angles (0°, 30°, 45°, 60°, 90°).
What Comes Next?
The next topic is Properties of a Cyclic Trapezium, which studies the trapezium that can be inscribed in a circle.
Key Terms and Formulas
- Diagonal Segment joining opposite vertices
- Angle between diagonals Angle at their point of intersection
- Sine Ratio of the opposite side to the hypotenuse
- Perpendicular diagonals Diagonals meeting at 90°
- Convex quadrilateral A quadrilateral with all angles below 180°
- Area Surface enclosed by the figure
Related Topics
- Midpoint Theorem Applied to Quadrilaterals
- Properties of a Cyclic Trapezium
- Properties of Square, Rectangle, Parallelogram, Rhombus and Trapezium
- Properties of Regular and Irregular Polygons
Exam Corner
Points to Remember
- Area = (1/2) × d1 × d2 × sin θ.
- Perpendicular diagonals: area = (1/2) × d1 × d2.
- Rhombus, kite and square use the perpendicular case.
- sin 30° = 1/2 and sin 60° = √3/2.
- The formula works for any convex quadrilateral.
Do Not Confuse With
- Perpendicular vs general diagonals Only the perpendicular case drops the sine.
- Rhombus vs rectangle A rectangle’s diagonals are not perpendicular.
- d1 + d2 vs d1 × d2 The area uses the product.
- θ vs 180° – θ Both give the same sine.
Memory Hook
Half the product of diagonals, times the sine of the angle between them.
GS Relevance
Frequently Asked Questions
What is the area of a quadrilateral using its diagonals?
The area of a quadrilateral equals half the product of its diagonals multiplied by the sine of the angle between them. If the diagonals are perpendicular, the sine is 1 and the area is simply half the product of the diagonals.
What is the area formula for a rhombus using diagonals?
The area of a rhombus equals half the product of its two diagonals, because the diagonals of a rhombus cross at right angles. A rhombus with diagonals 6 and 8 centimetres has an area of 24 square centimetres.
Does the diagonal area formula work for a parallelogram?
The diagonal area formula works for every convex quadrilateral, including a parallelogram, as long as the angle used is the angle between the diagonals. For a rectangle the angle is not 90 degrees unless it is a square.
What is the area of a kite from its diagonals?
The area of a kite equals half the product of its diagonals, because its diagonals are perpendicular and split the kite into four right triangles. For diagonals of 14 and 20 units, the area is 140 square units.
Why does the sine of the angle between diagonals appear?
The sine appears because each of the four triangles formed by the diagonals has area equal to half the product of two segments of the diagonals times the sine of the angle between them. Adding the four areas gives half d1 d2 sine, which is the formula used for every convex quadrilateral.
PYQ Practice — Statement Analysis
1 The area of a quadrilateral with perpendicular diagonals is half the product of the diagonals.
sin 90° = 1.
2 A quadrilateral with diagonals 10 and 12 meeting at 30° has area 60.
The area is 30.
3 The area of a rhombus with diagonals 6 and 8 is 24.
(1/2) × 6 × 8 = 24.
4 The sine formula applies only to rhombuses.
It applies to every convex quadrilateral.
Related Topics
Browse the full Quantitative Aptitude index