An Initiative by SAARTHI IAS
Maarg Manthan · Topic 24.4

Histogram, Frequency Polygon and Ogive Construction and Interpretation

Quantitative Aptitude › Statistics · Topic 24.4

A histogram shows a frequency distribution as adjacent bars whose heights are the class frequencies. A frequency polygon joins the midpoints of the tops of the bars, and an ogive plots cumulative frequencies against class limits, with the median read from the point where the less-than and more-than ogives cross.

Share:
Histogram, Frequency Polygon and Ogive Construction and Interpretation - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

A histogram shows a frequency distribution as adjacent bars whose heights are the class frequencies. A frequency polygon joins the midpoints of the tops of the bars, and an ogive plots cumulative frequencies against class limits, with the median read from the point where the less-than and more-than ogives cross.

At a Glance

  • Histogram Bars touch; height = frequency
  • Frequency polygon Join class-mark points
  • Less-than ogive Plot upper limit vs cumulative frequency
  • More-than ogive Plot lower limit vs cumulative frequency
  • Median Where the two ogives cross

Where Does It Fit?

This topic uses the table of Data Classification and Frequency Distribution. The graphs give the median and quartiles of Quartiles, Deciles and Percentiles of a Data Set visually, and data reading skills overlap with Data Interpretation from Bar Graphs and Line Graphs.

How Do You Draw a Histogram?

In short: draw a bar for each class, with no gaps, with class limits on the horizontal axis and frequencies on the vertical axis.

  • Equal classes: the bar height is the frequency.
  • Unequal classes: use frequency density = frequency / class width, so the area of each bar shows the frequency.
  • Continuous classes: use exclusive classes so that bars touch.
Class Frequency Width Frequency density
0 – 10 5 10 0.5
10 – 20 8 10 0.8
20 – 30 12 10 1.2
30 – 50 15 20 0.75

What Is a Frequency Polygon?

In short: plot a point at each class mark with its frequency, join the points with straight lines, and close the polygon at both ends with classes of zero frequency.

Class mark Frequency point
-5 (empty class) 0
5 5
15 8
25 12
35 10
45 5
55 (empty class) 0

What Is an Ogive and How Do You Read the Median From It?

In short: an ogive is a cumulative frequency curve. The less-than ogive rises, the more-than ogive falls, and they cross at the median.

Less-than ogive points More-than ogive points
(10, 5) (0, 40)
(20, 13) (10, 35)
(30, 25) (20, 27)
(40, 35) (30, 15)
(50, 40) (40, 5), (50, 0)

The two ogives meet at a height of n/2 = 20, and the horizontal value there is the median, about 25.83.

Solved Examples

Example 1

Question: Classes 0-10, 10-20, 20-30 have frequencies 5, 8, 12, and 30-50 has frequency 15. Find the frequency density of 30 – 50.

  1. Class width = 20.
  2. Density = 15/20.

Answer: The frequency density is 0.75, so the bar is 0.75 high.

Example 2

Question: List the points of the less-than ogive for the table with frequencies 5, 8, 12, 10, 5 and classes of width 10 starting at 0.

  1. Upper limits are 10, 20, 30, 40, 50.
  2. Cumulative frequencies are 5, 13, 25, 35, 40.

Answer: The points are (10, 5), (20, 13), (30, 25), (40, 35) and (50, 40).

Example 3

Question: List the points of the more-than ogive for the same table.

  1. Lower limits are 0, 10, 20, 30, 40, and 50.
  2. Start at 40 and subtract frequencies: 40, 35, 27, 15, 5, 0.

Answer: The points are (0, 40), (10, 35), (20, 27), (30, 15), (40, 5) and (50, 0).

Example 4

Question: Read the median from the ogive of the same table.

  1. n/2 = 20 lies between 13 at x = 20 and 25 at x = 30.
  2. Interpolating: 20 + (20 – 13)/(25 – 13) × 10 = 25.83.

Answer: The median is about 25.83, the same as the formula value.

Example 5

Question: List the points of the frequency polygon for the table above.

  1. Class marks are 5, 15, 25, 35, 45.
  2. Add empty classes at -5 and 55.

Answer: The points are (-5, 0), (5, 5), (15, 8), (25, 12), (35, 10), (45, 5) and (55, 0).

Shortcuts and Tricks

  • For unequal classes, always use frequency density.
  • A less-than ogive uses upper limits; a more-than ogive uses lower limits.
  • The two ogives intersect at the median, at height n/2.
  • For the polygon, add empty classes at both ends.
  • A histogram has no gaps; a bar chart does.

Common Mistakes

  • Using frequency as the bar height when the class widths are unequal.
  • Plotting the less-than ogive against lower limits.
  • Leaving gaps between the bars of a histogram.
  • Forgetting the empty classes at the ends of the polygon.
  • Reading the median at height n instead of n/2.

Practice Questions

  1. Find the frequency density of a class of width 5 and frequency 20.
  2. For cumulative frequencies 5, 13, 25, 35, 40, what height gives the median on the ogive?
  3. What are the class marks of the classes 0 – 10 and 10 – 20?
  4. Does a histogram have gaps between bars?
  5. What does the point (30, 25) on the less-than ogive mean?
  6. Where do the less-than and more-than ogives meet?

Answers: 1) 4; 2) 20; 3) 5 and 15; 4) no; 5) 25 observations are less than 30; 6) at the median.

Why Is This Topic Important?

  • Visual summary Graphs show shape and spread at a glance.
  • Exam use Ogive and histogram questions appear in CAT.
  • Link The ideas are used in Data Interpretation from Bar Graphs and Line Graphs.

What Comes Next?

The next topic is Correlation and Coefficient of Variation (CAT-Level), which measures the relationship between two variables.

Key Terms and Formulas

  • Histogram A bar graph of a frequency distribution with touching bars
  • Frequency polygon A line graph through the class marks
  • Ogive A cumulative frequency curve
  • Frequency density Frequency divided by class width

Exam Corner

Points to Remember

  • Histogram bars touch.
  • Frequency density = frequency / width for unequal classes.
  • Less-than ogive: upper limits; more-than ogive: lower limits.
  • The ogives cross at the median.

Do Not Confuse With

  • Histogram vs bar chart A histogram has touching bars for continuous classes.
  • Less-than vs more-than ogive One rises and the other falls.
  • Polygon vs ogive The polygon uses class marks; the ogive uses cumulative frequencies.

Memory Hook

Bars touch, lines join the marks, the crossing is the median.

GS Relevance

Statistical graphs for SSC CGL and CAT quantitative aptitude: constructing and reading histograms, frequency polygons and ogives, and finding the median from an ogive.

Frequently Asked Questions

What is a histogram?

A histogram is a graph of a frequency distribution in which each class is shown as a bar whose height is its frequency. The bars touch because the classes are continuous, and for unequal class widths the height is the frequency density, so area shows frequency.

How do you draw a frequency polygon?

Plot a point at each class mark with the class frequency as its height, join the points with straight lines, and add empty classes of zero frequency at both ends so that the polygon closes on the horizontal axis.

What is an ogive?

An ogive is a graph of cumulative frequency. A less-than ogive plots upper class limits against cumulative frequencies and rises, while a more-than ogive plots lower limits against the remaining frequencies and falls, and the two curves cross at the median.

How do you find the median from an ogive?

Take half of the total frequency, find that height on the vertical axis, move across to the ogive and read the value on the horizontal axis. For a total of 40 the height is 20, and the median is about 25.83.

What is frequency density?

Frequency density is the frequency of a class divided by its class width. It is used for histograms with unequal class widths so that the area of each bar, not its height, represents the frequency. A class of width 20 with frequency 15 has density 0.75.

PYQ Practice — Statement Analysis

1 The bars of a histogram touch each other.
True

The classes are continuous.

2 The less-than and more-than ogives intersect at the mean.
False

They intersect at the median.

3 Frequency density equals frequency divided by class width.
True

It is used for unequal class widths.

4 A less-than ogive is plotted against lower class limits.
False

It uses upper class limits.

Share: