An Initiative by SAARTHI IAS
Maarg Manthan · Topic 4.1

Letter Coding (Direct, Shifted and Reverse Alphabet Coding)

Reasoning › Coding-Decoding · Topic 4.1

Letter coding replaces each letter of a word by another letter using a fixed rule. The three common rules are a direct shift forward or backward by the same number of places, a reverse-alphabet (opposite letter) rule where the two positions add up to 27, and a progressive shift where the step changes from letter to letter. Find the rule from the given example, then apply it letter by letter.

Share:
Letter Coding (Direct, Shifted and Reverse Alphabet Coding) - Reasoning - MaargX UPSC Maarg Manthan

Quick Answer

Letter coding replaces each letter of a word by another letter using a fixed rule. The three common rules are a direct shift forward or backward by the same number of places, a reverse-alphabet (opposite letter) rule where the two positions add up to 27, and a progressive shift where the step changes from letter to letter. Find the rule from the given example, then apply it letter by letter.

At a Glance

  • Position of letters A = 1, B = 2, …, Z = 26
  • Direct shift Every letter moves the same number of places
  • Reverse alphabet Position of a letter + position of its opposite = 27
  • Progressive shift Step changes: +1, +2, +3, +4 …
  • Anchor letters EJOTY = 5, 10, 15, 20, 25
  • Wrap around After Z comes A, before A comes Z

Where Does It Fit?

This is the first topic of the Coding-Decoding macro and the base for the rest. The numeric side of the same idea is in Number Coding (Assigning Numeric Values to Letters/Words), jumbled-letter codes are in Coding Based on Jumbled or Reversed Letters Within a Word, and codes built from the numeric value of letters are in Coding Based on the ASCII or Positional Numeric Value of Letters.

What Is Letter Coding and Which Patterns Appear?

In short: in letter coding every letter of the given word is changed by one rule, so one worked pair (word and code) is enough to find the rule and write the code of any new word.

Pattern Rule Example
Forward shift Each letter moves n places ahead CAT with +2 becomes ECV
Backward shift Each letter moves n places back CAT with -1 becomes BZS
Reverse alphabet A becomes Z, B becomes Y, and so on CAT becomes XZG
Progressive shift Shift is +1, +2, +3 … in order ROAD becomes SQDH
Alternate shift Odd letters shift one way, even letters the other LAMP with +1, -1, +1, -1 becomes MZNO

To identify the rule, write the position of each letter of the word and of its code below it, then look at the difference. A constant difference means a direct shift, a sum of 27 means reverse alphabet, and a difference that grows by 1 means a progressive shift.

How Do You Solve Shifted Alphabet Codes?

In short: convert letters to positions, add or subtract the shift, convert back, and wrap around when you cross Z or A.

Letter A E J O T Y Z
Position 1 5 10 15 20 25 26
  • Anchor letters: remember EJOTY as 5, 10, 15, 20, 25. From any anchor you can count at most two places to reach a nearby letter.
  • Wrap around: if the position goes above 26, subtract 26. If it falls below 1, add 26. So Y with +3 gives 28 – 26 = 2, which is B.
  • Reading the shift: if DELHI is coded as EFMIJ, every position is one more, so the rule is +1 and AGRA becomes BHSB.
  • Mixed shifts: when different letters use different shifts, write the shift for each position, for example +2, -1, +2, -1, and apply it to the new word in the same order.

When a code has to be reversed, that is, finding the original word from its code, apply the opposite operation. Decoding whole sentences is handled in Decoding a Given Coded Message or Sentence.

How Does Reverse Alphabet (Opposite Letter) Coding Work?

In short: in reverse alphabet coding each letter is replaced by the letter at the same distance from the other end of the alphabet, and the two positions always add up to 27.

Opposite letter rule

  • Opposite position = 27 – position of the letter.
  • A and Z, B and Y, C and X, D and W, E and V, F and U, G and T, H and S, I and R, J and Q, K and P, L and O, M and N.
  • Vowel check: A, E, I, O, U become Z, V, R, L, F.

Example: M is the 13th letter, so its opposite is the 14th, which is N. So MAN becomes NZM. The 13 pairs are easy to memorise as the first half A to M against the second half Z to N. Opposite-letter codes are also used inside analogy questions such as Alphabet-Based Analogy (Letter Position and Pattern Relationships).

For a progressive code, write the steps first. In ROAD to SQDH the steps are R+1, O+2, A+3, D+4, so the shift grows by one each time. Always test the rule on every letter of the given pair, not just the first one, because two different rules can agree on the first letter.

Solved Examples

Example 1

Question: In a code each letter is shifted two places forward. How is MIND written?

  1. Positions: M = 13, I = 9, N = 14, D = 4.
  2. Add 2 to each: 15, 11, 16, 6.
  3. Convert back: O, K, P, F.

Answer: MIND is written as OKPF.

Example 2

Question: In a certain code MOON is written as NPPO. How is STAR written in that code?

  1. M to N, O to P, O to P, N to O, so every letter moves one place forward.
  2. S becomes T, T becomes U, A becomes B, R becomes S.

Answer: STAR is written as TUBS.

Example 3

Question: If FAN is written as UZM in a code, how is PEN written?

  1. Positions of FAN: 6, 1, 14. Positions of UZM: 21, 26, 13.
  2. Each pair adds up to 27 (6 + 21, 1 + 26, 14 + 13), so this is reverse alphabet coding.
  3. P = 16 gives 11 = K, E = 5 gives 22 = V, N = 14 gives 13 = M.

Answer: PEN is written as KVM.

Example 4

Question: If ROAD is coded as SQDH, how is LANE coded?

  1. R to S is +1, O to Q is +2, A to D is +3, D to H is +4.
  2. Apply +1, +2, +3, +4 to LANE: L + 1 = M, A + 2 = C, N + 3 = Q, E + 4 = I.

Answer: LANE is coded as MCQI.

Example 5

Question: In a code, letters are shifted by +1 for odd positions and -1 for even positions of the word. How is BOARD written?

  1. Letter 1 (B) +1 = C. Letter 2 (O) -1 = N.
  2. Letter 3 (A) +1 = B. Letter 4 (R) -1 = Q.
  3. Letter 5 (D) +1 = E.

Answer: BOARD is written as CNBQE.

Shortcuts and Tricks

  • Write positions under the letters first. Almost every pattern is visible in two minutes of arithmetic.
  • For opposite letters use 27 minus the position, or pair the letters from both ends of A to Z.
  • Use EJOTY (5, 10, 15, 20, 25) as anchors so you never count from A.
  • Check the rule on the last letter of the given pair too. Progressive codes fool you if you check only the first.
  • When the code of a long word is asked, code only the letters that matter for the options and eliminate the rest.

Common Mistakes

  • Forgetting to wrap around: Y shifted by +3 is B, not a letter after Z.
  • Using 26 instead of 27 for opposite letters. Position sums are 27, so A pairs with Z and not with a 26th shift of itself.
  • Assuming a shift rule from one letter only, when the rest of the word follows a progressive or alternating rule.
  • Counting the given letter itself when moving forward, which gives an answer one place off.
  • Mixing up coding with decoding, where the shift is applied in the reverse direction.

Practice Questions

  1. If every letter moves 3 places forward, how is FISH written?
  2. Write DOG in the opposite-letter (reverse alphabet) code.
  3. If CLOCK is coded as DMPDL, how is TIME coded?
  4. Each letter is moved 2 places back. How is PAIR written?
  5. Write MAN in the reverse alphabet code.
  6. What is the opposite letter of J in the reverse alphabet code?

Answers: 1) ILVK; 2) WLT; 3) UJNF; 4) NYGP; 5) NZM; 6) Q.

Why Is This Topic Important?

  • Foundation All other coding types build on position and shift ideas.
  • Frequency At least one letter coding question appears in most reasoning papers.
  • Speed Anchor letters and the sum-27 rule cut solving time to under a minute.
  • Link to analogy Letter-position logic is reused in Alphabet-Based Analogy (Letter Position and Pattern Relationships).

What Comes Next?

The next topic is Number Coding (Assigning Numeric Values to Letters/Words). It moves from letters to numbers and shows how numeric values are assigned to letters and words.

Key Terms and Formulas

  • Position value Number of a letter in the alphabet, A = 1 to Z = 26
  • Opposite letter Letter whose position adds up to 27
  • Shift Number of places a letter moves
  • Wrap around Going from Z back to A
  • Progressive code Shift grows by a fixed step
  • EJOTY Anchors for 5, 10, 15, 20, 25

Exam Corner

Points to Remember

  • A is 1 and Z is 26; opposite letters sum to 27.
  • Always verify the rule on every letter of the given example.
  • Wrap around after Z and before A.
  • EJOTY gives positions 5, 10, 15, 20, 25.
  • A progressive shift needs the steps written down in order.

Do Not Confuse With

  • Forward shift vs reverse alphabet A shift keeps the order of the alphabet; reverse alphabet flips it.
  • Coding vs decoding Decoding applies the opposite shift to the code.
  • Position sum 26 vs 27 Opposite letters add to 27, because A = 1 and Z = 26.
  • Constant vs progressive shift A constant shift uses one number; a progressive shift changes at each letter.

Memory Hook

Write positions, find the difference, then apply it; opposites always make 27.

GS Relevance

Core CSAT, SSC CGL, banking and CDS coding-decoding topic: single-step letter shifts, opposite-letter coding and progressive shifts are asked almost every year.

Frequently Asked Questions

What is letter coding in reasoning?

Letter coding is a reasoning question type in which every letter of a word is replaced by another letter according to one fixed rule. You study the given word and its code, find the rule such as a shift or opposite letter, and apply it to a new word.

How do you solve reverse alphabet coding questions?

Replace each letter with its opposite from the other end of the alphabet. The positions of the two letters always add up to 27, so A becomes Z, B becomes Y and M becomes N. Subtract the position of each letter from 27 and convert back.

What is the shortcut for finding letters in coding-decoding?

Memorise the anchor letters EJOTY, which stand for positions 5, 10, 15, 20 and 25. From these you can count a few steps to any letter, and for opposite letters use the rule that the two positions add up to 27.

How do you find the rule in a shifted letter code?

Write the alphabet position of each letter of the word and of its code, and compare. A constant difference means a direct shift, a sum of 27 means opposite letters, and a difference that rises by one each time means a progressive shift. Verify on all letters.

What happens when a shift goes past Z in coding?

The alphabet wraps around, so after Z the count starts again from A. In position terms, if the new position is greater than 26, subtract 26. For example, Y shifted three places forward is position 28, which becomes 2, so the letter is B.

PYQ Practice — Statement Analysis

1 In reverse alphabet coding the positions of a letter and its opposite add up to 27.
True

A is 1 and Z is 26, so every pair such as B and Y or M and N sums to 27.

2 If every letter of CAT is shifted two places forward, the code is ECV.
True

C becomes E, A becomes C and T becomes V.

3 In the opposite-letter code, the letter opposite to M is L.
False

M is 13, so its opposite is 27 minus 13 = 14, which is N.

4 Y shifted three places forward becomes B.
True

Y is 25, plus 3 gives 28, minus 26 gives 2, which is B.

Share: