Measures of Dispersion – Range, Mean Deviation, Variance and Standard Deviation
Quantitative Aptitude › Statistics · Topic 24.2
Measures of dispersion show how spread out data are around the centre. The range is the largest value minus the smallest, the mean deviation is the average absolute distance from the mean, the variance is the average squared distance from the mean, and the standard deviation is the square root of the variance.
5 min read · Quantitative Aptitude · Statistics
Quick Answer
Measures of dispersion show how spread out data are around the centre. The range is the largest value minus the smallest, the mean deviation is the average absolute distance from the mean, the variance is the average squared distance from the mean, and the standard deviation is the square root of the variance.
At a Glance
- Range Maximum – Minimum
- Mean deviation Average of |x – mean|
- Variance Average of (x – mean)²
- Standard deviation Square root of variance
- Shortcut Variance = mean of squares – square of mean
Where Does It Fit?
This topic follows Measures of Central Tendency – Mean, Median and Mode. Its results are used in Correlation and Coefficient of Variation (CAT-Level), Combined Mean and Combined Standard Deviation of Two or More Groups and Effect on Mean, Median and Mode When a Constant Is Added to or Multiplied with Every Observation.
What Are the Measures of Dispersion?
In short: two data sets can have the same mean but very different spread, so a measure of spread is needed.
| Measure | Formula | Data 2, 4, 4, 4, 5, 5, 7, 9 (mean 5) |
|---|---|---|
| Range | Max – Min | 9 – 2 = 7 |
| Mean deviation | Σ|x – mean| / n | 12/8 = 1.5 |
| Variance | Σ(x – mean)² / n | 32/8 = 4 |
| Standard deviation | √variance | √4 = 2 |
The standard deviation is in the same units as the data, while the variance is in squared units.
How Do You Calculate Variance Quickly?
In short: use the shortcut: the mean of the squares minus the square of the mean.
Shortcut
- Variance = (Σx² / n) – (mean)².
- For 3, 5, 7: Σx²/n = 83/3 and mean² = 25, so variance = 8/3.
- For a sample, divide by n – 1 instead of n; most aptitude questions use the population formula with n.
What Do the Values Tell You?
In short: a larger standard deviation means more spread; zero means every value is the same.
- Zero spread: data 4, 4, 4 have standard deviation 0.
- Range: easy to find but depends only on two values.
- Standard deviation: uses every value and is the most used measure.
- Comparison: relative spread uses the coefficient of variation in Correlation and Coefficient of Variation (CAT-Level).
Solved Examples
Example 1
Question: Find the range, mean deviation, variance and standard deviation of 2, 4, 4, 4, 5, 5, 7, 9.
- Mean = 40/8 = 5, and range = 9 – 2 = 7.
- Absolute deviations: 3, 1, 1, 1, 0, 0, 2, 4, sum 12, so mean deviation = 12/8 = 1.5.
- Squared deviations: 9, 1, 1, 1, 0, 0, 4, 16, sum 32, so variance = 32/8 = 4.
- Standard deviation = √4 = 2.
Answer: Range 7, mean deviation 1.5, variance 4 and standard deviation 2.
Example 2
Question: Find the variance and standard deviation of 6, 8, 10, 12, 14.
- Mean = 10.
- Squared deviations: 16, 4, 0, 4, 16, sum 40.
- Variance = 40/5 = 8, so standard deviation = √8 = 2.83.
Answer: Variance 8 and standard deviation about 2.83.
Example 3
Question: Use the shortcut to find the variance of 3, 5, 7.
- Σx² = 9 + 25 + 49 = 83, so Σx²/n = 83/3.
- Mean = 5, so mean² = 25.
- Variance = 83/3 – 25 = 8/3.
Answer: The variance is 8/3, about 2.67.
Example 4
Question: Find the variance of 1, 2, 3, 4, 5.
- Mean = 3.
- Squared deviations: 4, 1, 0, 1, 4, sum 10.
- Variance = 10/5.
Answer: The variance is 2.
Example 5
Question: Find the mean deviation about the mean of 2, 4, 6, 8.
- Mean = 5.
- Absolute deviations: 3, 1, 1, 3, sum 8.
- Mean deviation = 8/4.
Answer: The mean deviation is 2.
Shortcuts and Tricks
- Use the shortcut variance = mean of squares – square of the mean when the numbers are large.
- Subtract a convenient number from every value first; the spread does not change.
- For equally spaced data of n values with gap d, the variance is d²(n² – 1)/12.
- If all values are equal, the standard deviation is 0.
- Check: the standard deviation is never negative.
Common Mistakes
- Forgetting to take the square root to get the standard deviation.
- Using signed deviations in the mean deviation; absolute values are needed.
- Dividing by n – 1 when the question uses the population formula.
- Squaring the mean incorrectly in the shortcut.
- Treating the range as a measure that uses all values.
Practice Questions
- Find the range of 12, 5, 20, 8.
- Find the variance of 1, 2, 3, 4, 5.
- Find the standard deviation of 4, 4, 4.
- Find the mean deviation of 2, 4, 6, 8.
- Find the variance of 2, 4, 6, 8.
- Find the standard deviation of 2, 4, 4, 4, 5, 5, 7, 9.
Answers: 1) 15; 2) 2; 3) 0; 4) 2; 5) 5; 6) 2.
Why Is This Topic Important?
- Spread Averages alone hide differences in spread.
- Exam use Variance and standard deviation questions are common in CAT.
- Link They lead to the coefficient of variation in Correlation and Coefficient of Variation (CAT-Level).
What Comes Next?
The next topic is Data Classification and Frequency Distribution, which organises raw data into classes and frequencies.
Key Terms and Formulas
- Deviation The difference between a value and the mean
- Variance The average of squared deviations
- Standard deviation The square root of the variance
- Range Largest value minus smallest value
Related Topics
- Measures of Central Tendency – Mean, Median and Mode
- Data Classification and Frequency Distribution
- Histogram, Frequency Polygon and Ogive Construction and Interpretation
- Correlation and Coefficient of Variation (CAT-Level)
Exam Corner
Points to Remember
- Variance = Σ(x – mean)² / n.
- Standard deviation = √variance.
- Shortcut: variance = mean of squares – (mean)².
- Equal values give zero spread.
Do Not Confuse With
- Variance vs standard deviation The standard deviation is the square root of the variance.
- Mean deviation vs standard deviation The first uses absolute values; the second uses squares.
- Range vs standard deviation The range uses two values; the standard deviation uses all.
Memory Hook
Square the gaps, average them, then take the root.
GS Relevance
Frequently Asked Questions
What are the measures of dispersion?
The measures of dispersion are the range, mean deviation, variance and standard deviation. They show how widely data values are spread around the centre, so two data sets with the same mean but different spread can be told apart, and a larger value means more spread.
How do you calculate variance?
Find the mean, subtract it from each value, square each difference, add them and divide by the number of values. For 2, 4, 4, 4, 5, 5, 7, 9 the squared differences add up to 32 and the variance is 32 divided by 8, which is 4.
What is the shortcut formula for variance?
The shortcut formula is variance equals the mean of the squares minus the square of the mean. For 3, 5 and 7, the mean of the squares is 83 over 3 and the square of the mean is 25, so the variance is 8 over 3.
How is standard deviation related to variance?
The standard deviation is the positive square root of the variance, so it is expressed in the same units as the data. A variance of 4 corresponds to a standard deviation of 2, and a data set with every value equal has a standard deviation of zero.
What is the range of a data set?
The range is the difference between the largest and smallest values. For 2, 4, 4, 4, 5, 5, 7, 9 the range is 9 minus 2, which is 7. It is simple to find but uses only two values, so it ignores the spread of the rest.
PYQ Practice — Statement Analysis
1 The variance of 1, 2, 3, 4, 5 is 2.
The squared deviations sum to 10, and 10/5 = 2.
2 The standard deviation is the square of the variance.
It is the square root of the variance.
3 The standard deviation of 4, 4, 4 is 0.
All values equal the mean.
4 The range of 12, 5, 20, 8 is 15.
20 - 5 = 15.
Related Topics
Browse the full Quantitative Aptitude index