Lending Rate Regimes: Benchmark Prime Lending Rate (BPLR), Base Rate, MCLR, External Benchmark Lending Rate; Components of Base Rate System
Indian Economy › Money, Monetary Policy and the RBI · Topic 4.16
Lending rate regimes are the RBI rules for how banks fix the floor of their loan rates. India moved from the Benchmark Prime Lending Rate (BPLR) in 2003, to the Base Rate on 1 July 2010, to the Marginal Cost of Funds based Lending Rate (MCLR) on 1 April 2016, and to the External Benchmark Lending Rate (EBLR) on 1 October 2019. Under the EBLR, floating rate retail and small business loans are linked to the repo rate or another external benchmark, plus a spread, and reset at least every three months. The aim of each change was faster and fairer transmission of policy rate changes to borrowers.
6 min read · UPSC Prelims and Mains · Indian Economy · Money, Monetary Policy and the RBI
At a Glance
- BPLR 2003, bank-specific, opaque
- Base Rate 1 July 2010, cost of funds based
- MCLR 1 April 2016, marginal cost based
- EBLR 1 October 2019, repo or other external benchmark
- EBLR share 68.2 per cent of floating loans, end June 2026
- Exam link UPSC Prelims and Mains, Indian Economy: Money, Monetary Policy and the RBI
Where Does It Fit?
A repo rate decision of the Monetary Policy Committee reaches borrowers through these lending rate systems, which are the link in the interest rate channel of Transmission of Monetary Policy: Interest Rate, Exchange Rate, Credit, Asset Price and Expectation Channels. The next topic covers the committee that sets the repo rate. Previous topic: Unconventional Tools: Quantitative Easing, Operation Twist, Forward Guidance, Helicopter Money, Negative Interest Rate Policy, Seigniorage. Next topic: Monetary Policy Committee (MPC): Composition and Role.
How Do the Four Lending Rate Regimes Compare?
| Feature | BPLR | Base Rate | MCLR | EBLR |
|---|---|---|---|---|
| Start | 2003 | 1 July 2010 | 1 April 2016 | 1 October 2019 |
| Basis | Bank cost plus own judgment | Average cost of funds | Marginal cost of funds | External benchmark |
| Transparency | Low | Better | Better | Highest |
| Floor | Banks lent below BPLR to good borrowers | No loan below Base Rate, with exceptions | No loan below MCLR, with exceptions | Not applicable, bank adds a spread |
| Reset | At bank discretion | At bank discretion | Periodic, set by bank, often 6 months or a year | At least once in 3 months |
| Pass-through | Weak | Weak | Partial | Fast and nearly full |
What Are the Components of the Base Rate and MCLR?
| System | Components |
|---|---|
| Base Rate (2010) | Cost of deposits, negative carry on CRR and SLR, unallocated overhead costs, average return on net worth |
| MCLR (2016) | Marginal cost of funds, negative carry on CRR, operating costs, tenor premium |
| Marginal cost of funds | Marginal cost of borrowings and deposits with a 92 per cent weight, and return on net worth with an 8 per cent weight |
| EBLR (2019) | External benchmark plus a spread. The spread covers operating cost, credit risk premium and bank margin |
What Else Should You Remember?
- BPLR: Benchmark Prime Lending Rate was announced for banks to publish. It was supposed to be the rate for the best borrowers, but most loans were given below it, so it lost meaning
- Base Rate system: The Base Rate was the minimum rate below which a bank could not lend, except for some categories. It used the average cost of funds, so a fall in repo reached loan rates slowly
- Base Rate worked example: If the cost of deposits is 6.00 per cent, negative carry on CRR and SLR is 0.45 per cent, unallocated overheads are 0.75 per cent and return on net worth is 1.30 per cent, the Base Rate is 6.00 + 0.45 + 0.75 + 1.30 = 8.50 per cent
- MCLR: The marginal cost of funds based lending rate is the internal benchmark linked to the cost of raising the latest funds. Banks publish MCLR for tenors from overnight to one year and sometimes longer
- MCLR worked example: Say the marginal rate on deposits and borrowings is 6.00 per cent and the return on net worth is 12.00 per cent. Marginal cost of funds is 0.92 x 6.00 + 0.08 x 12.00 = 5.52 + 0.96 = 6.48 per cent. Negative carry on CRR at 3 per cent is 6.48 x 0.03 / 0.97 = 0.20 per cent. With operating costs of 1.50 per cent and a tenor premium of 0.10 per cent the MCLR is 6.48 + 0.20 + 1.50 + 0.10 = 8.28 per cent. A loan at a spread of 0.60 per cent costs 8.88 per cent. The figures are illustrative
- EBLR: The External Benchmark Lending Rate system required banks to link new floating rate loans to personal, retail and micro and small enterprise borrowers to an external benchmark from 1 October 2019. Allowed benchmarks are the policy repo rate, the 91-day treasury bill yield, the 182-day treasury bill yield or any other benchmark published by the Financial Benchmarks India Limited
- EBLR worked example: Suppose the repo is 5.50 per cent and the bank adds a spread of 2.50 per cent. The loan rate is 5.50 + 2.50 = 8.00 per cent. If the repo rises by 25 basis points the loan rate rises to 8.25 per cent after the reset. The credit risk part of the spread can be changed only when the credit assessment of the borrower changes
- MCLR versus EBLR: MCLR is set by the bank using its own cost of funds and is revised at the bank’s chosen interval, so the repo signal passes slowly. EBLR is tied to a rate that the RBI sets, so the signal passes at once or within three months
- Share of loans: The share of EBLR-linked loans in floating rate rupee loans of scheduled commercial banks was 68.2 per cent at end June 2026, and MCLR-linked loans were 29.6 per cent. Private and foreign banks have higher EBLR shares than public sector banks
- Switching: Borrowers of older MCLR or base rate loans may move to EBLR, subject to a small switching fee, as per RBI rules
- Impact on banks: With EBLR, the lending rate moves quickly but deposits reprice slowly, which can squeeze the net interest margin when repo falls.
- Latest status: On 7 October 2026 the repo rate was raised to 5.50 per cent, so EBLR loans linked to the repo rise by 25 basis points on reset. The Monetary Policy Committee is covered in Monetary Policy Committee (MPC): Composition and Role
Why Does It Matter for the Exam?
- Typical Prelims angle: Questions on the Base Rate and MCLR have tested what the benchmark is, whether banks can lend below it and what it is based on
- Order: BPLR 2003, Base Rate 2010, MCLR 2016, EBLR 2019
- Components: Know the four components of MCLR and the four of the Base Rate
- Pass-through: EBLR is the fastest
- Common errors: Saying MCLR is linked to the repo rate, or that the Base Rate is based on marginal cost
As an analytical point, each new regime moved the benchmark away from the bank and towards the market, which improves transparency. The final step to the EBLR makes the borrower sensitive to every repo change, which is good in a cut cycle and costly in a hiking cycle such as that begun in October 2026.
Why Is This Topic Important?
- Order and dates One-line MCQs
- Components Match questions
- Pass-through EBLR link
What Came Next?
The next topic covers the Monetary Policy Committee. Next topic: Monetary Policy Committee (MPC): Composition and Role.
Key People and Terms
- BPLR Old prime rate
- Base Rate Floor, average cost
- MCLR Marginal cost benchmark
- EBLR Repo-linked rate
- Spread Bank margin over benchmark
- Tenor premium Extra for longer term
Exam Corner
Points to Remember
- BPLR 2003, Base Rate 2010, MCLR 2016, EBLR 2019.
- Marginal cost of funds: 92 per cent funds, 8 per cent net worth.
- EBLR reset: at least every 3 months.
- MCLR example: 8.28 per cent.
- EBLR loan rate = benchmark + spread.
Do Not Confuse With
- Base Rate and MCLR Average cost of funds versus marginal cost of funds
- MCLR and EBLR Internal benchmark versus external benchmark
- Repo rate and lending rate Policy rate versus the rate a borrower pays
Memory Hook
Prime, Base, Marginal, External: each step moves the benchmark closer to the repo.
Mains Angle
Questions ask why the RBI changed the lending rate system. These points give a frame.
- Problem Weak pass-through
- Reform Four regimes
- Next Deposit rates, bond market
A Question You May Face
An original practice question, not a past paper question.
“Trace the evolution of lending rate regimes in India and explain how the External Benchmark Lending Rate improved monetary policy transmission.”
How to Answer
- Trace BPLR to EBLR.
- Compare MCLR versus EBLR.
- Impact Faster pass-through.
- Issue Bank margins.
GS Relevance
Frequently Asked Questions
What is MCLR?
MCLR is the Marginal Cost of Funds based Lending Rate, an internal benchmark introduced by the RBI on 1 April 2016. It is built from the marginal cost of funds, negative carry on CRR, operating costs and a tenor premium, and banks cannot generally lend below it.
What is the difference between MCLR and EBLR?
MCLR is an internal benchmark set by each bank from its marginal cost of funds and reset at its chosen interval, so repo changes pass slowly. EBLR links floating loans to an external benchmark such as the repo rate plus a spread and resets at least every three months, so pass-through is faster.
What are the components of the Base Rate?
The Base Rate, in force from 1 July 2010, has four components: cost of deposits, negative carry on CRR and SLR, unallocated overhead costs and the average return on net worth. Banks could not lend below it except for specified categories.
What is the External Benchmark Lending Rate?
The External Benchmark Lending Rate is the system, from 1 October 2019, under which new floating rate retail and micro and small enterprise loans must be linked to an external benchmark such as the repo rate or treasury bill yields. The bank adds a spread and resets the rate at least every three months.
What is the formula for MCLR?
MCLR equals marginal cost of funds plus negative carry on CRR plus operating costs plus tenor premium. For example, 6.48 + 0.20 + 1.50 + 0.10 gives 8.28 per cent. Marginal cost of funds gives a 92 per cent weight to borrowing costs and 8 per cent to return on net worth.
Which benchmarks are allowed under EBLR?
Banks can choose the RBI policy repo rate, the 91-day treasury bill yield, the 182-day treasury bill yield or any other benchmark published by the Financial Benchmarks India Limited. Most banks choose the repo rate, which makes loans respond directly to Monetary Policy Committee decisions.
PYQ Practice — Statement Analysis
1 The Base Rate system came into effect on 1 July 2010.
It replaced the BPLR.
2 MCLR is based on the average cost of funds.
It is based on the marginal cost of funds.
3 Under EBLR, floating rate loans must be reset at least once in three months.
This speeds up pass-through.
4 BPLR was introduced after MCLR.
BPLR came first, in 2003.
Related Topics
Browse the full Indian Economy index