Area of a Triangle Using Coordinates of Its Vertices
Quantitative Aptitude › Coordinate Geometry · Topic 21.3
The area of a triangle with vertices (x1, y1), (x2, y2) and (x3, y3) is half the absolute value of x1(y2 - y3) + x2(y3 - y1) + x3(y1 - y2). If this value is zero, the three points lie on one straight line.
6 min read · Quantitative Aptitude · Coordinate Geometry
Quick Answer
The area of a triangle with vertices (x1, y1), (x2, y2) and (x3, y3) is half the absolute value of x1(y2 – y3) + x2(y3 – y1) + x3(y1 – y2). If this value is zero, the three points lie on one straight line.
At a Glance
- Formula ½|x₁(y₂ – y₃) + x₂(y₃ – y₁) + x₃(y₁ – y₂)|
- Zero area The points are collinear
- Always take The absolute value
- Alternative Shoelace method or base times height
- Right triangle on axes ½ × |x| × |y|
Where Does It Fit?
This topic uses the coordinates from Distance Formula and Section Formula to find areas. Its formula extends to polygons in Area of a Polygon Using the Coordinates of Its Vertices, and a zero area gives the test used in Conditions for Collinearity, Parallelism and Perpendicularity of Lines.
What Is the Area Formula for a Triangle in Coordinates?
In short: substitute the three vertices into a fixed expression and take half of its absolute value. No height or base needs to be drawn.
Area formula
- Area = ½ |x₁(y₂ – y₃) + x₂(y₃ – y₁) + x₃(y₁ – y₂)|
- The vertical bars mean the absolute value, since an area cannot be negative.
- The order in which the vertices are taken does not change the area.
| Vertices | Expression inside the bars | Area |
|---|---|---|
| (0, 0), (4, 0), (0, 3) | 0(0 – 3) + 4(3 – 0) + 0(0 – 0) = 12 | 6 |
| (1, 2), (4, 6), (7, 2) | 1(6 – 2) + 4(2 – 2) + 7(2 – 6) = -24 | 12 |
| (2, 3), (-1, 0), (2, -4) | 2(0 + 4) + (-1)(-4 – 3) + 2(3 – 0) = 21 | 10.5 |
| (1, 1), (2, 2), (3, 3) | 1(0) + 2(2 – 1) + 3(1 – 2) = 0 | 0 |
- Collinearity: if the area is zero, the three points are collinear.
- Right triangle with a vertex at the origin: for vertices (0, 0), (a, 0) and (0, b) the area is ½ × |a| × |b|.
What Is the Shoelace Method and When Should You Use Base and Height?
In short: the shoelace method is the same formula written as a table, and base and height is a faster check when two points share a coordinate.
- Shoelace method: write the vertices in a column, repeat the first at the bottom, multiply downwards to the right and upwards to the right, subtract the two sums and halve the absolute value.
- Base and height: if two vertices have the same y-value, they form a horizontal base, and the height is the vertical distance of the third vertex. For (1, 2), (7, 2) and (4, 6), the base is 6 and the height is 4, so the area is 12.
- Missing coordinate: set the expression inside the bars equal to the given area (or zero for collinear points) and solve for the unknown. Remember that the absolute value gives two possible equations.
The shoelace pattern extends to any number of vertices, as shown in Area of a Polygon Using the Coordinates of Its Vertices.
Solved Examples
Example 1
Question: Find the area of the triangle with vertices (0, 0), (4, 0) and (0, 3).
- Substitute: 0(0 – 3) + 4(3 – 0) + 0(0 – 0) = 12.
- Take half: 12/2 = 6.
Answer: 6 square units.
Example 2
Question: Find the area of the triangle with vertices (1, 2), (4, 6) and (7, 2).
- Expression = 1(6 – 2) + 4(2 – 2) + 7(2 – 6) = 4 + 0 – 28 = -24.
- Absolute value 24, half is 12.
- Check: base (1, 2) to (7, 2) is 6, height is 6 – 2 = 4, area 12.
Answer: 12 square units.
Example 3
Question: For what value of k are (1, 2), (3, k) and (5, 6) collinear?
- Set the expression to zero: 1(k – 6) + 3(6 – 2) + 5(2 – k) = 0.
- Expand: k – 6 + 12 + 10 – 5k = 16 – 4k = 0.
- So k = 4.
Answer: k = 4.
Example 4
Question: Find the area of the triangle with vertices (2, 3), (-1, 0) and (2, -4).
- 2(0 + 4) = 8.
- (-1)(-4 – 3) = 7.
- 2(3 – 0) = 6.
- Sum = 21, half is 10.5.
Answer: 10.5 square units.
Example 5
Question: The vertices of a triangle are (0, 0), (6, 0) and (3, h). Find h if the area is 18.
- Base = 6 and area = ½ × 6 × h = 3h.
- 3h = 18, so h = 6 (taking h positive).
Answer: h = 6 (or h = -6).
Shortcuts and Tricks
- If two points have the same x or y coordinate, use base times height instead of the full formula.
- For collinearity, equal slopes between two pairs of points give the same answer as zero area.
- Translate the triangle so one vertex is at the origin. The area is then ½|x₁y₂ – x₂y₁| using the other two vertices.
- Always check by recalculating with the vertices in a different order.
- Keep track of negative signs by writing each bracket separately.
Common Mistakes
- Forgetting the ½ at the end.
- Leaving the answer negative. Area is always the absolute value.
- Mixing the cyclic order of the brackets, such as using (y₂ – y₁) for x₁.
- Sign slips when subtracting negative coordinates.
- Using only one equation when a missing coordinate problem has two possible signs.
Practice Questions
- Find the area of the triangle with vertices (0, 0), (6, 0) and (0, 8).
- Find the area of the triangle with vertices (1, 1), (5, 1) and (3, 5).
- Find k if (2, 3), (4, 6) and (6, k) are collinear.
- Find the area of the triangle with vertices (3, 4), (-1, 1) and (5, -2).
- Find the area of the triangle with vertices (-3, 0), (3, 0) and (0, 6).
Answers: 1) 24 square units; 2) 8 square units; 3) 9; 4) 15 square units; 5) 18 square units.
Why Is This Topic Important?
- Foundation It gives a direct way to find areas without drawing a figure.
- Exam use Missing-coordinate and collinearity questions appear in SSC and CAT papers.
- Speed Base and height solves many questions faster.
- Link to mensuration The area is the same as in Area and Perimeter of Triangle (Including Heron’s Formula), now found from coordinates.
What Comes Next?
The next topic is Midpoint Formula and Centroid of a Triangle Using Coordinates. It uses the same three vertices to find the midpoint of a side and the centroid.
Key Terms and Formulas
- Vertex A corner point of a triangle
- Collinear Lying on one line
- Shoelace method A tabular way to apply the area formula
- Absolute value The size of a number without its sign
- Base The side chosen to measure height from
- Altitude The perpendicular distance from a vertex to the opposite side
Related Topics
- Slope of a Line and Different Forms of the Equation of a Line
- Midpoint Formula and Centroid of a Triangle Using Coordinates
- Distance Formula and Section Formula
- Equation of a Circle in Standard Form
Exam Corner
Points to Remember
- Area = half of the absolute value of the expression.
- Zero area means the points are collinear.
- Vertex order can be any, because the absolute value is taken.
- Equal coordinates give a quick base and height.
- Check the answer with a second method.
Do Not Confuse With
- Area vs expression The expression inside the bars is twice the area, before taking half.
- Collinear vs similar Collinear points lie on a line, but similar triangles are different shapes.
- Signed vs absolute The sign depends on vertex order, but the area does not.
- Base vs side Any side can be the base if the matching height is used.
Memory Hook
Half the absolute value of the cyclic sum; zero means collinear.
GS Relevance
Frequently Asked Questions
What is the formula for the area of a triangle using coordinates?
The area of a triangle with vertices (x1, y1), (x2, y2) and (x3, y3) is half the absolute value of x1(y2 minus y3) plus x2(y3 minus y1) plus x3(y1 minus y2). The absolute value is taken because area cannot be negative, and the order of vertices does not matter.
How do you check whether three points are collinear using area?
To check whether three points are collinear using area, apply the coordinate formula for the area of the triangle formed by them. If the expression equals zero, the area is zero and the three points lie on one straight line; any non-zero area means they form a triangle.
What is the shoelace method for area?
The shoelace method is a table form of the coordinate area formula. The vertices are written in order, the first is repeated at the end, the products down and up are summed and subtracted, and half the absolute difference is the area, which works for any polygon.
When is base and height faster than the coordinate formula?
Base and height is faster when two vertices share the same x or y coordinate, because then one side is horizontal or vertical. The length of that side is the base, the perpendicular gap of the third vertex is the height, and the area is half their product.
How do you find a missing coordinate from a given area?
To find a missing coordinate from a given area, put the unknown into the area expression and set half its absolute value equal to the given area. Because of the absolute value, solve both the positive and negative cases, which may give two valid values of the unknown.
PYQ Practice — Statement Analysis
1 The area of the triangle with vertices (0, 0), (4, 0) and (0, 3) is 12 square units.
The area is half of 4 × 3, which is 6.
2 Three points whose triangle has zero area are collinear.
A zero area means the points lie on one line.
3 The coordinate area formula must be written with an absolute value.
Without it, the sign depends on the order of vertices.
4 The points (1, 1), (2, 2) and (3, 3) form a triangle.
They are collinear, so the area is zero.
Related Topics
Browse the full Quantitative Aptitude index