Common Logarithm (Base 10) and Natural Logarithm (Base e)
Quantitative Aptitude › Logarithms, Surds and Indices · Topic 14.3
A common logarithm has base 10 and is written log x, and a natural logarithm has base e, about 2.71828, and is written ln x. They are linked by ln x = 2.303 × log x, and the whole-number part of a common logarithm is called the characteristic.
5 min read · Quantitative Aptitude · Logarithms, Surds and Indices
Quick Answer
A common logarithm has base 10 and is written log x, and a natural logarithm has base e, about 2.71828, and is written ln x. They are linked by ln x = 2.303 × log x, and the whole-number part of a common logarithm is called the characteristic.
At a Glance
- Common log Base 10, written log x
- Natural log Base e, written ln x
- Value of e About 2.71828
- Conversion ln x = 2.303 log x (about)
- log 2 0.3010
- log 3 0.4771
Where Does It Fit?
This topic builds on Laws of Logarithms and the Change of Base Rule by fixing the two bases that appear in most questions. The ideas here are used for Finding the Number of Digits in a Number Using Logarithms, where the whole-number part of a logarithm gives the number of digits.
What Are Common and Natural Logarithms?
In short: base 10 logarithms suit our decimal number system, and base e logarithms suit growth and decay.
| Feature | Common logarithm | Natural logarithm |
|---|---|---|
| Base | 10 | e, about 2.71828 |
| Symbol | log x or log10 x | ln x or loge x |
| Key value | log 10 = 1 | ln e = 1 |
| Value at 1 | log 1 = 0 | ln 1 = 0 |
| Typical use | Digits, magnitude, scales | Growth, decay, continuous compounding |
- Common values: log 10 = 1, log 100 = 2, log 1000 = 3, log 0.1 = -1 and log 0.01 = -2.
- Natural values: ln e = 1, ln e2 = 2 and ln 1 = 0.
- Constant e: the number e is called the Euler number. It is irrational, and it is the base on which continuous growth in Continuous Compounding of Interest is built.
What Are the Characteristic and the Mantissa?
In short: the common logarithm of a number splits into a whole-number part, the characteristic, and a decimal part, the mantissa, which is always between 0 and 1.
| Number | Standard form | Characteristic |
|---|---|---|
| 4567 | 4.567 × 103 | 3 |
| 45.67 | 4.567 × 101 | 1 |
| 4.567 | 4.567 × 100 | 0 |
| 0.4567 | 4.567 × 10-1 | -1 |
| 0.0456 | 4.56 × 10-2 | -2 |
- Numbers above 1: the characteristic is one less than the number of digits before the decimal point.
- Numbers below 1: the characteristic is negative. It equals minus one more than the number of zeros straight after the decimal point.
- Mantissa: numbers with the same digits in the same order, such as 4567 and 45.67, have the same mantissa.
How Do You Use Standard Log Values and Convert Between ln and log?
In short: a few standard values and the product and quotient rules from Laws of Logarithms and the Change of Base Rule give almost every value asked in an exam.
| Value | How to get it |
|---|---|
| log 4 = 0.6020 | 2 × log 2 |
| log 5 = 0.6990 | 1 – log 2 |
| log 6 = 0.7781 | log 2 + log 3 |
| log 8 = 0.9030 | 3 × log 2 |
| log 9 = 0.9542 | 2 × log 3 |
| log 12 = 1.0791 | 2 × log 2 + log 3 |
Conversion
- ln x = log x / log e, and log e is about 0.4343.
- So ln x is about 2.303 × log x, and ln 10 is about 2.3026.
Solved Examples
Example 1
Question: Find log10 0.01.
- Write 0.01 = 10-2.
- The logarithm of 10-2 to base 10 is -2.
Answer: -2
Example 2
Question: State the characteristic of log 4567 and of log 0.0456.
- 4567 has 4 digits before the point, so the characteristic is 4 – 1 = 3.
- 0.0456 = 4.56 × 10-2, so the characteristic is -2.
Answer: 3 and -2
Example 3
Question: Given log 2 = 0.3010 and log 3 = 0.4771, find log 6, log 12 and log 1.5.
- log 6 = log 2 + log 3 = 0.7781.
- log 12 = 2 × 0.3010 + 0.4771 = 1.0791.
- log 1.5 = log 3 – log 2 = 0.4771 – 0.3010 = 0.1761.
Answer: 0.7781, 1.0791 and 0.1761
Example 4
Question: Evaluate ln e5 and ln 1.
- ln e5 = 5 × ln e = 5.
- ln 1 = 0 because e0 = 1.
Answer: 5 and 0
Example 5
Question: Find ln 100 using ln 10 = 2.3026.
- ln 100 = ln 102 = 2 × ln 10.
- 2 × 2.3026 = 4.6052.
Answer: About 4.605
Shortcuts and Tricks
- Memorise log 2 = 0.3010, log 3 = 0.4771 and log 7 = 0.8451. Every other log of a small integer is a sum of these.
- For the characteristic of a number above 1, count the digits before the point and subtract 1.
- For a number below 1, count the zeros after the decimal point and add 1 to get the size of the negative characteristic.
- To get ln from log, multiply by 2.303. To get log from ln, divide by 2.303.
- A power of 10 is the easiest case: log 10n = n for every integer n.
Common Mistakes
- Using 0.3010 for log 5. The value 0.3010 belongs to log 2, and log 5 = 1 – 0.3010 = 0.6990.
- Confusing the characteristic of 0.0456, which is -2, with 2.
- Treating ln as log base 10. The symbol ln means base e.
- Forgetting that the mantissa is not changed by moving the decimal point.
- Writing log 0 = 0. The logarithm of 0 is not defined.
Practice Questions
- Find log10 1000.
- Find log10 0.1.
- Find ln e.
- Characteristic of log 25.6.
- Find log 5 if log 2 = 0.3010.
- Find eln 7.
Answers: 1) 3; 2) -1; 3) 1; 4) 1; 5) 0.6990; 6) 7.
Why Is This Topic Important?
- Standard bases Almost every numerical logarithm question uses base 10 or base e.
- Exam use Questions give log 2 and log 3 and ask for other values.
- Digit counting The characteristic leads straight to the number of digits.
- Growth Base e appears in continuous growth, as in Continuous Compounding of Interest.
What Comes Next?
The next topic is Simplification of Surds and Rationalization of Denominators. It moves from exponents and logarithms to roots, the other inverse of a power.
Key Terms and Formulas
- Common logarithm Logarithm to base 10
- Natural logarithm Logarithm to base e
- Characteristic The whole-number part of a common logarithm
- Mantissa The decimal part of a common logarithm, between 0 and 1
- Euler number The constant e, about 2.71828
- Standard form A number written as a value from 1 to 10 times a power of 10
Related Topics
- Laws of Logarithms and the Change of Base Rule
- Simplification of Surds and Rationalization of Denominators
- Laws of Indices and Exponents
- Comparison of Surds of Different Orders
Exam Corner
Points to Remember
- log means base 10 and ln means base e.
- log 10 = 1, log 1 = 0 and ln e = 1.
- Characteristic of a number above 1 is the number of digits before the point minus 1.
- ln x is about 2.303 times log x.
- log 2 = 0.3010, log 3 = 0.4771.
Do Not Confuse With
- log vs ln log is base 10 and ln is base e.
- Characteristic vs mantissa The characteristic is the whole part and the mantissa is the decimal part.
- log 5 vs log 2 log 5 = 1 – log 2, not the same value.
- e vs 10 e is about 2.718 and is the base of natural logarithms.
Memory Hook
Log is ten, ln is e, and the whole part of a log counts the digits minus one.
GS Relevance
Frequently Asked Questions
What is a common logarithm?
A common logarithm is a logarithm to base 10, written as log x. It answers the question to what power 10 must be raised to give x. For example, the common logarithm of 1000 is 3, because 10 raised to the power 3 equals 1000.
What is a natural logarithm?
A natural logarithm is a logarithm to base e, where e is about 2.71828, and it is written ln x. The natural logarithm of e is 1, the natural logarithm of 1 is 0, and ln x is about 2.303 times the common logarithm of x.
What is the characteristic of a logarithm?
The characteristic of a common logarithm is its whole-number part. For a number above 1, it equals the number of digits before the decimal point minus 1, so log of 4567 has characteristic 3. For a number below 1 it is negative.
What is the mantissa of a logarithm?
The mantissa is the decimal part of a common logarithm and is always between 0 and 1. Numbers that have the same digits in the same order, such as 4567 and 45.67, have the same mantissa, and only their characteristics differ.
What are the values of log 2 and log 3 to base 10?
The standard values are log 2 equal to 0.3010 and log 3 equal to 0.4771 to four decimal places. Using the product and quotient rules, these give log 6 as 0.7781, log 5 as 0.6990, and log 12 as 1.0791 without a table.
PYQ Practice — Statement Analysis
1 The natural logarithm uses base 10.
The natural logarithm uses base e, about 2.71828. Base 10 is the common logarithm.
2 The common logarithm of 1000 is 3.
103 = 1000.
3 The characteristic of log 0.0456 is 2.
0.0456 = 4.56 × 10-2, so the characteristic is -2.
4 ln e equals 1.
e raised to the power 1 equals e.
Related Topics
Browse the full Quantitative Aptitude index