UPSC 1996 Science and Technology Questions with Answers
26 previous year UPSC Prelims questions on Science and Technology in the UPSC 1996 Prelims. Choose an option to see the answer and explanation.
Explanations state facts as of the year each question was asked; words like “recently” refer to that year.
Showing 1–10 of 26 questions
Browse Science and Technology chapters
UPSC 1996Science and Technology · Biotechnology
Q1. Which of the following professional(s) are more likely to run the risk of a permanent change in their cell’s DNA? 1. Researchers using Carbon 14 isotope 2. X-ray technician 3. Coal miner 4. Dyer and painter Select the correct answer by using the codes given below Codes:
Explanation
DNA damage and permanent mutations are likely in professionals exposed to mutagenic agents like radiation, toxic chemicals, or hazardous environments.
Statement 1 is correct: Researchers using Carbon-14 isotopes are exposed to beta radiation from the radioactive isotope. Prolonged exposure can damage DNA and increase the risk of mutations.
Statement 2 is correct: X-ray technicians are at risk due to ionizing radiation, which can break DNA strands and cause chromosomal abnormalities. Protective measures like lead aprons are essential to minimize exposure.
Statement 3 is incorrect: While coal miners are exposed to harmful substances like coal dust and radon gas, these hazards are more strongly linked to respiratory diseases (e.g., black lung disease) and lung cancer, rather than direct, widespread DNA changes. Hence, it may not be included as a primary factor for widespread DNA changes.
Statement 4 is correct: Chemicals found in dyes and paints, such as benzene and lead-based compounds, can be harmful. They can cause cell damage and increase the risk of DNA changes. Long-term exposure is linked to a higher risk of cancer.
UPSC 1996Science and Technology · Physics: Optics and Sound
Q2. Total internal reflection can take place when light travels from:
Explanation
Total internal reflection occurs when light travels from a medium with a higher refractive index to a medium with a lower refractive index, and the angle of incidence exceeds the critical angle. From the given options, total internal reflection can take place when light travels from Diamond to glass. This is because diamond has a higher refractive index than glass, so when light travels from diamond to glass, it can undergo total internal reflection if the angle of incidence is greater than the critical angle.
UPSC 1996Science and Technology · Physics: Electricity and Magnetism
Q3. Assertion (A): Transformer is useful for stepping up or stepping down voltages. Reason (R): Transformer is a device used in D.C. circuits. In the context of the above two statements, which one of the following is correct?
Explanation
Assertion (A) is true: A transformer is designed to change the voltage level of an alternating current (AC) by using electromagnetic induction, either increasing (stepping up) or decreasing (stepping down) the voltage. Reason (R) is false: A transformer only works with alternating current (AC) because it relies on the changing magnetic field created by the alternating current to induce voltage in the secondary coil. It does not function with direct current (DC).
UPSC 1996Science and Technology · Physics: Electricity and Magnetism
Q4. Domestic electrical wiring is basically a:
Explanation
Domestic electrical wiring is primarily a parallel connection, meaning that appliances and devices are connected in parallel to the power supply. This ensures that each device receives the same voltage, and turning one device on or off does not affect the others. Parallel wiring also allows for individual control of appliances and prevents overloading of a single circuit. In a series connection, devices share the same current, and the total resistance adds up, which can cause voltage drops, as seen in old-fashioned Christmas lights where if one bulb fails, the entire string goes out.
UPSC 1996Science and Technology · Physics: Modern Physics
Q5. Consider the following statements: At the present level of technology available in India, solar energy can be conveniently used to: 1. Supply hot water to residential buildings. 2. Supply water for minor irrigation projects. 3. Provide street lighting. 4. Electrify a cluster of villages and small towns. Of these statements
Explanation
The industrial ages gave us the understanding of sunlight as an energy source. India is endowed with vast solar energy potential. About 5,000 trillion kWh per year energy is incident over India’s land area with most parts receiving 4-7 kWh per sqm per day. Solar photovoltaic power can effectively be harnessed providing huge scalability in India.
Statement 1 is correct: Solar water heaters are widely used for residential purposes.
Statement 2 is correct: Solar-powered pumps are increasingly utilized for small-scale irrigation. Governments under PM KUSUM are advocating for proliferation of such pumps.
Statement 3 is correct: Solar street lights are common in both rural and urban areas.
Statement 4 is correct: Solar microgrids and standalone systems can provide electricity to remote villages and small towns.
UPSC 1996Science and Technology · Physics: Space Physics
Q6. Consider the following statements: A person in a spaceship located half way between the earth and the sun will notice that the: (1) The sky is jet black. (2) stars do not twinkle. (3) The temperature outside the spaceship is much higher than that on the surface of the earth. Of these statements:
Explanation
Statement 1 is correct: In space, there is no atmosphere to scatter sunlight, so the sky appears black, even during the day.
Statement 2 is correct: In space, stars appear as steady points of light because there is no atmospheric turbulence to cause them to twinkle, as we observe from Earth.
Statement 3 is correct: Space near the Sun is extremely hot, with temperatures rising significantly when exposed to direct sunlight. The spacecraft would experience extreme temperatures, which is why temperature regulation inside the spacecraft is essential for astronauts.
UPSC 1996Science and Technology · Chemistry: Physical Chemistry
Q7. The alpha particle carries two positive charges. Its mass is very nearly equal to that of:
Explanation
An alpha particle consists of two protons and two neutrons, which is exactly the nucleus of a helium atom (He2+). The mass of an alpha particle is very close to the mass of a helium atom as the mass of electrons is insignificant in comparison with protons and neutrons.
UPSC 1996Science and Technology · Chemistry: Inorganic Chemistry
Q8. Which one of the following elements is alloyed with iron to produce steel which can resist high temperatures and also have high hardness and abrasion resistance?
Explanation
Option (b) is correct: Chromium is added to iron to produce stainless steel and other high-performance alloys. It provides resistance to oxidation and high temperatures while also increasing hardness and abrasion resistance. Chromium’s ability to form a protective oxide layer makes it essential for producing steel that can withstand harsh conditions. Options (a), (c) and (d) are incorrect:
Aluminium is used for lightweight and corrosion-resistant alloys but not for high-temperature or abrasion resistance. Nickel primarily enhances toughness and corrosion resistance but does not directly improve abrasion resistance as much as chromium. Tungsten contributes to high-temperature strength and wear resistance, especially in tool steels, but chromium is the primary alloying element for the application.
UPSC 1996Science and Technology · Chemistry: Inorganic Chemistry
Q9. Which one of the following is not an essential micronutrient for plants?
Explanation
Micronutrients are essential elements required by plants in very small quantities (typically less than 100 mg/ kg of plant dry matter). Despite their minimal requirement, these nutrients play a critical role in various physiological and biochemical processes necessary for plant growth and development. Sodium is not considered an essential micronutrient for most plants. It may play a role in some specific plants, such as C₄ plants, but it is not universally required as a micronutrient. Other important micronutrients are Iron (Fe), Manganese (Mn), Zinc (Zn), Copper (Cu), Boron (B), Molybdenum (Mo), Chlorine (Cl), Nickel (Ni).
UPSC 1996Science and Technology · Chemistry: Organic Chemistry
Q10. The offending substance in the liquor tragedies leading to blindness etc. is:
Explanation
Option (d) is correct: Methyl alcohol (methanol) is a highly toxic substance that is sometimes illegally added to liquor to reduce costs. Once consumed, it metabolizes into formaldehyde and formic acid, causing blindness, organ failure, or death. Symptoms of methanol poisoning include blurred vision, nausea, and seizures. Options (a), (b) and (c) are incorrect:
Ethyl alcohol is commonly known as ethanol, it is the primary component in alcoholic beverages and is safe for consumption in moderate amounts. Amyl alcohol is found in some industrial applications, amyl alcohol is rarely used in adulterated liquor due to its cost and limited availability. Benzyl alcohol is a non-toxic solvent and not associated with blindness in liquor tragedies. It is used in pharmaceuticals and cosmetics.
Answer key for these questions
Q
UPSC year
Correct answer
1
1996
(c) 1, 2 and 4
2
1996
(a) diamond to glass
3
1996
(c) A is true but R is false
4
1996
(b) parallel connection
5
1996
(a) 1, 2, 3 and 4 are correct
6
1996
(d) 1, 2 and 3 are correct
7
1996
(b) an atom of helium
8
1996
(b) Chromium
9
1996
(c) Sodium
10
1996
(d) methyl alcohol
Frequently asked questions
How many previous year UPSC questions are there on Science and Technology?
This page covers 26 previous year UPSC Prelims GS Paper-I questions on Science and Technology in the UPSC 1996 Prelims, asked from 1996 to 2025. Each has the correct answer and an explanation.
How should I use previous year UPSC questions for Prelims?
Attempt each question first, then open the answer and read the explanation for every option. Repeat by chapter, and track which statements UPSC reuses across years. Previous year questions show the exam pattern and difficulty level.
Which years are covered for Science and Technology?
Questions on Science and Technology in the UPSC 1996 Prelims are available for 30 years, from 1996 to 2025. Use the Year filter to practise a single paper.