Percentage Error in Measurement of Area/Volume
Quantitative Aptitude › Percentage · Topic 4.10
A small percentage error in a measured length causes a larger percentage error in the area or volume computed from it: roughly twice for area and three times for volume. The exact errors follow from multipliers such as (1 + x/100)² and (1 + x/100)³.
6 min read · Quantitative Aptitude · Percentage
Quick Answer
A small percentage error in a measured length causes a larger percentage error in the area or volume computed from it: roughly twice for area and three times for volume. The exact errors follow from multipliers such as (1 + x/100)² and (1 + x/100)³.
At a Glance
- Area error (square or circle) 2x + x²/100 %
- Volume error (cube or sphere) 3x + 3x²/100 + x³/10,000 %
- Small error shortcut Area ≈ 2x, volume ≈ 3x
- Two sides a + b + ab/100
- Method Raise the multiplier to the power
Where Does It Fit?
This topic applies the product formula of Percentage Change in the Product of Two Interdependent Quantities to geometry. It prepares for area and volume work in Area and Perimeter of Triangle (Including Heron’s Formula) and Volume and Surface Area of Cube and Cuboid, and it uses the multiplier method of Successive Percentage Change (Two or More Successive Changes).
How Does an Error in Length Affect Area?
In short: area depends on the square of a length for squares and circles, so the multiplier for area is the square of the multiplier for the length.
Formulas
- If a side or radius has an error of x%, the area error = (1 + x/100)² – 1
- Expanded: area error = 2x + x²/100 per cent
- For a rectangle with errors a% and b%: area error = a + b + ab/100
| Error in side | Area multiplier | Error in area |
|---|---|---|
| +2% | 1.02² = 1.0404 | +4.04% |
| +10% | 1.1² = 1.21 | +21% |
| -3% | 0.97² = 0.9409 | -5.91% |
| +5% | 1.05² = 1.1025 | +10.25% |
| -20% | 0.8² = 0.64 | -36% |
The value of pi stays fixed, so for circles the percentage error in area depends only on the radius error.
How Does an Error in Length Affect Volume?
In short: volume of a cube or sphere depends on the cube of a length, so the volume multiplier is the cube of the length multiplier.
- Cube: an edge error of +1% gives (1.01)³ = 1.030301, a volume error of about 3.03%.
- Edge +2%: (1.02)³ = 1.061208, a volume error of 6.1208%.
- Sphere: volume is proportional to r³, so a radius error of +10% gives (1.1)³ = 1.331, a volume error of 33.1%.
- Cuboid: multiply the three multipliers, as in 1.04 × 0.98 × 1.0 for errors in length and breadth only.
When Can You Use the Approximation 2x and 3x?
In short: for small errors, the extra terms are tiny, so area error is close to twice the length error and volume error is close to three times.
- Example: a 2% error in a side gives about 4% in area. The exact value is 4.04%, so the approximation is close.
- Large errors: for errors of 10% or more, use the exact multiplier, because 2 × 10 = 20 is noticeably different from the true 21%.
- Working backwards: if the area error is 8.16%, the multiplier is 1.0816, so the side multiplier is the square root 1.04, an error of 4%.
- Measurement context: the word “error” can be an excess or a deficit, so keep the sign.
Surface area and volume formulas are collected in Volume and Surface Area of Cube and Cuboid.
Solved Examples
Example 1
Question: The side of a square is measured 2% in excess. Find the percentage error in its area.
- Side multiplier = 1.02.
- Area multiplier = 1.02 × 1.02 = 1.0404.
- Error = 0.0404 = 4.04%.
Answer: 4.04% in excess
Example 2
Question: The radius of a circle is measured 3% short. Find the percentage error in area.
- Radius multiplier = 0.97.
- Area multiplier = 0.97² = 0.9409.
- Error = 0.9409 – 1 = -0.0591.
Answer: 5.91% deficit
Example 3
Question: The length of a rectangle is measured 5% in excess and its breadth 3% in deficit. Find the error in area.
- Multipliers: 1.05 and 0.97.
- 1.05 × 0.97 = 1.0185.
Answer: 1.85% in excess
Example 4
Question: The edge of a cube is measured 1% too large. Find the percentage error in volume.
- Edge multiplier = 1.01.
- Volume multiplier = 1.01³ = 1.030301.
- Error = 3.0301%.
Answer: About 3.03% in excess
Example 5
Question: The error in the area of a square is 8.16%. Find the error in the side.
- Area multiplier = 1.0816.
- Side multiplier = √1.0816 = 1.04.
Answer: 4% in excess
Shortcuts and Tricks
- Square the multiplier for area, and cube it for volume.
- For errors up to 5%, use 2x for area and 3x for volume as a quick check.
- For two different errors, use a + b + ab/100.
- Learn the squares: 1.1² = 1.21, 1.2² = 1.44, 0.9² = 0.81, 0.8² = 0.64.
- Keep the sign: an excess is positive and a deficit is negative.
Common Mistakes
- Doubling the percentage error exactly, which ignores the x²/100 term for larger errors.
- Using the same percentage for area as for the side.
- Forgetting that the radius error appears squared in the area of a circle.
- Treating a deficit as an excess and losing the sign.
- Forgetting that the error in volume is cubed, not squared.
Practice Questions
- A side is measured 10% in excess. Find the error in area.
- A radius is measured 5% in excess. Find the error in area.
- A cube edge is measured 2% in excess. Find the error in volume.
- Length is 4% in excess and breadth 2% in deficit. Find the error in area.
- A radius is measured 20% in deficit. Find the error in area.
- A sphere’s radius is measured 10% in excess. Find the error in volume.
Answers: 1) 21%; 2) 10.25%; 3) 6.1208%; 4) 1.92%; 5) 36% deficit; 6) 33.1%.
Why Is This Topic Important?
- Geometry link It connects percentage to Area and Perimeter of Square, Rectangle and Parallelogram and Volume and Surface Area of Cube and Cuboid.
- Real-life use Measurement error matters in engineering and surveying.
- Product idea It extends Percentage Change in the Product of Two Interdependent Quantities.
- Speed The approximation 2x checks answers fast.
What Comes Next?
The next topic, Combined Percentage and Profit-Loss Problems, combines percentage changes with profit and loss in a single problem.
Key Terms and Formulas
- Percentage error Error divided by true value, times 100
- Excess error Measured value greater than true value
- Deficit error Measured value less than true value
- Edge A side of a cube
- Radius Distance from the centre of a circle or sphere to its boundary
Related Topics
- Consumption-Price Trade-off Problems (Expenditure Held Constant)
- Combined Percentage and Profit-Loss Problems
- Percentage to Fraction and Fraction to Percentage Conversion
- Percentage Increase and Percentage Decrease Calculations
Exam Corner
Points to Remember
- Area error = (1 + x/100)² – 1.
- Volume error = (1 + x/100)³ – 1.
- Small errors: area ≈ 2x, volume ≈ 3x.
- For a rectangle: a + b + ab/100.
- Keep the sign of the error.
Do Not Confuse With
- Side error vs area error The area error is about twice the side error.
- Area vs volume Area uses the square of the multiplier, and volume uses the cube.
- Exact vs approximate 2x is only an approximation; the exact value includes x²/100.
Memory Hook
Square for area, cube for volume.
GS Relevance
Frequently Asked Questions
How do you find the percentage error in area from an error in length?
To find the percentage error in area from an error in length, square the multiplier of the length. A side measured 2 per cent too large has a multiplier of 1.02, and its square is 1.0404, so the percentage error in the area is 4.04 per cent.
What is the formula for percentage error in area?
If a side or radius has a percentage error of x, the percentage error in area is 2x plus x squared over 100. For small errors the area error is close to twice the length error, but for larger errors the extra term must be included.
What is the percentage error in volume of a cube?
The percentage error in the volume of a cube is found by cubing the edge multiplier. An edge measured 1 per cent too large has a multiplier of 1.01, and its cube is 1.030301, so the volume is about 3.03 per cent too large.
How do you find the error in area of a rectangle?
For a rectangle with length error a per cent and breadth error b per cent, the error in area is a plus b plus ab over 100 per cent. A length 5 per cent too large and a breadth 3 per cent too small give 1.85 per cent in excess.
How do you find the error in the side from the error in area?
To find the error in the side from the error in area, take the square root of the area multiplier. An area error of 8.16 per cent gives a multiplier of 1.0816, whose square root is 1.04, so the side error is 4 per cent.
PYQ Practice — Statement Analysis
1 A 10% error in the side of a square causes a 20% error in its area.
The error is 21 per cent, since 1.1 × 1.1 = 1.21.
2 A 2% error in the side of a square causes an error of 4.04% in its area.
1.02 × 1.02 = 1.0404.
3 A 1% error in the edge of a cube causes an error of about 3.03% in its volume.
1.01³ = 1.030301.
4 If the radius of a circle is measured 20% short, the area is 36% short.
0.8 × 0.8 = 0.64.
Related Topics
Browse the full Quantitative Aptitude index