An Initiative by SAARTHI IAS
Maarg Manthan · Topic 13.8

Condition for Existence of Sum to Infinity of a Geometric Progression

Quantitative Aptitude › Progressions – AP, GP, HP · Topic 13.8

The sum to infinity of a geometric progression exists only when the absolute value of the common ratio is less than 1, that is -1 < r < 1. In that case the sum equals a/(1 - r); otherwise the series does not converge to a finite value.

Share:
Condition for Existence of Sum to Infinity of a Geometric Progression - Quantitative Aptitude - MaargX UPSC Maarg Manthan

Quick Answer

The sum to infinity of a geometric progression exists only when the absolute value of the common ratio is less than 1, that is -1 < r < 1. In that case the sum equals a/(1 – r); otherwise the series does not converge to a finite value.

At a Glance

  • Condition -1 < r < 1
  • Sum a/(1 – r)
  • If |r| ≥ 1 No finite sum
  • Alternating case Negative r gives a finite sum if |r| < 1
  • Applications Recurring decimals, bouncing ball

Where Does It Fit?

This topic completes Geometric Progression – nth Term and Sum of n Terms (Finite and Infinite Series) with the exact condition for an infinite sum. It supports Arithmetico-Geometric Progression (CAT-Level) and gives the method used in Recurring Decimal to Fraction Conversion for recurring decimals.

When Does an Infinite GP Have a Finite Sum?

In short: the terms must shrink towards zero. That happens exactly when the common ratio r satisfies -1 < r < 1.

Ratio r Behaviour of terms Finite sum? Example
1/2 Shrink to 0 Yes 8 + 4 + 2 + … = 16
-1/3 Shrink, alternating signs Yes 9 – 3 + 1 – … = 27/4
1 Constant No 5 + 5 + 5 + …
-1 Alternate between two values No 1 – 1 + 1 – …
2 Grow without limit No 1 + 2 + 4 + …

Why a/(1 – r)

  • The sum of n terms is a(1 – r^n)/(1 – r).
  • If |r| < 1, then r^n tends to 0 as n grows, leaving a/(1 – r).

How Do You Use the Sum to Infinity?

  • Find the ratio from the sum: if S = 12 and a = 3, then 12 = 3/(1 – r), so r = 3/4.
  • Recurring decimals: 0.2727… = 0.27/(1 – 0.01) = 27/99 = 3/11, using the method in Recurring Decimal to Fraction Conversion.
  • Series in x: 1 + x + x² + … = 1/(1 – x) only for |x| < 1.
  • Bouncing ball: a ball is dropped from 10 m and rebounds to 3/5 of its previous height each time. The total distance is 10 + 2 × (6 + 3.6 + …) = 10 + 2 × 6/(1 – 3/5) = 10 + 30 = 40 m.

What Conditions Hide in Word Problems?

  • Parameter ranges: in 1 + x/2 + x²/4 + …, the ratio is x/2, so the sum exists for -2 < x < 2.
  • Alternating signs: a negative ratio still converges if |r| < 1.
  • Area and perimeter patterns: repeated halving of squares gives a geometric series with r = 1/2 for the areas.

Solved Examples

Example 1

Question: Find 9 – 3 + 1 – 1/3 + … to infinity.

  1. a = 9, r = -1/3, and |r| < 1.
  2. S = 9/(1 + 1/3) = 9/(4/3).

Answer: 27/4

Example 2

Question: The sum to infinity of a GP is 12 and its first term is 3. Find r.

  1. 12 = 3/(1 – r).
  2. 1 – r = 3/12 = 1/4.

Answer: r = 3/4

Example 3

Question: Convert 0.2727… into a fraction.

  1. a = 0.27 and r = 0.01.
  2. S = 0.27/0.99.

Answer: 3/11

Example 4

Question: A ball dropped from 10 m rebounds to 3/5 of its height each time. Find the total distance it travels.

  1. Down: 10. Up and down after each bounce: 2 × (6, 3.6, …).
  2. Sum of 6 + 3.6 + … = 6/(1 – 0.6) = 15.
  3. Total = 10 + 2 × 15.

Answer: 40 m

Example 5

Question: For what values of x does 1 + x/2 + x²/4 + … have a finite sum?

  1. The ratio is x/2.
  2. |x/2| < 1 gives |x| < 2.

Answer: -2 < x < 2

Shortcuts and Tricks

  • State the condition |r| < 1 before using a/(1 – r).
  • For the ratio from a given sum, use r = 1 – a/S.
  • For a bouncing ball, the total distance is the drop plus twice the sum of the rebound heights.
  • A negative ratio with |r| < 1 gives an alternating series that still converges.
  • If r = 1, the sum is infinite, not a/0.

Common Mistakes

  • Using a/(1 – r) when |r| ≥ 1.
  • Forgetting that the ball travels up and down after each bounce.
  • Treating a negative ratio as divergent.
  • Taking the first rebound height as the first term but forgetting the initial drop.
  • Not simplifying a recurring-decimal fraction.

Practice Questions

  1. Find 1 + 1/3 + 1/9 + … to infinity.
  2. Find 0.4444… as a fraction.
  3. The first term of an infinite GP is 5 and its sum is 20. Find r.
  4. Does 3 + 6 + 12 + … have a finite sum?
  5. Find 16 – 8 + 4 – 2 + … to infinity.

Answers: 1) 3/2; 2) 4/9; 3) 3/4; 4) No; 5) 32/3.

Why Is This Topic Important?

  • Exam use It is the basis of recurring decimals and infinite series questions.
  • Foundation It is the condition behind Geometric Progression – nth Term and Sum of n Terms (Finite and Infinite Series) and Arithmetico-Geometric Progression (CAT-Level).
  • Applications Bouncing balls, areas and repeated fractions.
  • Reasoning It teaches the idea of a limit.

What Comes Next?

The next topic is Progression-Based Word Problems (Increasing Savings, Population Growth in Fixed Steps). It applies progressions to word problems about savings and growth.

Key Terms and Formulas

  • Convergent series An infinite series with a finite sum
  • Divergent series An infinite series without a finite sum
  • Common ratio The fixed multiplier
  • Limit The value that a quantity approaches
  • Alternating series A series whose terms change sign
  • Arithmetico-Geometric Progression (CAT-Level)
  • Progression-Based Word Problems (Increasing Savings, Population Growth in Fixed Steps)
  • Arithmetic Progression – nth Term and Sum of n Terms
  • Geometric Progression – nth Term and Sum of n Terms (Finite and Infinite Series)

Exam Corner

Points to Remember

  • Infinite GP sum exists only for -1 < r < 1.
  • The sum is a/(1 – r).
  • If |r| ≥ 1, there is no finite sum.
  • Find r from the sum using r = 1 – a/S.
  • For bounces, add the drop and twice the rebounds.

Do Not Confuse With

  • Sum of n terms vs sum to infinity The first always exists; the second needs |r| < 1.
  • r = 1 vs r = -1 Neither gives a finite sum.
  • Negative ratio vs divergent Negative ratios converge if |r| < 1.

Memory Hook

Terms must shrink to zero: ratio between minus one and one.

GS Relevance

Series topic for SSC CGL and CAT: testing convergence of a geometric series, finding sums, and applying them to repeating decimals and bouncing balls.

Frequently Asked Questions

When does the sum to infinity of a GP exist?

The sum to infinity of a geometric progression exists only when the common ratio r satisfies -1 less than r less than 1. In that case the sum equals a/(1 - r), where a is the first term. For r = 1/2 and a = 8, the sum is 16.

What is the formula for the sum to infinity of a GP?

The sum to infinity of a geometric progression is a/(1 - r), valid when the absolute value of r is less than 1. For 9 - 3 + 1 - ..., a is 9 and r is -1/3, so the sum is 9/(4/3), which equals 27/4.

Can a negative ratio give a finite sum?

Yes, a negative common ratio gives a finite sum to infinity when its absolute value is less than 1. For the series 16 - 8 + 4 - 2 + ..., the ratio is -1/2, and the sum is 16/(1 + 1/2), which equals 32/3.

How do you find the ratio from the sum to infinity?

The common ratio is found from r = 1 - a/S, where a is the first term and S is the sum to infinity. If S is 12 and a is 3, then r equals 1 - 3/12, which is 3/4.

How is the sum to infinity used for a bouncing ball?

The total distance of a bouncing ball is the initial drop plus twice the sum of an infinite geometric series of rebound heights. For a 10 m drop with rebound ratio 3/5, the total is 10 + 2 × 15, which equals 40 m.

PYQ Practice — Statement Analysis

1 The sum to infinity of a GP exists when |r| < 1.
True

The terms shrink to zero only then.

2 The sum 1 + 2 + 4 + 8 + ... has a finite value.
False

Here r = 2, so the series diverges.

3 9 - 3 + 1 - 1/3 + ... = 27/4.
True

9/(1 + 1/3) = 27/4.

4 For a = 3 and S = 12, the common ratio is 3/4.
True

r = 1 - 3/12.

Share: