An Initiative by SAARTHI IAS
Maarg Manthan · Topic 8.4

Mixture and Alligation Rule (Rule of Alligation)

Quantitative Aptitude › Average and Mixture/Alligation · Topic 8.4

The rule of alligation finds the ratio in which two ingredients of different prices or strengths must be mixed to get a given mean. The cheaper and dearer quantities are in the ratio (dearer - mean) : (mean - cheaper).

Share:
Mixture and Alligation Rule (Rule of Alligation) - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

The rule of alligation finds the ratio in which two ingredients of different prices or strengths must be mixed to get a given mean. The cheaper and dearer quantities are in the ratio (dearer – mean) : (mean – cheaper).

At a Glance

  • Ratio Cheaper : Dearer = (d – m) : (m – c)
  • m Mean price or concentration
  • c and d Cheaper and dearer values
  • Condition c < m < d
  • Method Cross diagram
  • Works for Price, strength, speed

Where Does It Fit?

This topic turns the weighted average of Weighted Average Calculation into a quick ratio method. It leads into Mixing Two or More Ingredients of Different Prices/Concentrations, Replacement Problems (Repeated Removal and Replacement of a Portion of a Mixture) and Alligation Problems Involving More Than Two Mixtures/Components.

What Is the Rule of Alligation?

In short: when two ingredients with values c (cheaper) and d (dearer) are mixed to get a mean m, the quantities taken are in the ratio (d – m) to (m – c).

Alligation rule

  • (Quantity of cheaper) : (Quantity of dearer) = (d – m) : (m – c)
  • The mean m must lie between c and d.
  • The cross diagram puts c and d on the left, m in the centre, and the differences on the right.

It works because the total of the cheaper part and the dearer part must equal the total value of the mixture, as shown in Weighted Average Calculation.

How Does the Cross Method Work?

Step What to do
1 Write the cheaper value c and the dearer value d on the left.
2 Write the mean m in the middle.
3 Subtract crosswise: d – m is the cheaper quantity; m – c is the dearer quantity.
4 Reduce the numbers to the simplest ratio.

If rice at Rs 40 and Rs 50 per kg is mixed to give Rs 46 per kg, the cheaper : dearer ratio is (50 – 46) : (46 – 40) = 4 : 6 = 2 : 3.

Where Else Can Alligation Be Used?

  • Concentrations: to get 45 per cent from 40 per cent and 60 per cent solutions, the ratio is (60 – 45) : (45 – 40) = 15 : 5 = 3 : 1.
  • Water in milk: water has price 0. To sell milk bought at Rs 60 per litre at Rs 48 per litre, the ratio of water to milk is (60 – 48) : (48 – 0) = 1 : 4.
  • Average speeds: the same method gives the ratio of times, as discussed in Average Speed Problems Linked to Alligation.
  • Profit shortcuts: alligation can find the ratio of goods sold at two profit rates for an overall profit.

Solved Examples

Example 1

Question: In what ratio must rice at Rs 40 per kg be mixed with rice at Rs 50 per kg to get a mixture worth Rs 46 per kg?

  1. Cheaper c = 40, dearer d = 50, mean m = 46.
  2. Cheaper : dearer = (d – m) : (m – c) = (50 – 46) : (46 – 40) = 4 : 6.
  3. Simplify 4 : 6 to 2 : 3.

Answer: 2 : 3

Example 2

Question: A 40 per cent acid solution and a 60 per cent acid solution are mixed to get 45 per cent. Find the ratio of the weaker to the stronger.

  1. c = 40, d = 60, m = 45.
  2. Ratio = (60 – 45) : (45 – 40) = 15 : 5.
  3. Simplify 15 : 5 to 3 : 1.

Answer: 3 : 1

Example 3

Question: Milk worth Rs 60 per litre is mixed with water to be sold at Rs 48 per litre. Find the ratio of water to milk.

  1. Water costs 0, so c = 0, d = 60, m = 48.
  2. Water : milk = (60 – 48) : (48 – 0) = 12 : 48.
  3. Simplify 12 : 48 to 1 : 4.
  4. Check: 4 L milk + 1 L water costs 240, and 240/5 = 48.

Answer: 1 : 4

Example 4

Question: 20 litres of a 30 per cent solution is mixed with 30 litres of a 50 per cent solution. Find the concentration of the mixture.

  1. Pure part in the first = 0.30 × 20 = 6.
  2. Pure part in the second = 0.50 × 30 = 15.
  3. Total pure = 21 in 50 litres, so concentration = 21/50 = 42 per cent.

Answer: 42 per cent

Example 5

Question: Two types of tea at Rs 120 and Rs 150 per kg are mixed in the ratio 3 : 2. Find the mean price per kg.

  1. Total cost = 3 × 120 + 2 × 150 = 360 + 300 = 660.
  2. Total quantity = 5 kg.
  3. Mean price = 660/5 = 132.

Answer: Rs 132 per kg

Shortcuts and Tricks

  • Cross-subtract: dearer minus mean gives the cheaper quantity.
  • Reduce the final ratio to lowest terms.
  • Check the mean lies strictly between the cheaper and dearer values.
  • Treat water as an ingredient of price 0 in milk and water problems.
  • Verify by recomputing the mean price from the ratio.

Common Mistakes

  • Placing the differences on the wrong sides, which swaps the quantities.
  • Using a mean that is not between the two values.
  • Forgetting to simplify the ratio.
  • Using prices of the mixture selling price when the mean cost price is needed.
  • Applying alligation to three ingredients without splitting them into pairs.

Practice Questions

  1. Sugar at Rs 36 and Rs 42 is mixed to get Rs 40. Find the ratio of cheaper to dearer.
  2. In what ratio must a 20 per cent and a 50 per cent solution be mixed to get 30 per cent?
  3. Find the mean price of 2 kg at Rs 30 and 3 kg at Rs 40.
  4. Milk worth Rs 50 per litre is mixed with water to get Rs 40 per litre. Find water : milk.
  5. In what ratio should tea at Rs 100 and Rs 120 be mixed to get Rs 108?

Answers: 1) 1 : 2; 2) 2 : 1 (20 per cent : 50 per cent); 3) Rs 36; 4) 1 : 4; 5) 3 : 2.

Why Is This Topic Important?

  • Speed Alligation solves ratio problems in seconds.
  • Frequency Price and concentration questions appear in every paper.
  • Foundation It underlies Mixing Two or More Ingredients of Different Prices/Concentrations and Alligation Problems Involving More Than Two Mixtures/Components.
  • Breadth It also helps in profit and speed problems.

What Comes Next?

The next topic is Mixing Two or More Ingredients of Different Prices/Concentrations, which applies alligation to mixtures of different prices and concentrations.

Key Terms and Formulas

  • Alligation Method of finding mixing ratios
  • Mean price Price of the mixture per unit
  • Cheaper The lower-valued ingredient
  • Dearer The higher-valued ingredient
  • Concentration Share of pure substance in a solution
  • Cross diagram Layout used to subtract crosswise

Exam Corner

Points to Remember

  • Cheaper : dearer = (d – m) : (m – c).
  • The mean must lie between c and d.
  • Water is an ingredient of price 0.
  • Alligation gives a ratio of quantities, not of values.
  • Check the result by recomputing the mean.

Do Not Confuse With

  • Ratio of quantities vs ratio of values Alligation gives quantities.
  • Cost price vs selling price Use the mean cost price of the mixture.
  • Mean vs average of the two prices They are equal only for equal quantities.
  • d – m vs m – c d – m belongs to the cheaper ingredient.

Memory Hook

Cross and subtract: the far gap is the near quantity.

GS Relevance

Alligation is a favourite in SSC CGL and CAT for prices, milk and water, and percentage concentration.

Frequently Asked Questions

What is the rule of alligation?

The rule of alligation says that when two ingredients of values c and d are mixed to give a mean m, the quantities of the cheaper and dearer are in the ratio (d - m) to (m - c). It is a shortcut for finding mixing ratios without calculating totals.

How do you use the cross method for alligation?

The cross method writes the cheaper and dearer values on the left and the mean in the middle. Subtracting crosswise gives the quantities: the dearer minus the mean belongs to the cheaper ingredient, and the mean minus the cheaper belongs to the dearer ingredient, then the ratio is simplified.

How is alligation applied to milk and water problems?

In milk and water problems, water is treated as an ingredient with price zero. For milk worth Rs 60 per litre sold at Rs 48 per litre, water to milk is (60 minus 48) to (48 minus 0), which is 12 to 48 and simplifies to 1 to 4.

Can alligation be used for concentrations?

Alligation works for concentrations because the pure quantity in a mixture is a weighted average of the strengths. Mixing 40 per cent and 60 per cent solutions to get 45 per cent needs a ratio of (60 minus 45) to (45 minus 40), which is 3 to 1.

What condition must the mean satisfy in alligation?

The mean value in alligation must lie strictly between the cheaper and dearer values. A mean outside this range cannot be obtained by mixing the two ingredients, so such a question has an error. The method also assumes that prices or strengths combine in proportion to the quantities mixed.

PYQ Practice — Statement Analysis

1 In alligation, the mean must lie between the cheaper and the dearer values.
True

A mixture's value cannot be outside the range of its ingredients.

2 Rice at Rs 40 and Rs 50 mixed to Rs 46 per kg needs cheaper : dearer of 3 : 2.
False

The ratio is (50 - 46) : (46 - 40) = 4 : 6 = 2 : 3.

3 The alligation ratio gives the ratio of quantities of the two ingredients.
True

It tells how much of each to take.

4 In a milk and water mixture, water is treated as an ingredient with price zero.
True

Water adds volume but no cost.

Share: