An Initiative by SAARTHI IAS
Maarg Manthan · Topic 25.9

Data Interpretation with Two-Variable Comparison Charts (Radar, Scatter and Combination Graphs)

Quantitative Aptitude › Data Interpretation · Topic 25.9

Two-variable comparison charts, such as scatter plots, radar charts and combination graphs, show how two quantities relate or how several quantities compare across categories. The solver reads each point or axis, compares values, and judges the direction of the relationship.

Share:
Data Interpretation with Two-Variable Comparison Charts (Radar, Scatter and Combination Graphs) - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

Two-variable comparison charts, such as scatter plots, radar charts and combination graphs, show how two quantities relate or how several quantities compare across categories. The solver reads each point or axis, compares values, and judges the direction of the relationship.

At a Glance

  • Scatter plot One dot for each pair of values
  • Radar chart Several categories on spokes
  • Combination graph Bars plus a line
  • First step Read both axes
  • Key idea Relationship, not proof of cause
  • Data used here Fictional practice data

Where Does It Fit?

This topic follows Data Interpretation Involving Ratio and Percentage Change Across Multiple Years and extends the bar, line and pie readings of Data Interpretation from Bar Graphs and Line Graphs and Data Interpretation from Pie Charts to charts that carry two variables. It leads into Approximation-Based Techniques for Fast Calculation in Data Interpretation, where speed methods are used on such charts.

How Do You Read a Scatter Plot?

In short: a scatter plot shows one dot for every pair of values, with one variable on each axis. The pattern of dots shows whether the two variables rise together, move in opposite directions, or have no clear link.

The fictional data below could be drawn as a scatter plot of study hours against test score for six students.

Student Study hours per day Test score (out of 100)
1 1 40
2 2 50
3 3 55
4 4 65
5 5 70
6 6 80
  • Direction: as study hours rise from 1 to 6, the score rises from 40 to 80. The dots slope upward, which shows a positive relationship.
  • Average rate: from 1 hour to 6 hours the score rises by 40 marks over 5 hours, which is 8 marks per hour on average.
  • Reading a value: the score at 3.5 hours lies between 55 and 65, so about 60.
  • Caution: a pattern is a relationship, not proof of a cause. Values outside the plotted range should not be predicted from it.

How Do You Read Radar and Combination Graphs?

In short: a radar chart places each category on a spoke from the centre and joins the points for each series. A combination graph uses bars for one quantity and a line for another, usually on two scales.

First, a fictional radar data set for two candidates scored on five skills.

Skill Candidate X Candidate Y X minus Y
Verbal 70 60 10
Quantitative 80 90 -10
Logic 60 70 -10
Memory 50 80 -30
Speed 90 50 40
Total 350 350 0
  • Totals can match: both candidates total 350, so the average is 70 for each, yet their shapes differ. X is strong in speed, and Y is strong in memory.
  • Largest gap: Speed has the largest gap, 90 against 50, a difference of 40.
  • Radar caution: the area covered by the shape is not a reliable measure, so read the actual values.

Next, a fictional combination graph: units sold as bars and price per unit as a line.

Year Units sold (bars) Price per unit in Rs (line) Revenue in Rs
Year 1 100 50 5,000
Year 2 120 45 5,400
Year 3 150 40 6,000
  • Two scales: the left axis counts units and the right axis shows rupees. Always check which axis belongs to which series.
  • Derived value: revenue equals units multiplied by price, so Year 2 revenue is 120 × 45 = 5,400.
  • Opposite movement: units rose 50% from Year 1 to Year 3, while price fell 20%. Revenue still rose by 20%, from 5,000 to 6,000.

What Are the Common Questions and Traps?

In short: the questions ask for a value, a difference, a rate of change, a comparison or the direction of a relationship.

Useful calculations

  • Average rate of change = Change in second variable / Change in first variable.
  • Difference between two series in a category = Value of X – Value of Y.
  • Derived value in a combination graph = Bar value × Line value.
  • Percentage change = (New – Old) / Old × 100.
  • Wrong axis: a combination graph has two axes, and reading a bar against the price axis gives a wrong value.
  • Cause: a scatter plot shows that two variables move together, not that one causes the other.
  • Scale: equal totals on a radar chart do not mean equal performance in each category.
  • Mixed sets: these charts often appear together with tables, as in Mixed Data Interpretation Sets Combining Multiple Graph Types.

Solved Examples

Example 1

Question: In the scatter data, what is the average test score?

  1. Scores: 40, 50, 55, 65, 70, 80.
  2. Sum = 360.
  3. Average = 360 / 6 = 60.

Answer: 60 marks.

Example 2

Question: What is the average rise in score per extra study hour, from 1 hour to 6 hours?

  1. Score at 1 hour = 40 and at 6 hours = 80.
  2. Rise = 40 over 5 hours.
  3. Average rate = 40 / 5 = 8.

Answer: 8 marks per hour.

Example 3

Question: In the radar data, in which skill is the gap between X and Y the largest, and what is it?

  1. Gaps (X minus Y): 10, -10, -10, -30 and 40.
  2. Largest size of gap: 40, in Speed.

Answer: Speed, with a gap of 40 marks.

Example 4

Question: In the combination graph, what is the percentage change in revenue from Year 1 to Year 3?

  1. Year 1 revenue = 100 × 50 = 5,000.
  2. Year 3 revenue = 150 × 40 = 6,000.
  3. Change = 1,000. 1,000 / 5,000 × 100 = 20%.

Answer: 20%.

Example 5

Question: What is the percentage change in price per unit from Year 1 to Year 3?

  1. Old price = 50 and new price = 40.
  2. Change = -10.
  3. -10 / 50 × 100 = -20%.

Answer: A fall of 20%.

Shortcuts and Tricks

  • Read both axes and their units before reading a single point.
  • For a scatter plot, judge direction first: upward slope means positive, downward means negative.
  • Use the first and last points to estimate an average rate of change quickly.
  • In a combination graph, mark which axis each series uses.
  • On a radar chart, list the values in a small table, as the shape is hard to read.

Common Mistakes

  • Reading a bar against the wrong axis in a combination graph.
  • Saying one variable causes the other from a scatter plot.
  • Predicting values far beyond the plotted range.
  • Treating equal radar totals as equal performance.
  • Forgetting that a percentage fall is measured on the old value.

Practice Questions

  1. What is the average number of study hours in the scatter data?
  2. What is the test score gain from 3 hours to 4 hours?
  3. In the radar data, what is the total of Candidate Y?
  4. In which skill is Y ahead of X by the most?
  5. What is the Year 2 revenue in the combination graph?
  6. By what percentage did units sold rise from Year 1 to Year 3?

Answers: 1) 3.5; 2) 10 marks; 3) 350; 4) Memory, by 30; 5) Rs 5,400; 6) 50%.

Why Is This Topic Important?

  • Level These charts are common in CAT and in newer exam patterns.
  • Skill They test reading two variables at once.
  • Link to growth Rates of change use the methods in Data Interpretation Involving Ratio and Percentage Change Across Multiple Years.
  • Link to speed They reward the estimation methods in Approximation-Based Techniques for Fast Calculation in Data Interpretation.

What Comes Next?

The next topic is Approximation-Based Techniques for Fast Calculation in Data Interpretation. It teaches approximation techniques that make all of these chart readings faster.

Key Terms and Formulas

  • Scatter plot A chart with one dot for each pair of values
  • Radar chart A chart with categories on spokes from a centre
  • Combination graph A chart that mixes bars and a line
  • Positive relationship Both variables rise together
  • Secondary axis A second scale for the line in a combination graph
  • Average rate of change Change in one variable per unit change in the other
  • Data Interpretation Involving Ratio and Percentage Change Across Multiple Years
  • Approximation-Based Techniques for Fast Calculation in Data Interpretation
  • Data Interpretation from Tables
  • Data Interpretation from Bar Graphs and Line Graphs

Exam Corner

Points to Remember

  • Read both axes first.
  • A pattern shows a relationship, not a cause.
  • Equal totals can hide different shapes.
  • A combination graph has two scales.
  • Do not predict far outside the plotted range.

Do Not Confuse With

  • Relationship vs cause Moving together does not mean one causes the other.
  • Radar total vs shape The same total can have very different shapes.
  • Bar axis vs line axis The two series in a combination graph use different scales.
  • Interpolation vs extrapolation Reading between plotted points is safer than reading beyond them.

Memory Hook

Two axes, two variables, one careful reading.

GS Relevance

Scatter, radar and combination-graph data interpretation for CAT, SSC CGL and CSAT: reading two variables, comparing categories and judging relationships.

Frequently Asked Questions

What is a scatter plot in data interpretation?

A scatter plot in data interpretation is a chart in which each dot shows a pair of values, one on each axis. The pattern of dots shows whether two variables rise together, fall together or have no clear link, but it does not prove that one causes the other.

How do you read a radar chart?

A radar chart is read by locating each category on its spoke from the centre and reading the value where the series point lies. Because shapes are hard to compare by eye, the values should be listed in a table, and equal totals can still hide very different strengths.

What is a combination graph?

A combination graph is a chart that draws one quantity as bars and another as a line, usually with two vertical scales. In the practice data, units sold are bars and price per unit is a line, and revenue is found by multiplying the two values for each year.

How do you find an average rate of change from a scatter plot?

An average rate of change from a scatter plot is the change in the second variable divided by the change in the first. In the practice data, scores rise from 40 to 80 as study hours rise from 1 to 6, which is 40 marks over 5 hours, or 8 marks per hour.

Does a scatter plot prove that one variable causes another?

A scatter plot does not prove that one variable causes another. It only shows that two variables move together, and a third factor or chance may explain the pattern, so conclusions in an exam should be limited to the relationship that the data displays.

PYQ Practice — Statement Analysis

1 A scatter plot proves that one variable causes the other.
False

It shows a relationship only.

2 In a combination graph, the bars and the line may use different scales.
True

Each series must be read against its own axis.

3 If units rise 50 per cent and price falls 20 per cent, revenue falls.
False

1.5 × 0.8 = 1.2, so revenue rises 20 per cent.

4 Two radar chart series with equal totals must have equal values in every category.
False

Equal totals can come from very different values.

Share: