An Initiative by SAARTHI IAS
Maarg Manthan · Topic 14.9

Arrangements Requiring Multiple Rounds of Elimination from Clues Given Out of Order

Reasoning › Seating Arrangement – Linear and Circular · Topic 14.9

When seating clues are given out of order, you cannot place them in the order printed. Read all clues first, rank them by how much they fix, and work in rounds: place absolute clues, join relative clues into blocks, link blocks that share a person, then use negative clues to decide the last seats. Repeat until every person is placed.

Share:
Arrangements Requiring Multiple Rounds of Elimination from Clues Given Out of Order - Reasoning - MaargX UPSC Maarg Manthan

Quick Answer

When seating clues are given out of order, you cannot place them in the order printed. Read all clues first, rank them by how much they fix, and work in rounds: place absolute clues, join relative clues into blocks, link blocks that share a person, then use negative clues to decide the last seats. Repeat until every person is placed.

At a Glance

  • Problem Printed order of clues is not the solving order
  • Round 1 Absolute clues (fixed seats, ends)
  • Round 2 Relative clues joined into blocks
  • Round 3 Link blocks that share a person
  • Round 4 Negative clues for the last seats
  • Stop When every person has a seat

Where Does It Fit?

This topic closes the seating macro for rows and circles. It uses the blocks of Seating Arrangement with Incomplete/Partial Information Requiring Deduction and the circular rules of Circular Seating Arrangement – All Facing Centre, and prepares double rows in Double Row Seating Arrangement (Two Parallel Rows Facing Each Other).

How Do You Rank Clues When They Are Out of Order?

In short: read every clue first and order them by how much they fix: absolute clues, then clues that name an already placed person, then clues that join two unplaced persons, then negative clues.

Rank Clue type Example Use
1 Absolute R sits at the east end Fixes a seat at once
2 Relative to a placed person Q sits immediate left of R Extends the placed chain
3 Relative between two unplaced persons P sits immediate left of T Builds a block for later
4 Negative S does not sit next to Q Chooses between options

Underline the person named in the most clues. That person is the best anchor in a circle, and an end seat is the best anchor in a row. Do not waste time on clue 1 just because it is first. With clues out of order, linking clues through a shared person is what turns a loose list into a solvable chain.

How Do Rounds of Elimination Work?

In short: each round places or narrows something, and the next round uses the result, until no clue is left unused.

  1. Round 1: place every absolute clue. In a circle, fix the anchor person at seat 0.
  2. Round 2: use clues that mention a placed person to place more persons.
  3. Round 3: link blocks. If one clue gives P, T and another gives T, Q, join them into P, T, Q.
  4. Round 4: test the block in the seats left, and apply negative clues to remove options.
  5. Round 5: check every clue against the finished arrangement, including the ones used early.

Working rules

  • Never leave a clue unused; each one either fixes or removes something.
  • If a round places nobody, go back and re-read the clues for a missed absolute clue.
  • Mark each used clue with a tick so none is forgotten.

When an arrangement is not fully fixed even after all rounds, the result matches the incomplete-information case in Seating Arrangement with Incomplete/Partial Information Requiring Deduction.

How Do You Handle Circles and Rows With Out-of-Order Clues?

In short: the rounds are the same; only the anchor differs: an end seat in a row and a fixed person in a circle.

  • Row: begin with end and exact-position clues, then extend inward.
  • Circle: fix the most-mentioned person at seat 0, then add left (+1) and right (-1) clues in a chain.
  • Chains: a run of immediate-left clues often produces one long chain that fills the circle.
  • Verification: a finished arrangement must satisfy clues in the order printed, even though it was built in another order.

Solved Examples

Example 1

Question: Seven persons A to G sit around a circular table facing the centre. The clues are given in this order: B sits immediate left of E. E sits immediate left of C. F sits between D and C. D sits immediate left of A. G sits immediate right of A. Who sits second to the right of B?

  1. No clue is absolute, but A appears in two clues. Fix A at seat 0.
  2. D is immediate left of A, so D is at seat 1. G is immediate right of A, so G is at seat 6.
  3. F sits between D and C, with D at seat 1, so F is at seat 2 and C is at seat 3.
  4. E is immediate left of C, so E is at seat 4. B is immediate left of E, so B is at seat 5.
  5. Second to the right of B at seat 5 is seat 3.

Answer: C sits second to the right of B. The circle clockwise is A, D, F, C, E, B, G.

Example 2

Question: Six persons A to F sit in a row facing north. The clues are: C sits immediate left of E. A sits at the east end. D sits immediate left of C. B sits immediate left of D. F does not sit next to A. Who sits at the west end?

  1. Round 1: A is at seat 6, the east end.
  2. Round 2: C is immediate left of E, D is immediate left of C and B is immediate left of D. Joining the blocks gives B, D, C, E in that order.
  3. Round 3: the block B, D, C, E fits in seats 1 to 5 with F left over. F must take the remaining seat. F cannot take seat 5, because that is next to A at seat 6. So F takes seat 1 and the block takes seats 2 to 5.

Answer: F sits at the west end. The row is F, B, D, C, E, A.

Example 3

Question: Five persons P, Q, R, S and T sit in a row facing north. The clues are: P sits immediate left of T. Q sits immediate left of R. R sits at the east end. S does not sit next to Q. Who sits in the middle?

  1. Round 1: R is at seat 5. Round 2: Q is at seat 4.
  2. Round 3: P, T needs two adjacent seats among seats 1 to 3, so P and T take seats (1, 2) or (2, 3).
  3. Round 4: S takes the third seat among 1 to 3. S cannot be at seat 3, next to Q at seat 4, so S is at seat 1, P at seat 2 and T at seat 3.

Answer: T sits in the middle. The row is S, P, T, Q, R.

Example 4

Question: Out of the clues in the previous example, which clue should be used first?

  1. “R sits at the east end” is an absolute clue that fixes a seat.
  2. All other clues are relative or negative.

Answer: Start with “R sits at the east end”.

Example 5

Question: Five persons A to E sit around a circular table facing the centre. The clues are: D sits immediate left of C. B sits immediate left of A. E sits immediate left of D. C sits immediate left of B. Who sits immediate right of A?

  1. Fix A at seat 0. B is immediate left of A, so B is at seat 1.
  2. C is immediate left of B, so C is at seat 2. D is at seat 3 and E is at seat 4.
  3. Immediate right of A is seat 4.

Answer: E sits immediate right of A. The circle clockwise is A, B, C, D, E.

Shortcuts and Tricks

  • Read all clues before placing anything, and tick each clue when used.
  • Pick the anchor: an end seat in a row, the most-named person in a circle.
  • Join blocks as soon as two clues share a person.
  • Use negative clues last, unless they are the only way to get started.
  • If you are stuck, re-read for an absolute clue that you passed over.

Common Mistakes

  • Placing clues in the order printed, which leaves early clues dangling.
  • Using a negative clue too early, which allows wrong placements to survive.
  • Leaving a clue unused. Each one must either fix or remove something.
  • Forgetting to verify against every clue at the end.
  • Fixing a person in a circle without checking who is named most often.

Practice Questions

  1. Five persons P to T sit in a row facing north. T is at the west end, R is at the east end, Q sits immediate left of R, and P sits immediate left of Q. Who sits in the middle?
  2. Four persons sit around a table facing the centre. B is immediate left of A, C is immediate left of B and D is immediate left of C. Who sits immediate right of A?
  3. Six persons U, V, W, X, Y and Z sit in a row facing north. W is at the west end, X is third from the west end, Y sits immediate right of X, V sits immediate right of W, and Z sits second to the right of Y. Who sits between Y and Z?
  4. Which kind of clue should you use first in an out-of-order seating puzzle: absolute or relative?
  5. In a circle of 7, B is third to the left of A and C is second to the right of A. How many persons sit between B and C on the shorter arc?

Answers: 1) P; 2) D; 3) U; 4) absolute; 5) 1.

Why Is This Topic Important?

  • Organisation It tests whether you can plan a solving order, not only apply a rule.
  • Exam frequency Almost every long seating set is printed out of order.
  • Speed A good clue ranking can halve solving time.
  • Link The same planning is needed in the puzzle macro, starting at Puzzles Requiring Elimination Method with Partial/Conditional Clues.

What Comes Next?

The next topic is Double Row Seating Arrangement (Two Parallel Rows Facing Each Other). It moves from one row to two parallel rows that face each other.

Key Terms and Formulas

  • Absolute clue A clue that fixes a seat
  • Relative clue A clue that links two persons
  • Negative clue A clue that rules a seat out
  • Anchor The first person or seat placed
  • Block A group with fixed order
  • Round One pass of placing or narrowing

Exam Corner

Points to Remember

  • Read all clues first and rank them.
  • Absolute, then relative to placed, then block, then negative.
  • Tick each clue when used.
  • Join blocks that share a person.
  • Verify against all clues at the end.

Do Not Confuse With

  • Printed order vs solving order The first clue is rarely the first to use.
  • Block vs chain A chain is a long block made by joining blocks.
  • Negative vs absolute A negative clue removes options; an absolute clue fixes one.
  • Anchor in a row vs a circle An end seat in a row; the most-named person in a circle.

Memory Hook

Rank the clues, place the sure ones, chain the blocks, and let the negatives finish.

GS Relevance

Tests organisation under time pressure in IBPS PO mains, SBI PO and CSAT: long clue lists in which the first clue is rarely the one to start with.

Frequently Asked Questions

How do you solve seating arrangement when clues are out of order?

Read all clues first and rank them: absolute clues that fix a seat, then clues that mention a placed person, then clues joining two unplaced persons, then negative clues. Work in rounds, placing and linking blocks, and tick each clue as it is used. Verify the final arrangement against every clue.

Which clue should I start with in a seating puzzle?

Start with an absolute clue, such as a person at an end or at an exact seat, because it fixes a position at once. If there is none, start with the person named in the most clues. In a circle, fix that person at seat 0 and build outward from there.

What are rounds of elimination in seating arrangement?

Rounds are repeated passes through the clues in which each pass places a person or removes options, and the next pass uses the result. Typical rounds are absolute clues, relative clues, linking blocks, and finally negative clues, and you stop when every seat is filled.

How do you link blocks in a seating puzzle?

When two clues share a person, join the two blocks into one longer block. For example, P immediate left of T and T immediate left of Q give the block P, T, Q. Longer blocks have fewer places to fit, so they narrow the arrangement quickly.

Why should negative clues be used last?

A negative clue only removes one option, so it helps most when two or three options remain. Used early it leaves many arrangements open and invites mistakes. After absolute and relative clues have reduced the options, one negative clue usually decides the final seats.

PYQ Practice — Statement Analysis

1 In an out-of-order seating puzzle, the first printed clue must be used first.
False

Clues should be used in order of how much they fix, not in printed order.

2 Two clues that share a person can be joined into one longer block.
True

The shared person links the two blocks.

3 Negative clues are best used at the end of the solving process.
True

They are most useful when only a few options remain.

4 In a circle, the best anchor is the person who is named in the fewest clues.
False

The most-named person gives the most placements.

Share: