Percentage Increase and Percentage Decrease Calculations
Quantitative Aptitude › Percentage · Topic 4.2
Percentage increase or decrease is the change in a quantity expressed as a percentage of its original value: change divided by original value, multiplied by 100. The original value is always the base.
6 min read · Quantitative Aptitude · Percentage
Quick Answer
Percentage increase or decrease is the change in a quantity expressed as a percentage of its original value: change divided by original value, multiplied by 100. The original value is always the base.
At a Glance
- Percentage change (New – Old)/Old × 100
- Base The original value
- After x% rise Old × (100 + x)/100
- After x% fall Old × (100 – x)/100
- Restore after x% rise Reduce by 100x/(100 + x) %
Where Does It Fit?
This topic follows Percentage to Fraction and Fraction to Percentage Conversion and uses the same base-value idea. Its results feed Successive Percentage Change (Two or More Successive Changes), where two changes are combined, and Profit Percentage and Loss Percentage Calculation, where profit and loss are changes in value.
How Do You Calculate Percentage Increase and Decrease?
In short: subtract the old value from the new value, divide by the old value, and multiply by 100. A positive result is an increase, and a negative result is a decrease.
Formulas
- Percentage change = (New value – Original value)/Original value × 100
- New value after an increase of x% = Original × (100 + x)/100
- New value after a decrease of x% = Original × (100 – x)/100
- Original value = New value × 100/(100 ± x)
- Increase: 80 to 100 gives (100 – 80)/80 × 100 = 25%.
- Decrease: 100 to 80 gives (80 – 100)/100 × 100 = -20%. The percentage decrease is 20%, and the minus sign only shows the direction.
- Not symmetric: an increase of 25% and a decrease of 20% are the same change in opposite directions, because the base differs.
How Do You Find the Original Value or Reverse a Change?
In short: a reverse percentage problem gives the final value and asks for the original, so divide by the multiplier.
| Change | Multiplier | To restore, change by |
|---|---|---|
| Increase 20% | 1.2 | Decrease 16.67% (1/6) |
| Increase 25% | 1.25 | Decrease 20% |
| Increase 50% | 1.5 | Decrease 33.33% |
| Decrease 20% | 0.8 | Increase 25% |
| Decrease 25% | 0.75 | Increase 33.33% |
| Decrease 50% | 0.5 | Increase 100% |
The restoring percentage for a rise of x% is 100x/(100 + x), and for a fall of x% it is 100x/(100 – x). Successive changes of this type are treated fully in Successive Percentage Change (Two or More Successive Changes).
How Do You Compare Two Quantities as “More Than” and “Less Than”?
In short: “A is x% more than B” uses B as the base, and “B is y% less than A” uses A as the base, so x and y are different numbers.
| Statement | Base | Reverse statement |
|---|---|---|
| A is 25% more than B | B | B is 20% less than A |
| A is 50% more than B | B | B is 33.33% less than A |
| A is 20% less than B | B | B is 25% more than A |
| A is 100% more than B | B | B is 50% less than A |
- Quick test: if A = 125 and B = 100, then A is 25% more than B, but B is 25/125 = 20% less than A.
- Exam use: comparison questions on salaries, marks and speeds use this reverse relation.
Solved Examples
Example 1
Question: A salary rises from Rs 40,000 to Rs 45,000. Find the percentage increase.
- Increase = 45,000 – 40,000 = 5,000.
- 5,000/40,000 = 1/8.
- 1/8 = 12.5%.
Answer: 12.5%
Example 2
Question: A number increased by 20% becomes 150. Find the number.
- Multiplier = 1.2.
- Number = 150/1.2 = 125.
Answer: 125
Example 3
Question: A price rises by 25%. By what percentage must it fall to return to the old price?
- 25% = 1/4, so the new price is 5/4 of the old.
- To return, fall by (5/4 – 1)/(5/4) = (1/4)/(5/4) = 1/5.
- 1/5 = 20%.
Answer: 20%
Example 4
Question: After a 15% decrease, a value is 340. Find the original value.
- Multiplier = 0.85.
- Original = 340/0.85 = 400.
Answer: 400
Example 5
Question: A number decreased by 20% and then increased by 25% gives 100. Find the number.
- Multiplier for both steps: 0.8 × 1.25 = 1.
- So the number is 100.
Answer: 100
Shortcuts and Tricks
- Always divide by the old value, never the new value.
- Use fractions: a 12.5% rise is a multiplier of 9/8, a 20% fall is 4/5.
- To undo a rise of 1/n, reduce by 1/(n + 1). To undo a fall of 1/n, increase by 1/(n – 1).
- For reverse problems, divide the final value by the multiplier.
- Check your answer by applying the percentage forward again.
Common Mistakes
- Using the new value as the base. A fall from 300 to 250 is 50/300 = 16.67%, not 50/250.
- Assuming an x% rise and an x% fall cancel. They do not, because the bases differ.
- Subtracting percentages instead of using multipliers in reverse problems.
- Using 100 + x when the quantity fell, or 100 – x when it rose.
- Forgetting to convert the final percentage into the requested form, increase or decrease.
Practice Questions
- Find the percentage change from 250 to 300.
- Find the percentage change from 300 to 250.
- After a 15% decrease a value is 340. Find the original.
- A number increased by 40% is 84. Find the number.
- A quantity falls 20%. By what percentage must it rise to be restored?
- A value rises 10% and the new value is 330. Find the old value.
Answers: 1) 20% increase; 2) 16.67% decrease; 3) 400; 4) 60; 5) 25%; 6) 300.
Why Is This Topic Important?
- Direct use Questions on price, salary and population changes use these formulas.
- Base for later topics Successive Percentage Change (Two or More Successive Changes) and Population Growth and Decline Problems Using Percentage combine several changes.
- Reverse thinking Restoring percentages appear in Consumption-Price Trade-off Problems (Expenditure Held Constant).
- Speed Multipliers reduce each step to one multiplication.
What Comes Next?
The next topic, Successive Percentage Change (Two or More Successive Changes), covers what happens when two or more percentage changes follow one another.
Key Terms and Formulas
- Original value The starting value, used as the base
- Multiplier The factor by which the original is multiplied, such as 1.2 for a 20% rise
- Reverse percentage Finding the original from the final value
- Restoring percentage The change needed to return to the original value
- Percentage change Change divided by original, times 100
Related Topics
- Percentage to Fraction and Fraction to Percentage Conversion
- Successive Percentage Change (Two or More Successive Changes)
- Percentage Change in the Product of Two Interdependent Quantities
- Population Growth and Decline Problems Using Percentage
Exam Corner
Points to Remember
- Change % = (New – Old)/Old × 100.
- A 25% rise is undone by a 20% fall, and a 20% fall by a 25% rise.
- The base is always the original value.
- Original = Final ÷ multiplier.
- Equal rises and falls do not cancel.
Do Not Confuse With
- Increase vs increase of A 20% increase multiplies by 1.2, and an increase of 20 adds 20.
- New vs old base Percentage change uses the old value as the base.
- Restore vs reverse Restoring means returning to the old value after a change.
Memory Hook
Change over old, times 100; to undo a change, divide by the multiplier.
GS Relevance
Frequently Asked Questions
How do you calculate percentage increase?
Percentage increase is calculated by subtracting the old value from the new value, dividing the result by the old value and multiplying by 100. For example, a rise from 80 to 100 is 20 divided by 80, which is 0.25, or a 25 per cent increase.
How do you find the original value after a percentage change?
To find the original value, divide the final value by the multiplier. After a 20 per cent increase the multiplier is 1.2, so a final value of 150 gives an original value of 125. After a 15 per cent decrease the multiplier is 0.85.
If a price rises by 25 per cent, how much must it fall to return to the old price?
A price that rises by 25 per cent must fall by 20 per cent to return to its old value. The new price is five-fourths of the old price, so the fall needed is one-fifth of the new price, which is 20 per cent.
Why is a 20 per cent rise followed by a 20 per cent fall not zero?
A 20 per cent rise followed by a 20 per cent fall is not zero because the two changes use different bases. A value of 100 becomes 120 and then 96, so the net result is a fall of 4 per cent from the original value.
Which base should be used for percentage change?
The base for percentage change is always the original or old value, the quantity before the change. A fall from 300 to 250 is 50 divided by 300, which is 16.67 per cent, not 50 divided by 250, which would give 20 per cent.
PYQ Practice — Statement Analysis
1 A 25% increase followed by a 20% decrease restores the original value.
1.25 × 0.8 = 1.
2 A 20% increase followed by a 20% decrease restores the original value.
1.2 × 0.8 = 0.96, a net fall of 4 per cent.
3 The percentage fall from 300 to 250 is 20%.
It is 50/300 × 100 = 16.67 per cent.
4 If a number rises by 40% to give 84, the number is 60.
84/1.4 = 60.
Related Topics
Browse the full Quantitative Aptitude index